This is producing double pastes everywhere else

Too many failures where it's stuck in a suspend-wake-up loop

AGENTS.md

@@ -0,0 +1,62 @@
+# Style
+
+- Two spaces for indentation, no tabs
+- Use Bash syntax for conditionals: `[[ -f $file ]]`, not `[ -f "$file" ]`
+
+# Command Naming
+
+All commands start with `omarchy-`. Prefixes indicate purpose:
+
+- `cmd-` - check if commands exist, misc utility commands
+- `pkg-` - package management helpers
+- `hw-` - hardware detection (return exit codes for use in conditionals)
+- `refresh-` - copy default config to user's `~/.config/`
+- `restart-` - restart a component
+- `launch-` - open applications
+- `install-` - install optional software
+- `setup-` - interactive setup wizards
+- `toggle-` - toggle features on/off
+- `theme-` - theme management
+- `update-` - update components
+
+# Helper Commands
+
+Use these instead of raw shell commands:
+
+- `omarchy-cmd-missing` / `omarchy-cmd-present` - check for commands
+- `omarchy-pkg-missing` / `omarchy-pkg-present` - check for packages
+- `omarchy-pkg-add` - install packages (handles both pacman and AUR)
+- `omarchy-hw-asus-rog` - detect ASUS ROG hardware (and similar `hw-*` commands)
+
+# Config Structure
+
+- `config/` - default configs copied to `~/.config/`
+- `default/themed/*.tpl` - templates with `{{ variable }}` placeholders for theme colors
+- `themes/*/colors.toml` - theme color definitions (accent, background, foreground, color0-15)
+
+# Refresh Pattern
+
+To copy a default config to user config with automatic backup:
+
+```bash
+omarchy-refresh-config hypr/hyprlock.conf
+```
+
+This copies `~/.local/share/omarchy/config/hypr/hyprlock.conf` to `~/.config/hypr/hyprlock.conf`.
+
+# Migrations
+
+To create a new migration, run `omarchy-dev-add-migration --no-edit`. This creates a migration file named after the unix timestamp of the last commit.
+
+Migration format:
+- No shebang line
+- Start with an `echo` describing what the migration does
+
+Example:
+```bash
+echo "Disable fingerprint in hyprlock if fingerprint auth is not configured"
+
+if omarchy-cmd-missing fprintd-list || ! fprintd-list "$USER" 2>/dev/null | grep -q "finger"; then
+  sed -i 's/fingerprint:enabled = .*/fingerprint:enabled = false/' ~/.config/hypr/hyprlock.conf
+fi
+```

bin/omarchy-battery-present

@@ -0,0 +1,13 @@
+#!/bin/bash
+
+# Returns true if a battery is present on the system.
+# Used by the battery monitor and other battery-related checks.
+
+for bat in /sys/class/power_supply/BAT*; do
+  [[ -r "$bat/present" ]] &&
+  [[ "$(cat "$bat/present")" == "1" ]] &&
+  [[ "$(cat "$bat/type")" == "Battery" ]] &&
+  exit 0
+done
+
+exit 1

bin/omarchy-branch-set

@@ -3,14 +3,15 @@
 # Set the branch for Omarchy's git repository.
 
 if (($# == 0)); then
-  echo "Usage: omarchy-branch-set [master|dev]"
+  echo "Usage: omarchy-branch-set [master|rc|dev]"
   exit 1
 else
   branch="$1"
 fi
 
-case "$branch" in
-  "master") git -C $OMARCHY_PATH switch master ;;
-  "dev") git -C $OMARCHY_PATH switch dev ;;
-  *) echo "Unknown branch: $branch"; exit 1; ;;
-esac
+if [[ "$branch" != "master" && "$branch" != "rc" && "$branch" != "dev" ]]; then
+  echo "Error: Invalid branch '$branch'. Must be one of: master, rc, dev"
+  exit 1
+fi
+
+git -C $OMARCHY_PATH switch $branch

bin/omarchy-brightness-display

@@ -0,0 +1,21 @@
+#!/bin/bash
+
+# Adjust brightness on the most likely display device.
+# Usage: omarchy-brightness-display <step>
+
+step="${1:-+5%}"
+
+# Start with the first possible output, then refine to the most likely given an order heuristic.
+device="$(ls -1 /sys/class/backlight 2>/dev/null | head -n1)"
+for candidate in amdgpu_bl* intel_backlight acpi_video*; do
+  if [[ -e "/sys/class/backlight/$candidate" ]]; then
+    device="$candidate"
+    break
+  fi
+done
+
+# Set the actual brightness of the display device.
+brightnessctl -d "$device" set "$step" >/dev/null
+
+# Use SwayOSD to display the new brightness setting.
+omarchy-swayosd-brightness "$(brightnessctl -d "$device" -m | cut -d',' -f4 | tr -d '%')"

bin/omarchy-brightness-display-apple

@@ -0,0 +1,12 @@
+#!/bin/bash
+
+# Adjust the brightness on Apple Studio Displays and Apple XDR Displays using asdcontrol.
+
+if [[ $# -eq 0 ]]; then
+  echo "Adjust Apple Display Brightness by passing +5000 or -5000 (or any range from 0-60000)"
+else
+  device="$(sudo asdcontrol --detect /dev/usb/hiddev* | grep ^/dev/usb/hiddev | cut -d: -f1)"
+  sudo asdcontrol "$device" -- "$1" >/dev/null
+  value="$(sudo asdcontrol "$device" | awk -F= '/BRIGHTNESS=/{print $2+0}')"
+  omarchy-swayosd-brightness "$(( value * 100 / 60000 ))"
+fi

bin/omarchy-brightness-keyboard

@@ -0,0 +1,40 @@
+#!/bin/bash
+
+# Adjust keyboard backlight brightness using available steps.
+# Usage: omarchy-brightness-keyboard <up|down>
+
+direction="${1:-up}"
+
+# Find keyboard backlight device (look for *kbd_backlight* pattern in leds class).
+device=""
+for candidate in /sys/class/leds/*kbd_backlight*; do
+  if [[ -e "$candidate" ]]; then
+    device="$(basename "$candidate")"
+    break
+  fi
+done
+
+if [[ -z "$device" ]]; then
+  echo "No keyboard backlight device found" >&2
+  exit 1
+fi
+
+# Get current and max brightness to determine step size.
+max_brightness="$(brightnessctl -d "$device" max)"
+current_brightness="$(brightnessctl -d "$device" get)"
+
+# Calculate step as one unit (keyboards typically have discrete levels like 0-3).
+if [[ "$direction" == "up" ]]; then
+  new_brightness=$((current_brightness + 1))
+  [[ $new_brightness -gt $max_brightness ]] && new_brightness=$max_brightness
+else
+  new_brightness=$((current_brightness - 1))
+  [[ $new_brightness -lt 0 ]] && new_brightness=0
+fi
+
+# Set the new brightness.
+brightnessctl -d "$device" set "$new_brightness" >/dev/null
+
+# Use SwayOSD to display the new brightness setting.
+percent=$((new_brightness * 100 / max_brightness))
+omarchy-swayosd-brightness "$percent"

bin/omarchy-channel-set

@@ -14,7 +14,7 @@
 # and people with a lot of experience managing Linux systems.
 
 if (($# == 0)); then
-  echo "Usage: omarchy-channel-set [stable|edge|dev]"
+  echo "Usage: omarchy-channel-set [stable|rc|edge|dev]"
   exit 1
 else
   channel="$1"
@@ -22,6 +22,7 @@ fi
 
 case "$channel" in
 "stable") omarchy-branch-set "master" && omarchy-refresh-pacman "stable" && sudo pacman -Suu --noconfirm ;;
+"rc") omarchy-branch-set "rc" && omarchy-refresh-pacman "rc" && sudo pacman -Suu --noconfirm ;;
 "edge") omarchy-branch-set "master" && omarchy-refresh-pacman "edge" ;;
 "dev") omarchy-branch-set "dev" && omarchy-refresh-pacman "edge" ;;
 *) echo "Unknown channel: $channel"; exit 1; ;;

bin/omarchy-cmd-apple-display-brightness

@@ -1,16 +0,0 @@
-#!/bin/bash
-
-# Adjust the brightness on Apple Studio Displays and Apple XDR Displays using asdcontrol.
-
-if [[ $# -eq 0 ]]; then
-  echo "Adjust Apple Display Brightness by passing +5000 or -5000 (or any range from 0-60000)"
-else
-  DEVICE="$(sudo asdcontrol --detect /dev/usb/hiddev* | grep ^/dev/usb/hiddev | cut -d: -f1)"
-  sudo asdcontrol "$DEVICE" -- "$1" >/dev/null
-  VALUE="$(sudo asdcontrol "$DEVICE" | awk -F= '/BRIGHTNESS=/{print $2+0}')"
-  swayosd-client \
-    --monitor "$(hyprctl monitors -j | jq -r '.[]|select(.focused==true).name')" \
-    --custom-icon display-brightness \
-    --custom-progress "$(awk -v v="$VALUE" 'BEGIN{printf "%.2f", v/60000}')" \
-    --custom-progress-text "$(( VALUE * 100 / 60000 ))%"
-fi

bin/omarchy-cmd-screenrecord

@@ -14,6 +14,7 @@ fi
 DESKTOP_AUDIO="false"
 MICROPHONE_AUDIO="false"
 WEBCAM="false"
+WEBCAM_DEVICE=""
 STOP_RECORDING="false"
 
 for arg in "$@"; do
@@ -21,6 +22,7 @@ for arg in "$@"; do
     --with-desktop-audio) DESKTOP_AUDIO="true" ;;
     --with-microphone-audio) MICROPHONE_AUDIO="true" ;;
     --with-webcam) WEBCAM="true" ;;
+    --webcam-device=*) WEBCAM_DEVICE="${arg#*=}" ;;
     --stop-recording) STOP_RECORDING="true"
   esac
 done
@@ -32,6 +34,15 @@ cleanup_webcam() {
 start_webcam_overlay() {
   cleanup_webcam
 
+  # Auto-detect first available webcam if none specified
+  if [[ -z "$WEBCAM_DEVICE" ]]; then
+    WEBCAM_DEVICE=$(v4l2-ctl --list-devices 2>/dev/null | grep -m1 "^\s*/dev/video" | tr -d '\t')
+    if [[ -z "$WEBCAM_DEVICE" ]]; then
+      notify-send "No webcam devices found" -u critical -t 3000
+      return 1
+    fi
+  fi
+
   # Get monitor scale
   local scale=$(hyprctl monitors -j | jq -r '.[] | select(.focused == true) | .scale')
 
@@ -41,7 +52,7 @@ start_webcam_overlay() {
   # Try preferred 16:9 resolutions in order, use first available
   local preferred_resolutions=("640x360" "1280x720" "1920x1080")
   local video_size_arg=""
-  local available_formats=$(v4l2-ctl --list-formats-ext -d /dev/video0 2>/dev/null)
+  local available_formats=$(v4l2-ctl --list-formats-ext -d "$WEBCAM_DEVICE" 2>/dev/null)
 
   for resolution in "${preferred_resolutions[@]}"; do
     if echo "$available_formats" | grep -q "$resolution"; then
@@ -50,7 +61,7 @@ start_webcam_overlay() {
     fi
   done
 
-  ffplay -f v4l2 $video_size_arg -framerate 30 /dev/video0 \
+  ffplay -f v4l2 $video_size_arg -framerate 30 "$WEBCAM_DEVICE" \
     -vf "scale=${target_width}:-1" \
     -window_title "WebcamOverlay" \
     -noborder \

bin/omarchy-hibernation-setup

@@ -17,9 +17,11 @@ if [ -f "$MKINITCPIO_CONF" ] && grep -q "^HOOKS+=(resume)$" "$MKINITCPIO_CONF";
   exit 0
 fi
 
-MEM_TOTAL_HUMAN=$(free --human | awk '/Mem/ {print $2}')
-if ! gum confirm "Use $MEM_TOTAL_HUMAN on boot drive to make hibernation available?"; then
-  exit 0
+if [[ $1 != "--force" ]]; then
+  MEM_TOTAL_HUMAN=$(free --human | awk '/Mem/ {print $2}')
+  if ! gum confirm "Use $MEM_TOTAL_HUMAN on boot drive to make hibernation available?"; then
+    exit 0
+  fi
 fi
 
 SWAP_SUBVOLUME="/swap"
@@ -57,14 +59,26 @@ sudo mkdir -p /etc/mkinitcpio.conf.d
 echo "Adding resume hook to $MKINITCPIO_CONF"
 echo "HOOKS+=(resume)" | sudo tee "$MKINITCPIO_CONF" >/dev/null
 
-# Configure suspend-then-hibernate
-echo "Configuring suspend-then-hibernate"
-sudo mkdir -p /etc/systemd/logind.conf.d /etc/systemd/sleep.conf.d
-sudo cp "$OMARCHY_PATH/default/systemd/lid.conf" /etc/systemd/logind.conf.d/
-sudo cp "$OMARCHY_PATH/default/systemd/hibernate.conf" /etc/systemd/sleep.conf.d/
+# Ensure keyboard backlight doesn't prevent sleep
+sudo cp -p "$OMARCHY_PATH/default/systemd/system-sleep/keyboard-backlight" /usr/lib/systemd/system-sleep/
 
-# Regenerate initramfs
+# Use ACPI alarm for RTC wakeup on s2idle systems (needed for suspend-then-hibernate)
+if grep -q "\[s2idle\]" /sys/power/mem_sleep 2>/dev/null; then
+  LIMINE_DROP_IN="/etc/limine-entry-tool.d/rtc-alarm.conf"
+  if [[ ! -f "$LIMINE_DROP_IN" ]]; then
+    echo "Enabling ACPI RTC alarm for s2idle suspend"
+    sudo mkdir -p /etc/limine-entry-tool.d
+    echo 'KERNEL_CMDLINE[default]+="rtc_cmos.use_acpi_alarm=1"' | sudo tee "$LIMINE_DROP_IN" >/dev/null
+  fi
+fi
+
+# Regenerate initramfs and boot entry
 echo "Regenerating initramfs..."
 sudo limine-mkinitcpio
+sudo limine-update
 
-echo "Hibernation enabled"
+echo
+
+if [[ $1 != "--force" ]] && gum confirm "Reboot to enable hibernation?"; then
+  omarchy-cmd-reboot
+fi

bin/omarchy-hw-asus-rog

@@ -0,0 +1,6 @@
+#!/bin/bash
+
+# Detect whether the computer is an Asus ROG machine.
+
+[[ "$(cat /sys/class/dmi/id/sys_vendor 2>/dev/null)" == "ASUSTeK COMPUTER INC." ]] &&
+   grep -q "ROG" /sys/class/dmi/id/product_family 2>/dev/null

bin/omarchy-install-geforce-now

@@ -0,0 +1,17 @@
+#!/bin/bash
+
+# Install and launch Geforce Now.
+
+set -e
+
+omarchy-pkg-add flatpak
+cd /tmp
+
+# Download and run GeForce NOW
+curl -LO https://international.download.nvidia.com/GFNLinux/GeForceNOWSetup.bin
+chmod +x GeForceNOWSetup.bin
+./GeForceNOWSetup.bin
+
+# Ensure a separate browser process not started by GFN is available.
+# If not, it seems like GFN has a tendency to hang on login.
+setsid omarchy-launch-browser

bin/omarchy-install-tailscale

@@ -1,15 +1,10 @@
 #!/bin/bash
 
-# Install the Tailscale mesh VPN service, the tsui TUI management app, and a web app for the Tailscale Admin Console.
+# Install the Tailscale mesh VPN service and a web app for the Tailscale Admin Console.
 
 curl -fsSL https://tailscale.com/install.sh | sh
-curl -fsSL https://neuralink.com/tsui/install.sh | bash
 
 echo -e "\nStarting Tailscale..."
 sudo tailscale up --accept-routes
 
-echo -e "\nAdd tsui to sudoers..."
-echo "$USER ALL=(ALL) NOPASSWD: $(which tsui)" | sudo tee /etc/sudoers.d/tsui
-
-omarchy-tui-install "Tailscale" "sudo tsui" float https://cdn.jsdelivr.net/gh/homarr-labs/dashboard-icons/png/tailscale-light.png
-omarchy-webapp-install "Tailscale Admin Console" "https://login.tailscale.com/admin/machines" https://cdn.jsdelivr.net/gh/homarr-labs/dashboard-icons/png/tailscale-light.png
+omarchy-webapp-install "Tailscale" "https://login.tailscale.com/admin/machines" https://cdn.jsdelivr.net/gh/homarr-labs/dashboard-icons/png/tailscale-light.png

bin/omarchy-launch-walker

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# Launch the Walker application launcher while ensuring that it's data provider (called elephant) is runnig first.
+# Launch the Walker application launcher while ensuring that it's data provider (called elephant) is running first.
 
 # Ensure elephant is running before launching walker
 if ! pgrep -x elephant > /dev/null; then

bin/omarchy-menu

@@ -88,10 +88,11 @@ show_learn_menu() {
 }
 
 show_trigger_menu() {
-  case $(menu "Trigger" "  Capture\n  Share\n󰔎  Toggle") in
+  case $(menu "Trigger" "  Capture\n  Share\n󰔎  Toggle\n  Hardware") in
   *Capture*) show_capture_menu ;;
   *Share*) show_share_menu ;;
   *Toggle*) show_toggle_menu ;;
+  *Hardware*) show_hardware_menu ;;
   *) show_main_menu ;;
   esac
 }
@@ -113,13 +114,43 @@ show_screenshot_menu() {
   esac
 }
 
+get_webcam_list() {
+  v4l2-ctl --list-devices 2>/dev/null | while IFS= read -r line; do
+    if [[ "$line" != $'\t'* && -n "$line" ]]; then
+      local name="$line"
+      IFS= read -r device || break
+      device=$(echo "$device" | tr -d '\t' | head -1)
+      [[ -n "$device" ]] && echo "$device  $name"
+    fi
+  done
+}
+
+show_webcam_select_menu() {
+  local devices=$(get_webcam_list)
+  local count=$(echo "$devices" | grep -c . 2>/dev/null || echo 0)
+
+  if [[ -z "$devices" || "$count" -eq 0 ]]; then
+    notify-send "No webcam devices found" -u critical -t 3000
+    return 1
+  fi
+
+  if [[ "$count" -eq 1 ]]; then
+    echo "$devices" | awk '{print $1}'
+  else
+    menu "Select Webcam" "$devices" | awk '{print $1}'
+  fi
+}
+
 show_screenrecord_menu() {
   omarchy-cmd-screenrecord --stop-recording && exit 0
 
   case $(menu "Screenrecord" "  With desktop audio\n  With desktop + microphone audio\n  With desktop + microphone audio + webcam") in
   *"With desktop audio") omarchy-cmd-screenrecord --with-desktop-audio ;;
   *"With desktop + microphone audio") omarchy-cmd-screenrecord --with-desktop-audio --with-microphone-audio ;;
-  *"With desktop + microphone audio + webcam") omarchy-cmd-screenrecord --with-desktop-audio --with-microphone-audio --with-webcam ;;
+  *"With desktop + microphone audio + webcam")
+    local device=$(show_webcam_select_menu) || { back_to show_capture_menu; return; }
+    omarchy-cmd-screenrecord --with-desktop-audio --with-microphone-audio --with-webcam --webcam-device="$device"
+    ;;
   *) back_to show_capture_menu ;;
   esac
 }
@@ -143,6 +174,13 @@ show_toggle_menu() {
   esac
 }
 
+show_hardware_menu() {
+  case $(menu "Toggle" "  Hybrid GPU") in
+  *"Hybrid GPU"*) present_terminal omarchy-toggle-hybrid-gpu ;;
+  *) show_trigger_menu ;;
+  esac
+}
+
 show_style_menu() {
   case $(menu "Style" "󰸌  Theme\n  Font\n  Background\n  Hyprland\n󱄄  Screensaver\n  About") in
   *Theme*) show_theme_menu ;;
@@ -317,8 +355,9 @@ show_install_ai_menu() {
 }
 
 show_install_gaming_menu() {
-  case $(menu "Install" "  Steam\n  RetroArch [AUR]\n󰍳  Minecraft\n󰖺  Xbox Controller [AUR]") in
+  case $(menu "Install" "  Steam\n󰢹  NVIDIA GeForce NOW\n  RetroArch [AUR]\n󰍳  Minecraft\n󰖺  Xbox Controller [AUR]") in
   *Steam*) present_terminal omarchy-install-steam ;;
+  *GeForce*) present_terminal omarchy-install-geforce-now ;;
   *RetroArch*) aur_install_and_launch "RetroArch" "retroarch retroarch-assets libretro libretro-fbneo" "com.libretro.RetroArch.desktop" ;;
   *Minecraft*) install_and_launch "Minecraft" "minecraft-launcher" "minecraft-launcher" ;;
   *Xbox*) present_terminal omarchy-install-xbox-controllers ;;
@@ -392,11 +431,12 @@ show_install_elixir_menu() {
 }
 
 show_remove_menu() {
-  case $(menu "Remove" "󰣇  Package\n  Web App\n  TUI\n󰵮  Development\n  Dictation\n󰸌  Theme\n󰍲  Windows\n󰈷  Fingerprint\n  Fido2") in
+  case $(menu "Remove" "󰣇  Package\n  Web App\n  TUI\n󰵮  Development\n󰏓  Preinstalls\n  Dictation\n󰸌  Theme\n󰍲  Windows\n󰈷  Fingerprint\n  Fido2") in
   *Package*) terminal omarchy-pkg-remove ;;
   *Web*) present_terminal omarchy-webapp-remove ;;
   *TUI*) present_terminal omarchy-tui-remove ;;
   *Development*) show_remove_development_menu ;;
+  *Preinstalls*) present_terminal omarchy-remove-all ;;
   *Dictation*) present_terminal omarchy-voxtype-remove ;;
   *Theme*) present_terminal omarchy-theme-remove ;;
   *Windows*) present_terminal "omarchy-windows-vm remove" ;;
@@ -407,7 +447,7 @@ show_remove_menu() {
 }
 
 show_remove_development_menu() {
-  case $(menu "Remove" "󰫏  Ruby on Rails\n  JavaScript\n  Go\n  PHP\n  Python\n  Elixir\n  Zig\n  Rust\n  Java\n  .NET\n  OCaml\n  Clojure") in
+  case $(menu "Remove" "󰫏  Ruby on Rails\n  JavaScript\n  Go\n  PHP\n  Python\n  Elixir\n  Zig\n  Rust\n  Java\n  .NET\n  OCaml\n  Clojure") in
   *Rails*) present_terminal "omarchy-remove-dev-env ruby" ;;
   *JavaScript*) show_remove_javascript_menu ;;
   *Go*) present_terminal "omarchy-remove-dev-env go" ;;
@@ -425,7 +465,7 @@ show_remove_development_menu() {
 }
 
 show_remove_javascript_menu() {
-  case $(menu "Remove" "  Node.js\n  Bun\n  Deno") in
+  case $(menu "Remove" "  Node.js\n  Bun\n  Deno") in
   *Node*) present_terminal "omarchy-remove-dev-env node" ;;
   *Bun*) present_terminal "omarchy-remove-dev-env bun" ;;
   *Deno*) present_terminal "omarchy-remove-dev-env deno" ;;
@@ -434,7 +474,7 @@ show_remove_javascript_menu() {
 }
 
 show_remove_php_menu() {
-  case $(menu "Remove" "  PHP\n  Laravel\n  Symfony") in
+  case $(menu "Remove" "  PHP\n  Laravel\n  Symfony") in
   *PHP*) present_terminal "omarchy-remove-dev-env php" ;;
   *Laravel*) present_terminal "omarchy-remove-dev-env laravel" ;;
   *Symfony*) present_terminal "omarchy-remove-dev-env symfony" ;;
@@ -443,7 +483,7 @@ show_remove_php_menu() {
 }
 
 show_remove_elixir_menu() {
-  case $(menu "Remove" "  Elixir\n  Phoenix") in
+  case $(menu "Remove" "  Elixir\n  Phoenix") in
   *Elixir*) present_terminal "omarchy-remove-dev-env elixir" ;;
   *Phoenix*) present_terminal "omarchy-remove-dev-env phoenix" ;;
   *) show_remove_development_menu ;;
@@ -467,8 +507,9 @@ show_update_menu() {
 }
 
 show_update_channel_menu() {
-  case $(menu "Update channel" "🟢 Stable\n🟡 Edge\n🔴 Dev") in
+  case $(menu "Update channel" "🟢 Stable\n🟡 RC\n🟠 Edge\n🔴 Dev") in
   *Stable*) present_terminal "omarchy-channel-set stable" ;;
+  *RC*) present_terminal "omarchy-channel-set rc" ;;
   *Edge*) present_terminal "omarchy-channel-set edge" ;;
   *Dev*) present_terminal "omarchy-channel-set dev" ;;
   *) show_update_menu ;;
@@ -516,6 +557,10 @@ show_update_password_menu() {
   esac
 }
 
+show_about() {
+  omarchy-launch-about
+}
+
 show_system_menu() {
   local options="  Lock\n󱄄  Screensaver"
   [ -f ~/.local/state/omarchy/toggles/suspend-on ] && options="$options\n󰒲  Suspend"
@@ -543,6 +588,7 @@ go_to_menu() {
   *learn*) show_learn_menu ;;
   *trigger*) show_trigger_menu ;;
   *share*) show_share_menu ;;
+  *capture*) show_capture_menu ;;
   *style*) show_style_menu ;;
   *theme*) show_theme_menu ;;
   *screenshot*) show_screenshot_menu ;;
@@ -552,7 +598,7 @@ go_to_menu() {
   *install*) show_install_menu ;;
   *remove*) show_remove_menu ;;
   *update*) show_update_menu ;;
-  *about*) omarchy-launch-about ;;
+  *about*) show_about ;;
   *system*) show_system_menu ;;
   esac
 }

bin/omarchy-refresh-pacman

@@ -7,17 +7,18 @@
 sudo cp -f /etc/pacman.conf /etc/pacman.conf.bak
 sudo cp -f /etc/pacman.d/mirrorlist /etc/pacman.d/mirrorlist.bak
 
-if [[ $1 == "edge" ]]; then
-  sudo cp -f ~/.local/share/omarchy/default/pacman/pacman-edge.conf /etc/pacman.conf
-  sudo cp -f ~/.local/share/omarchy/default/pacman/mirrorlist-edge /etc/pacman.d/mirrorlist
-  echo "Setting channel to edge"
-else
-  sudo cp -f ~/.local/share/omarchy/default/pacman/pacman-stable.conf /etc/pacman.conf
-  sudo cp -f ~/.local/share/omarchy/default/pacman/mirrorlist-stable /etc/pacman.d/mirrorlist
-  echo "Setting channel to stable"
+channel="${1:-stable}"
+
+if [[ "$channel" != "stable" && "$channel" != "rc" && "$channel" != "edge" ]]; then
+  echo "Error: Invalid channel '$channel'. Must be one of: stable, rc, edge"
+  exit 1
 fi
 
+echo "Setting channel to $channel"
 echo
 
+sudo cp -f "$OMARCHY_PATH/default/pacman/pacman-$channel.conf" /etc/pacman.conf
+sudo cp -f "$OMARCHY_PATH/default/pacman/mirrorlist-$channel" /etc/pacman.d/mirrorlist
+
 # Reset all package DBs and then update
 sudo pacman -Syyu --noconfirm

bin/omarchy-refresh-tmux

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# Overwrite the user tmux config with the Omarchy default and reload tmux.
+
+omarchy-refresh-config tmux/tmux.conf

bin/omarchy-refresh-walker

@@ -5,9 +5,17 @@
 # Ensure walker is set to autostart
 mkdir -p ~/.config/autostart/
 cp $OMARCHY_PATH/default/walker/walker.desktop ~/.config/autostart/
+
+# And restarts if it crashes or is killed
+mkdir -p ~/.config/systemd/user/app-walker@autostart.service.d/
+cp $OMARCHY_PATH/default/walker/restart.conf ~/.config/systemd/user/app-walker@autostart.service.d/restart.conf
+
 systemctl --user daemon-reload
 
+# Refresh configs
 omarchy-refresh-config walker/config.toml
 omarchy-refresh-config elephant/calc.toml
 omarchy-refresh-config elephant/desktopapplications.toml
+
+# Restart service
 omarchy-restart-walker

bin/omarchy-remove-all

@@ -0,0 +1,25 @@
+#!/bin/bash
+
+# Remove preinstalled Omarchy applications (web apps, TUIs, and selected packages).
+# This removes all web apps, TUIs, plus specific desktop applications.
+
+if gum confirm "Are you sure you want to remove all preinstalled web apps, TUI wrappers, and desktop applications?"; then
+  echo -e "Removing preinstalled Omarchy applications...\n"
+
+  omarchy-webapp-remove-all
+  omarchy-tui-remove-all
+
+  omarchy-pkg-drop \
+    aether \
+    typora \
+    spotify \
+    libreoffice-fresh \
+    1password-beta \
+    1password-cli \
+    xournalpp \
+    signal-desktop \
+    pinta \
+    obsidian \
+    obs-studio \
+    kdenlive
+fi

bin/omarchy-remove-dev-env

@@ -1,5 +1,8 @@
 #!/bin/bash
 
+# Remove a development environment that was previously installed via omarchy-install-dev-env.
+# Usage: omarchy-remove-dev-env <ruby|node|bun|deno|go|php|laravel|symfony|python|elixir|phoenix|zig|rust|java|dotnet|ocaml|clojure>
+
 if [[ -z "$1" ]]; then
   echo "Usage: omarchy-remove-dev-env <ruby|node|bun|deno|go|php|laravel|symfony|python|elixir|phoenix|zig|rust|java|dotnet|ocaml|clojure>" >&2
   exit 1

bin/omarchy-reset-sudo

@@ -1,4 +1,7 @@
 #!/bin/bash
 
+# Reset the sudo lockout/faillock for the current user.
+# This clears any failed authentication attempts that may have locked the user out.
+
 # Resetting sudo lockout for user
 su -c "faillock --reset --user $USER"

bin/omarchy-restart-app

@@ -1,4 +1,7 @@
 #!/bin/bash
 
+# Restart an application by killing it and relaunching via uwsm.
+# Usage: omarchy-restart-app <application-name>
+
 pkill -x $1
 setsid uwsm-app -- $1 >/dev/null 2>&1 &

bin/omarchy-restart-bluetooth

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# Unblock and restart the bluetooth service.
+
 echo -e "Unblocking bluetooth...\n"
 rfkill unblock bluetooth
 rfkill list bluetooth

bin/omarchy-restart-hypridle

@@ -1,3 +1,5 @@
 #!/bin/bash
 
+# Restart the hypridle service (used for idle detection and auto-lock).
+
 omarchy-restart-app hypridle

bin/omarchy-restart-hyprsunset

@@ -1,3 +1,5 @@
 #!/bin/bash
 
+# Restart the hyprsunset service (used for blue light filtering/night light).
+
 omarchy-restart-app hyprsunset

bin/omarchy-restart-opencode

@@ -2,4 +2,6 @@
 
 # Reload opencode configuration (used by the Omarchy theme switching).
 
-killall -SIGUSR2 opencode
+if pgrep -x opencode >/dev/null; then
+  killall -SIGUSR2 opencode
+fi

bin/omarchy-restart-pipewire

@@ -1,4 +1,6 @@
 #!/bin/bash
 
+# Restart the PipeWire audio service to fix audio issues or apply new configuration.
+
 echo -e "Restarting pipewire audio service...\n"
 systemctl --user restart pipewire.service

bin/omarchy-restart-wifi

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# Unblock and restart the Wi-Fi service.
+
 echo -e "Unblocking wifi...\n"
 rfkill unblock wifi
 rfkill list wifi

bin/omarchy-restart-xcompose

@@ -1,3 +1,5 @@
 #!/bin/bash
 
+# Restart the XCompose input method service (fcitx5) to apply new compose key settings.
+
 omarchy-restart-app fcitx5

bin/omarchy-setup-fingerprint

@@ -58,11 +58,13 @@ EOF
 add_hyprlock_fingerprint_icon() {
   print_info "Adding fingerprint icon to hyprlock placeholder text..."
   sed -i 's/placeholder_text = .*/placeholder_text = <span> Enter Password 󰈷 <\/span>/' ~/.config/hypr/hyprlock.conf
+  sed -i 's/fingerprint:enabled = .*/fingerprint:enabled = true/' ~/.config/hypr/hyprlock.conf
 }
 
 remove_hyprlock_fingerprint_icon() {
   print_info "Removing fingerprint icon from hyprlock placeholder text..."
   sed -i 's/placeholder_text = .*/placeholder_text = Enter Password/' ~/.config/hypr/hyprlock.conf
+  sed -i 's/fingerprint:enabled = .*/fingerprint:enabled = false/' ~/.config/hypr/hyprlock.conf
 }
 
 remove_pam_config() {

bin/omarchy-show-done

@@ -1,4 +1,7 @@
 #!/bin/bash
 
+# Display a "Done!" message with a spinner and wait for user to press any key.
+# Used by various install scripts to indicate completion.
+
 echo
 gum spin --spinner "globe" --title "Done! Press any key to close..." -- bash -c 'read -n 1 -s'

bin/omarchy-show-logo

@@ -1,5 +1,8 @@
 #!/bin/bash
 
+# Display the Omarchy logo in the terminal using green color.
+# Used by various presentation scripts to show branding.
+
 clear
 echo -e "\033[32m"
 cat <~/.local/share/omarchy/logo.txt

bin/omarchy-snapshot

@@ -31,4 +31,6 @@ create)
 restore)
   sudo limine-snapper-restore
   ;;
+delete)
+  sudo snapper -c "$config" delete 0
 esac

bin/omarchy-state

@@ -1,5 +1,9 @@
 #!/bin/bash
 
+# Manage persistent state files for Omarchy toggles and settings.
+# Usage: omarchy-state <set|clear> <state-name-or-pattern>
+# Used to track whether features like suspend, idle lock, etc are enabled or disabled.
+
 STATE_DIR="$HOME/.local/state/omarchy"
 mkdir -p "$STATE_DIR"
 

bin/omarchy-swayosd-brightness

@@ -0,0 +1,15 @@
+#!/bin/bash
+
+# Display brightness level using SwayOSD on the current monitor.
+# Usage: omarchy-swayosd-brightness <percent>
+
+percent="$1"
+
+progress="$(awk -v p="$percent" 'BEGIN{printf "%.2f", p/100}')"
+[[ "$progress" == "0.00" ]] && progress="0.01"
+
+swayosd-client \
+  --monitor "$(hyprctl monitors -j | jq -r '.[]|select(.focused==true).name')" \
+  --custom-icon display-brightness \
+  --custom-progress "$progress" \
+  --custom-progress-text "${percent}%"

bin/omarchy-theme-refresh

@@ -0,0 +1,9 @@
+#!/bin/bash
+
+# Refresh the current theme from its templates.
+
+THEME_NAME_PATH="$HOME/.config/omarchy/current/theme.name"
+
+if [[ -f $THEME_NAME_PATH ]]; then
+  omarchy-theme-set "$(cat $THEME_NAME_PATH)"
+fi

bin/omarchy-theme-set

@@ -57,6 +57,7 @@ omarchy-theme-set-gnome
 omarchy-theme-set-browser
 omarchy-theme-set-vscode
 omarchy-theme-set-obsidian
+omarchy-theme-set-asusctl
 
 # Call hook on theme set
 omarchy-hook theme-set "$THEME_NAME"

bin/omarchy-theme-set-asusctl

@@ -0,0 +1,7 @@
+#!/bin/bash
+
+ASUSCTL_THEME=~/.config/omarchy/current/theme/asusctl.rgb
+
+if omarchy-cmd-present asusctl; then
+  asusctl aura effect static -c $(sed 's/^#//' $ASUSCTL_THEME)
+fi

bin/omarchy-theme-set-browser

@@ -2,7 +2,7 @@
 
 CHROMIUM_THEME=~/.config/omarchy/current/theme/chromium.theme
 
-if omarchy-cmd-present chromium || omarchy-cmd-present helium-browser || omarchy-cmd-present brave; then
+if omarchy-cmd-present chromium || omarchy-cmd-present brave; then
   if [[ -f $CHROMIUM_THEME ]]; then
     THEME_RGB_COLOR=$(<$CHROMIUM_THEME)
     THEME_HEX_COLOR=$(printf '#%02x%02x%02x' ${THEME_RGB_COLOR//,/ })
@@ -13,14 +13,8 @@ if omarchy-cmd-present chromium || omarchy-cmd-present helium-browser || omarchy
   fi
 
   if omarchy-cmd-present chromium; then
-    rm -f /etc/chromium/policies/managed/color.json
-    chromium --no-startup-window --set-theme-color="$THEME_RGB_COLOR" >/dev/null
-
-    if [[ -f ~/.config/omarchy/current/theme/light.mode ]]; then
-      chromium --no-startup-window --set-color-scheme="light" >/dev/null
-    else
-      chromium --no-startup-window --set-color-scheme="dark" >/dev/null
-    fi
+    echo "{\"BrowserThemeColor\": \"$THEME_HEX_COLOR\"}" | tee "/etc/chromium/policies/managed/color.json" >/dev/null
+    chromium --refresh-platform-policy --no-startup-window >/dev/null
   fi
 
   if omarchy-cmd-present brave; then

bin/omarchy-theme-set-templates

@@ -13,22 +13,21 @@ hex_to_rgb() {
 
 # Only generate dynamic templates for themes with a colors.toml definition
 if [[ -f $COLORS_FILE ]]; then
-  # Parse TOML using yq (treating it as YAML since the flat key=value structure is compatible)
-  # We convert 'key = value' to 'key: value' to make it valid YAML, then use yq/jq to generate the replacement commands.
   sed_script=$(mktemp)
 
-  # Generate standard and _strip substitutions
-  sed 's/=/:/' "$COLORS_FILE" | yq -r 'to_entries[] | "s|{{ \(.key) }}|\(.value)|g", "s|{{ \(.key)_strip }}|\(.value | sub("^#";""))|g"' > "$sed_script"
-
-  # Generate _rgb substitutions for hex colors
   while IFS='=' read -r key value; do
-    key=$(echo "$key" | xargs)
-    value=$(echo "$value" | xargs | tr -d '"')
+    key="${key//[\"\' ]/}"                # strip quotes and spaces from key
+    [[ $key && $key != \#* ]] || continue # skip empty lines and comments
+    value="${value#*[\"\']}"
+    value="${value%%[\"\']*}" # extract value between quotes (ignores inline comments)
+
+    printf 's|{{ %s }}|%s|g\n' "$key" "$value"            # {{ key }} -> value
+    printf 's|{{ %s_strip }}|%s|g\n' "$key" "${value#\#}" # {{ key_strip }} -> value without leading #
     if [[ $value =~ ^# ]]; then
       rgb=$(hex_to_rgb "$value")
-      echo "s|{{ ${key}_rgb }}|${rgb}|g" >> "$sed_script"
+      echo "s|{{ ${key}_rgb }}|${rgb}|g"
     fi
-  done < "$COLORS_FILE"
+  done <"$COLORS_FILE" >"$sed_script"
 
   shopt -s nullglob
 
@@ -39,7 +38,7 @@ if [[ -f $COLORS_FILE ]]; then
 
     # Don't overwrite configs already exists in the output directory (copied from theme specific folder)
     if [[ ! -f $output_path ]]; then
-      sed -f "$sed_script" "$tpl" > "$output_path"
+      sed -f "$sed_script" "$tpl" >"$output_path"
     fi
   done
 

bin/omarchy-toggle-hybrid-gpu

@@ -0,0 +1,53 @@
+#!/bin/bash
+
+# Toggle dedicated vs integrated GPU mode via supergfxd (for hybrid gpu laptops, like Asus G14).
+# Requires reboot to take effect.
+
+# Ensure supergfxctl has been installed
+if omarchy-cmd-missing supergfxctl; then
+  omarchy-pkg-add supergfxctl
+  sudo systemctl enable supergfxd
+
+  # Needed to deal with restoring to sleep where going through VFIO first means we don't need to reboot.
+  sudo sed -i "s/\"vfio_enable\": \".*\"/\"vfio_enable\": true/" /etc/supergfxd.conf
+fi
+
+gpu_mode=$(supergfxctl -g)
+
+case "$gpu_mode" in
+"Integrated")
+  if gum confirm "Enable dedicated GPU and reboot?"; then
+    # Switch to hybrid mode
+    sudo sed -i "s/\"mode\": \".*\"/\"mode\": \"Hybrid\"/" /etc/supergfxd.conf
+
+    # Let hybrid mode be the default after system sleep
+    sudo rm -rf /usr/lib/systemd/system-sleep/force-igpu
+
+    # Remove the startup delay override (not needed for Hybrid mode)
+    sudo rm -rf /etc/systemd/system/supergfxd.service.d/delay-start.conf
+
+    omarchy-cmd-reboot
+  fi
+  ;;
+"Hybrid")
+  if gum confirm "Use only integrated GPU and reboot?"; then
+    # Switch to integrated mode
+    sudo sed -i "s/\"mode\": \".*\"/\"mode\": \"Integrated\"/" /etc/supergfxd.conf
+
+    # Force igpu mode after system sleep (or dgpu could get activated)
+    sudo mkdir -p /usr/lib/systemd/system-sleep
+    sudo cp -p  $OMARCHY_PATH/default/systemd/system-sleep/force-igpu /usr/lib/systemd/system-sleep/
+
+    # Delay supergfxd startup to avoid race condition with display manager
+    # that can cause system freeze when booting in Integrated mode
+    sudo mkdir -p /etc/systemd/system/supergfxd.service.d
+    sudo cp -p $OMARCHY_PATH/default/systemd/system/supergfxd.service.d/delay-start.conf /etc/systemd/system/supergfxd.service.d/
+
+    omarchy-cmd-reboot
+  fi
+  ;;
+*)
+  echo "Hybrid GPU not found or in unknown mode."
+  exit 1
+  ;;
+esac

bin/omarchy-tui-remove-all

@@ -0,0 +1,36 @@
+#!/bin/bash
+
+# Remove all TUIs installed via omarchy-tui-install.
+# Identifies TUIs by their Exec pattern (xdg-terminal-exec --app-id=TUI.).
+
+set -e
+
+APP_DIR="${1:-$HOME/.local/share/applications}"
+ICON_DIR="$HOME/.local/share/applications/icons"
+
+echo "Scanning for TUIs in $APP_DIR..."
+
+tui_desktop_files=()
+while IFS= read -r -d '' file; do
+  if grep -q "Exec=xdg-terminal-exec --app-id=TUI\." "$file" 2>/dev/null; then
+    tui_desktop_files+=("$file")
+  fi
+done < <(find "$APP_DIR" -maxdepth 1 -name "*.desktop" -print0 2>/dev/null)
+
+if [[ ${#tui_desktop_files[@]} -eq 0 ]]; then
+  echo "No TUIs found."
+  exit 0
+fi
+
+for file in "${tui_desktop_files[@]}"; do
+  app_name=$(basename "$file" .desktop)
+  echo "Removing TUI: $app_name"
+  rm -f "$file"
+  rm -f "$ICON_DIR/$app_name.png"
+done
+
+if command -v update-desktop-database &>/dev/null; then
+  update-desktop-database "$APP_DIR" &>/dev/null || true
+fi
+
+echo "TUIs removed successfully."

bin/omarchy-update

@@ -2,7 +2,7 @@
 
 set -e
 
-trap 'echo ""; echo -e "\033[0;31mSomething went wrong during the update!\n\nPlease review the output above carefully, correct the error, and retry the update.\n\nIf you need assistance, get help from the community at https://omarchy.org/discord\033[0m"' ERR
+trap 'echo ""; echo -e "\033[0;31mSomething went wrong during the update!\n\nPlease review the output above carefully, correct the error, and retry the update.\n\nIf you need assistance, get help from the community at https://omarchy.org/discord\033[0m";omarchy-snapshot delete' ERR
 
 if [[ $1 == "-y" ]] || omarchy-update-confirm; then
   omarchy-snapshot create || [ $? -eq 127 ]

bin/omarchy-update-aur-pkgs

@@ -0,0 +1,13 @@
+#!/bin/bash
+
+# Update AUR packages if any are installed
+if pacman -Qem >/dev/null; then
+  if omarchy-pkg-aur-accessible; then
+    echo -e "\e[32m\nUpdate AUR packages\e[0m"
+    yay -Sua --noconfirm --cleanafter --ignore gcc14,gcc14-libs
+    echo
+  else
+    echo -e "\e[31m\nAUR is unavailable (so skipping updates)\e[0m"
+    echo
+  fi
+fi

bin/omarchy-update-firmware

@@ -7,5 +7,5 @@ if omarchy-cmd-missing fwupdmgr; then
   omarchy-pkg-add fwupd
 fi
 
-fwupdmgr refresh
+fwupdmgr refresh --force
 sudo fwupdmgr update

bin/omarchy-update-orphan-pkgs

@@ -0,0 +1,10 @@
+#!/bin/bash
+
+orphans=$(pacman -Qtdq || true)
+if [[ -n $orphans ]]; then
+  echo -e "\e[32m\nRemove orphan system packages\e[0m"
+  for pkg in $orphans; do
+    sudo pacman -Rs --noconfirm "$pkg" || true
+  done
+  echo
+fi

bin/omarchy-update-perform

@@ -14,6 +14,8 @@ omarchy-update-keyring
 omarchy-update-available-reset
 omarchy-update-system-pkgs
 omarchy-migrate
+omarchy-update-aur-pkgs
+omarchy-update-orphan-pkgs
 omarchy-hook post-update
 
 omarchy-update-analyze-logs

bin/omarchy-update-system-pkgs

@@ -4,24 +4,3 @@ set -e
 
 echo -e "\e[32m\nUpdate system packages\e[0m"
 sudo pacman -Syyu --noconfirm
-
-# Update AUR packages if any are installed
-if pacman -Qem >/dev/null; then
-  if omarchy-pkg-aur-accessible; then
-    echo -e "\e[32m\nUpdate AUR packages\e[0m"
-    yay -Sua --noconfirm
-    echo
-  else
-    echo -e "\e[31m\nAUR is unavailable (so skipping updates)\e[0m"
-    echo
-  fi
-fi
-
-orphans=$(pacman -Qtdq || true)
-if [[ -n $orphans ]]; then
-  echo -e "\e[32m\nRemove orphan system packages\e[0m"
-  for pkg in $orphans; do
-    sudo pacman -Rs --noconfirm "$pkg" || true
-  done
-  echo
-fi

bin/omarchy-version-channel

@@ -2,6 +2,8 @@
 
 if grep -q "https://stable-mirror.omarchy.org/" /etc/pacman.d/mirrorlist; then
   mirror="stable"
+elif grep -q "https://rc-mirror.omarchy.org/" /etc/pacman.d/mirrorlist; then
+  mirror="rc"
 elif grep -q "https://mirror.omarchy.org/" /etc/pacman.d/mirrorlist; then
   mirror="edge"
 else
@@ -12,6 +14,8 @@ if grep -q "https://pkgs.omarchy.org/stable/" /etc/pacman.conf; then
   pkgs="stable"
 elif grep -q "https://pkgs.omarchy.org/edge/" /etc/pacman.conf; then
   pkgs="edge"
+elif grep -q "https://pkgs.omarchy.org/rc/" /etc/pacman.conf; then
+  pkgs="rc"
 else
   pkgs="unknown"
 fi

bin/omarchy-webapp-remove-all

@@ -0,0 +1,36 @@
+#!/bin/bash
+
+# Remove all web apps installed via omarchy-webapp-install.
+# Identifies web apps by their Exec pattern (omarchy-launch-webapp or omarchy-webapp-handler).
+
+set -e
+
+APP_DIR="${1:-$HOME/.local/share/applications}"
+ICON_DIR="$HOME/.local/share/applications/icons"
+
+echo "Scanning for web apps in $APP_DIR..."
+
+webapp_desktop_files=()
+while IFS= read -r -d '' file; do
+  if grep -q "Exec=omarchy-launch-webapp\|Exec=omarchy-webapp-handler" "$file" 2>/dev/null; then
+    webapp_desktop_files+=("$file")
+  fi
+done < <(find "$APP_DIR" -maxdepth 1 -name "*.desktop" -print0 2>/dev/null)
+
+if [[ ${#webapp_desktop_files[@]} -eq 0 ]]; then
+  echo "No web apps found."
+  exit 0
+fi
+
+for file in "${webapp_desktop_files[@]}"; do
+  app_name=$(basename "$file" .desktop)
+  echo "Removing web app: $app_name"
+  rm -f "$file"
+  rm -f "$ICON_DIR/$app_name.png"
+done
+
+if command -v update-desktop-database &>/dev/null; then
+  update-desktop-database "$APP_DIR" &>/dev/null || true
+fi
+
+echo "Web apps removed successfully."

bin/omarchy-windows-vm

@@ -185,6 +185,8 @@ services:
       DISK_SIZE: "$SELECTED_DISK"
       USERNAME: "$USERNAME"
       PASSWORD: "$PASSWORD"
+      TZ: "$(timedatectl show -p Timezone --value 2>/dev/null || echo UTC)"
+      ARGUMENTS: "-rtc base=localtime,clock=host,driftfix=slew"
     devices:
       - /dev/kvm
       - /dev/net/tun
@@ -240,6 +242,11 @@ EOF
 }
 
 remove_windows() {
+  if ! gum confirm --default=false "Remove Windows VM and delete all associated data?"; then
+    echo "Removal cancelled by user"
+    exit 1
+  fi
+
   echo "Removing Windows VM..."
 
   docker-compose -f "$COMPOSE_FILE" down 2>/dev/null || true
@@ -254,25 +261,6 @@ remove_windows() {
   echo "Windows VM removal completed!"
 }
 
-wait_for_rdp_ready() {
-  local WIN_USER="$1"
-  local WIN_PASS="$2"
-  local TIMEOUT=240
-  local SECONDS=0
-
-  echo "Waiting for Windows VM to be ready..."
-
-  while ! timeout 5s xfreerdp3 /auth-only /cert:ignore /u:"$WIN_USER" /p:"$WIN_PASS" /v:127.0.0.1:3389 &>/dev/null; do
-    sleep 2
-    if [ $SECONDS -gt $TIMEOUT ]; then
-      echo "❌ Timeout waiting for RDP!"
-      echo "   The VM might still be installing Windows."
-      echo "   Check progress at: http://127.0.0.1:8006"
-      return 1
-    fi
-  done
-}
-
 launch_windows() {
   KEEP_ALIVE=false
   if [ "$1" = "--keep-alive" ] || [ "$1" = "-k" ]; then
@@ -309,11 +297,19 @@ launch_windows() {
       notify-send -u critical "Windows VM" "Failed to start Windows VM"
       exit 1
     fi
-  fi
 
-  if ! wait_for_rdp_ready "$WIN_USER" "$WIN_PASS"; then
-    notify-send -u critical "Windows VM" "Did not come alive in time."
-    exit 1
+    echo "Waiting for Windows VM to start..."
+    WAIT_COUNT=0
+    until docker logs omarchy-windows 2>&1 | grep -qi "windows started successfully"; do
+      sleep 2
+      WAIT_COUNT=$((WAIT_COUNT + 1))
+      if [ $WAIT_COUNT -gt 60 ]; then  # 2 minutes timeout
+        echo ""
+        echo "❌ Timeout: Windows VM failed to start within 2 minutes"
+        echo "   Check logs: docker logs omarchy-windows"
+        exit 1
+      fi
+    done
   fi
 
   # Build the connection info
@@ -346,7 +342,7 @@ To stop: omarchy-windows-vm stop"
   # If scale is less than 130%, don't set any scale (use default 100)
 
   # Connect with RDP in fullscreen (auto-detects resolution)
-  xfreerdp3 /u:"$WIN_USER" /p:"$WIN_PASS" /v:127.0.0.1:3389 -grab-keyboard /sound /microphone /cert:ignore /title:"Windows VM - Omarchy" /dynamic-resolution /gfx:AVC444 /floatbar:sticky:off,default:visible,show:fullscreen $RDP_SCALE
+  xfreerdp3 /u:"$WIN_USER" /p:"$WIN_PASS" /v:127.0.0.1:3389 -grab-keyboard /sound /microphone /clipboard /cert:ignore /title:"Windows VM - Omarchy" /dynamic-resolution /gfx:AVC444 /floatbar:sticky:off,default:visible,show:fullscreen $RDP_SCALE
 
   # After RDP closes, stop the container unless --keep-alive was specified
   if [ "$KEEP_ALIVE" = false ]; then

boot.sh

@@ -28,12 +28,10 @@ git clone "https://github.com/${OMARCHY_REPO}.git" ~/.local/share/omarchy >/dev/
 
 # Use custom branch if instructed, otherwise default to master
 OMARCHY_REF="${OMARCHY_REF:-master}"
-if [[ $OMARCHY_REF != "master" ]]; then
-  echo -e "\e[32mUsing branch: $OMARCHY_REF\e[0m"
-  cd ~/.local/share/omarchy
-  git fetch origin "${OMARCHY_REF}" && git checkout "${OMARCHY_REF}"
-  cd -
-fi
+echo -e "\e[32mUsing branch: $OMARCHY_REF\e[0m"
+cd ~/.local/share/omarchy
+git fetch origin "${OMARCHY_REF}" && git checkout "${OMARCHY_REF}"
+cd -
 
 # Set edge mirror for dev installs
 if [[ $OMARCHY_REF == "dev" ]]; then

config/elephant/symbols.toml

@@ -0,0 +1 @@
+command = 'wl-copy && hyprctl dispatch sendshortcut "SHIFT, Insert,"'

config/ghostty/config

@@ -32,3 +32,6 @@ keybind = super+control+shift+alt+arrow_right=resize_split:right,100
 
 # Slowdown mouse scrolling
 mouse-scroll-multiplier = 0.95
+
+# Fix general slowness on hyprland (https://github.com/ghostty-org/ghostty/discussions/3224)
+async-backend = epoll

config/hypr/bindings.conf

@@ -1,6 +1,8 @@
 # Application bindings
 bindd = SUPER, RETURN, Terminal, exec, uwsm-app -- xdg-terminal-exec --dir="$(omarchy-cmd-terminal-cwd)"
+bindd = SUPER SHIFT, RETURN, Browser, exec, omarchy-launch-browser
 bindd = SUPER SHIFT, F, File manager, exec, uwsm-app -- nautilus --new-window
+bindd = SUPER ALT SHIFT, F, File manager (cwd), exec, uwsm-app -- nautilus --new-window "$(omarchy-cmd-terminal-cwd)"
 bindd = SUPER SHIFT, B, Browser, exec, omarchy-launch-browser
 bindd = SUPER SHIFT ALT, B, Browser (private), exec, omarchy-launch-browser --private
 bindd = SUPER SHIFT, M, Music, exec, omarchy-launch-or-focus spotify
@@ -23,6 +25,9 @@ bindd = SUPER SHIFT, P, Google Photos, exec, omarchy-launch-or-focus-webapp "Goo
 bindd = SUPER SHIFT, X, X, exec, omarchy-launch-webapp "https://x.com/"
 bindd = SUPER SHIFT ALT, X, X Post, exec, omarchy-launch-webapp "https://x.com/compose/post"
 
+# Add extra bindings
+# bind = SUPER SHIFT, R, exec, alacritty -e ssh your-server
+
 # Overwrite existing bindings, like putting Omarchy Menu on Super + Space
 # unbind = SUPER, SPACE
 # bindd = SUPER, SPACE, Omarchy menu, exec, omarchy-menu

config/hypr/hyprlock.conf

@@ -39,5 +39,5 @@ input-field {
 }
 
 auth {
-    fingerprint:enabled = true
+    fingerprint:enabled = false
 }

config/hypr/input.conf

@@ -3,6 +3,10 @@
 input {
   # Use multiple keyboard layouts and switch between them with Left Alt + Right Alt
   # kb_layout = us,dk,eu
+
+  # Use a specific keyboard variant if needed (e.g. intl for international keyboards)
+  # kb_variant = intl
+
   kb_options = compose:caps # ,grp:alts_toggle
 
   # Change speed of keyboard repeat

config/omarchy/extensions/menu.sh

@@ -12,3 +12,9 @@
 #   *) back_to show_main_menu ;;
 #   esac
 # }
+# 
+# Example of overriding just the about menu action: (Using zsh instead of bash (default))
+# 
+# show_about() {
+#   exec omarchy-launch-or-focus-tui "zsh -c 'fastfetch; read -k 1'"
+# }

config/swayosd/config.toml

@@ -1,4 +1,4 @@
 [server]
 show_percentage = true
 max_volume = 100
-style = "./style.css"
+style = "~/.config/swayosd/style.css"

config/tmux/tmux.conf

@@ -0,0 +1,67 @@
+# Prefix
+set -g prefix C-Space
+set -g prefix2 C-b
+bind C-Space send-prefix
+
+# General
+set -g default-terminal "tmux-256color"
+set -ag terminal-overrides ",*:RGB"
+set -g mouse on
+set -g base-index 1
+setw -g pane-base-index 1
+set -g renumber-windows on
+set -g history-limit 50000
+set -g escape-time 0
+set -g focus-events on
+set -g set-clipboard on
+setw -g aggressive-resize on
+set -g detach-on-destroy off
+
+# Status bar
+set -g status-position top
+set -g status-interval 5
+set -g status-left-length 30
+set -g status-right-length 50
+set -g window-status-separator ""
+
+# Theme
+set -g status-style "bg=default,fg=default"
+set -g status-left "#[fg=black,bg=blue,bold] #S #[bg=default] "
+set -g status-right "#[fg=blue]#{?client_prefix,PREFIX ,}#[fg=brightblack]#h "
+set -g window-status-format "#[fg=brightblack] #I:#W "
+set -g window-status-current-format "#[fg=blue,bold] #I:#W "
+set -g pane-border-style "fg=brightblack"
+set -g pane-active-border-style "fg=blue"
+set -g message-style "bg=default,fg=blue"
+set -g message-command-style "bg=default,fg=blue"
+set -g mode-style "bg=blue,fg=black"
+setw -g clock-mode-colour blue
+
+# Reload config
+bind M-r source-file ~/.config/tmux/tmux.conf
+
+# Rename window / session
+bind r command-prompt -I "#W" "rename-window -- '%%'"
+bind R command-prompt -I "#S" "rename-session -- '%%'"
+
+# Vi mode for copy
+setw -g mode-keys vi
+bind -T copy-mode-vi v send -X begin-selection
+bind -T copy-mode-vi y send -X copy-selection-and-cancel
+
+# Pane resizing
+bind -r S-Left resize-pane -L 1
+bind -r S-Down resize-pane -D 1
+bind -r S-Up resize-pane -U 1
+bind -r S-Right resize-pane -R 1
+
+# Saner splits that open in the same directory
+bind | split-window -h -c "#{pane_current_path}"
+bind - split-window -v -c "#{pane_current_path}"
+
+# New windows in same directory
+bind c new-window -c "#{pane_current_path}"
+
+# Sessions
+bind C new-session
+bind X kill-session

config/waybar/config.jsonc

@@ -116,6 +116,7 @@
     "format-muted": "",
     "format-icons": {
       "headphone": "",
+      "headset": "",
       "default": ["", "", ""]
     }
   },

config/wiremix/wiremix.toml

@@ -0,0 +1,5 @@
+# overwrites default wiremix configuration
+# defaults: https://github.com/tsowell/wiremix/blob/main/wiremix.toml
+
+[char_sets.default]
+default_device = "⮞"

default/bash/aliases

@@ -21,9 +21,9 @@ if command -v zoxide &> /dev/null; then
   }
 fi
 
-open() {
+open() (
   xdg-open "$@" >/dev/null 2>&1 &
-}
+)
 
 # Directories
 alias ..='cd ..'
@@ -34,6 +34,7 @@ alias ....='cd ../../..'
 alias c='opencode'
 alias d='docker'
 alias r='rails'
+alias t='tmux attach || tmux new -s Work'
 n() { if [ "$#" -eq 0 ]; then nvim .; else nvim "$@"; fi; }
 
 # Git

default/bash/functions

@@ -58,7 +58,7 @@ img2jpg() {
   img="$1"
   shift
 
-  magick "$img" $@ -quality 95 -strip ${img%.*}-optimized.jpg
+  magick "$img" $@ -quality 95 -strip ${img%.*}-converted.jpg
 }
 
 # Transcode any image to JPG image that's great for sharing online without being too big
@@ -66,7 +66,14 @@ img2jpg-small() {
   img="$1"
   shift
 
-  magick "$img" $@ -resize 1080x\> -quality 95 -strip ${img%.*}-optimized.jpg
+  magick "$img" $@ -resize 1080x\> -quality 95 -strip ${img%.*}-small.jpg
+}
+# Transcode any image to JPG image that's great for sharing online without being too big
+img2jpg-medium() {
+  img="$1"
+  shift
+
+  magick "$img" $@ -resize 1800x\> -quality 95 -strip ${img%.*}-medium.jpg
 }
 
 # Transcode any image to compressed-but-lossless PNG
@@ -80,3 +87,24 @@ img2png() {
     -define png:exclude-chunk=all \
     "${img%.*}-optimized.png"
 }
+
+# SSH Port Forwarding Functions
+fip() {
+  [[ $# -lt 2 ]] && echo "Usage: fip <host> <port1> [port2] ..." && return 1
+  local host="$1"
+  shift
+  for port in "$@"; do
+    ssh -f -N -L "$port:localhost:$port" "$host" && echo "Forwarding localhost:$port -> $host:$port"
+  done
+}
+
+dip() {
+  [[ $# -eq 0 ]] && echo "Usage: dip <port1> [port2] ..." && return 1
+  for port in "$@"; do
+    pkill -f "ssh.*-L $port:localhost:$port" && echo "Stopped forwarding port $port" || echo "No forwarding on port $port"
+  done
+}
+
+lip() {
+  pgrep -af "ssh.*-L [0-9]+:localhost:[0-9]+" || echo "No active forwards"
+}

default/bash/init

@@ -3,6 +3,9 @@ if command -v mise &> /dev/null; then
 fi
 
 if command -v starship &> /dev/null; then
+  # clear stale readline state before rendering prompt (prevents artifacts in prompt after abnormal exits like SIGQUIT)
+  __sanitize_prompt() { printf '\r\033[K'; }
+  PROMPT_COMMAND="__sanitize_prompt${PROMPT_COMMAND:+;$PROMPT_COMMAND}"
   eval "$(starship init bash)"
 fi
 

default/bashrc

@@ -9,3 +9,4 @@ source ~/.local/share/omarchy/default/bash/rc
 #
 # Make an alias for invoking commands you use constantly
 # alias p='python'
+# alias cx="claude --permission-mode=plan --allow-dangerously-skip-permissions"

default/hypr/apps.conf

@@ -9,7 +9,9 @@ source = ~/.local/share/omarchy/default/hypr/apps/pip.conf
 source = ~/.local/share/omarchy/default/hypr/apps/qemu.conf
 source = ~/.local/share/omarchy/default/hypr/apps/retroarch.conf
 source = ~/.local/share/omarchy/default/hypr/apps/steam.conf
+source = ~/.local/share/omarchy/default/hypr/apps/geforce.conf
 source = ~/.local/share/omarchy/default/hypr/apps/system.conf
+source = ~/.local/share/omarchy/default/hypr/apps/telegram.conf
 source = ~/.local/share/omarchy/default/hypr/apps/terminals.conf
 source = ~/.local/share/omarchy/default/hypr/apps/walker.conf
 source = ~/.local/share/omarchy/default/hypr/apps/webcam-overlay.conf

default/hypr/apps/bitwarden.conf

@@ -1,2 +1,6 @@
 windowrule = no_screen_share on, match:class ^(Bitwarden)$
 windowrule = tag +floating-window, match:class ^(Bitwarden)$
+
+# Bitwarden Chrome Extension
+windowrule = no_screen_share on, match:class chrome-nngceckbapebfimnlniiiahkandclblb-Default
+windowrule = tag +floating-window, match:class chrome-nngceckbapebfimnlniiiahkandclblb-Default

default/hypr/apps/browser.conf

@@ -1,13 +1,16 @@
 # Browser types
 windowrule = tag +chromium-based-browser, match:class ((google-)?[cC]hrom(e|ium)|[bB]rave-browser|[mM]icrosoft-edge|Vivaldi-stable|helium)
 windowrule = tag +firefox-based-browser, match:class ([fF]irefox|zen|librewolf)
+windowrule = tag -default-opacity, match:tag chromium-based-browser
+windowrule = tag -default-opacity, match:tag firefox-based-browser
+
+# Video apps: remove chromium browser tag so they don't get opacity applied
+windowrule = tag -chromium-based-browser, match:class (chrome-youtube.com__-Default|chrome-app.zoom.us__wc_home-Default)
+windowrule = tag -default-opacity, match:class (chrome-youtube.com__-Default|chrome-app.zoom.us__wc_home-Default)
 
 # Force chromium-based browsers into a tile to deal with --app bug
 windowrule = tile on, match:tag chromium-based-browser
 
 # Only a subtle opacity change, but not for video sites
-windowrule = opacity 1 0.97, match:tag chromium-based-browser
-windowrule = opacity 1 0.97, match:tag firefox-based-browser
-
-# Some video sites should never have opacity applied to them
-windowrule = opacity 1.0 1.0, match:initial_title ((?i)(?:[a-z0-9-]+\.)*youtube\.com_/|app\.zoom\.us_/wc/home)
+windowrule = opacity 1.0 0.97, match:tag chromium-based-browser
+windowrule = opacity 1.0 0.97, match:tag firefox-based-browser

default/hypr/apps/geforce.conf

@@ -0,0 +1,5 @@
+windowrule {
+  name = geforce
+  match:class = GeForceNOW
+  idle_inhibit = fullscreen
+}

default/hypr/apps/jetbrains.conf

@@ -1,22 +1,41 @@
 # Fix splash screen showing in weird places and prevent annoying focus takeovers
-windowrule = tag +jetbrains-splash, match:class ^(jetbrains-.*)$, match:title ^(splash)$, match:float 1
-windowrule = center on, match:tag jetbrains-splash
-windowrule = no_focus on, match:tag jetbrains-splash
-windowrule = border_size 0, match:tag jetbrains-splash
+windowrule {
+    name = jetbrains-splash
+    match:class = ^(jetbrains-.*)$
+    match:title = ^(splash)$
+    match:float = 1
+    tag = +jetbrains-splash
+    center = on
+    no_focus = on
+    border_size = 0
+}
 
 # Center popups/find windows
-windowrule = tag +jetbrains, match:class ^(jetbrains-.*), match:title ^()$, match:float 1
-windowrule = center on, match:tag jetbrains
-
-# Enabling this makes it possible to provide input in popup dialogs (search window, new file, etc.)
-windowrule = stay_focused on, match:tag jetbrains
-windowrule = border_size 0, match:tag jetbrains
-
-# For some reason tag:jetbrains does not work for size rule
-windowrule = min_size (monitor_w*0.5) (monitor_h*0.5), match:class ^(jetbrains-.*), match:title ^()$, match:float 1
+windowrule {
+    name = jetbrains-popup
+    match:class = ^(jetbrains-.*)
+    match:title = ^()$
+    match:float = 1
+    tag = +jetbrains
+    center = on
+    # Enabling this makes it possible to provide input in popup dialogs (search window, new file, etc.)
+    stay_focused = on
+    border_size = 0
+    min_size = (monitor_w*0.5) (monitor_h*0.5)
+  }
 
 # Disable window flicker when autocomplete or tooltips appear
-windowrule = no_initial_focus on, match:class ^(jetbrains-.*)$, match:title ^(win.*)$, match:float 1
+windowrule {
+    name = jetbrains-tooltip
+    match:class = ^(jetbrains-.*)$
+    match:title = ^(win.*)$
+    match:float = 1
+    no_initial_focus = on
+}
 
 # Disable mouse focus
-windowrule = no_follow_mouse on, match:class ^(jetbrains-.*)$
+windowrule {
+    name = jetbrains-focus
+    no_follow_mouse = on
+    match:class = ^(jetbrains-.*)$
+}

default/hypr/apps/pip.conf

@@ -1,5 +1,6 @@
 # Picture-in-picture overlays
 windowrule = tag +pip, match:title (Picture.?in.?[Pp]icture)
+windowrule = tag -default-opacity, match:tag pip
 windowrule = float on, match:tag pip
 windowrule = pin on, match:tag pip
 windowrule = size 600 338, match:tag pip

default/hypr/apps/qemu.conf

@@ -1 +1,2 @@
+windowrule = tag -default-opacity, match:class qemu
 windowrule = opacity 1 1, match:class qemu

default/hypr/apps/retroarch.conf

@@ -1,3 +1,4 @@
 windowrule = fullscreen on, match:class com.libretro.RetroArch
+windowrule = tag -default-opacity, match:class com.libretro.RetroArch
 windowrule = opacity 1 1, match:class com.libretro.RetroArch
 windowrule = idle_inhibit fullscreen, match:class com.libretro.RetroArch

default/hypr/apps/steam.conf

@@ -1,7 +1,8 @@
 # Float Steam
 windowrule = float on, match:class steam
 windowrule = center on, match:class steam, match:title Steam
-windowrule = opacity 1 1, match:class steam
+windowrule = tag -default-opacity, match:class steam.*
+windowrule = opacity 1 1, match:class steam.*
 windowrule = size 1100 700, match:class steam, match:title Steam
 windowrule = size 460 800, match:class steam, match:title Friends List
 windowrule = idle_inhibit fullscreen, match:class steam

default/hypr/apps/system.conf

@@ -12,6 +12,7 @@ windowrule = fullscreen on, match:class org.omarchy.screensaver
 windowrule = float on, match:class org.omarchy.screensaver
 
 # No transparency on media windows
+windowrule = tag -default-opacity, match:class ^(zoom|vlc|mpv|org.kde.kdenlive|com.obsproject.Studio|com.github.PintaProject.Pinta|imv|org.gnome.NautilusPreviewer)$
 windowrule = opacity 1 1, match:class ^(zoom|vlc|mpv|org.kde.kdenlive|com.obsproject.Studio|com.github.PintaProject.Pinta|imv|org.gnome.NautilusPreviewer)$
 
 # Popped window rounding

default/hypr/apps/telegram.conf

@@ -0,0 +1,2 @@
+# Prevent Telegram from stealing focus on new messages
+windowrule = focus_on_activate off, match:class org.telegram.desktop

default/hypr/apps/terminals.conf

@@ -1,2 +1,4 @@
 # Define terminal tag to style them uniformly
 windowrule = tag +terminal, match:class (Alacritty|kitty|com.mitchellh.ghostty)
+windowrule = tag -default-opacity, match:tag terminal
+windowrule = opacity 0.97 0.9, match:tag terminal

default/hypr/bindings/media.conf

@@ -6,14 +6,16 @@ bindeld = ,XF86AudioRaiseVolume, Volume up, exec, $osdclient --output-volume rai
 bindeld = ,XF86AudioLowerVolume, Volume down, exec, $osdclient --output-volume lower
 bindeld = ,XF86AudioMute, Mute, exec, $osdclient --output-volume mute-toggle
 bindeld = ,XF86AudioMicMute, Mute microphone, exec, $osdclient --input-volume mute-toggle
-bindeld = ,XF86MonBrightnessUp, Brightness up, exec, $osdclient --brightness raise
-bindeld = ,XF86MonBrightnessDown, Brightness down, exec, $osdclient --brightness lower
+bindeld = ,XF86MonBrightnessUp, Brightness up, exec, omarchy-brightness-display +5%
+bindeld = ,XF86MonBrightnessDown, Brightness down, exec, omarchy-brightness-display 5%-
+bindeld = ,XF86KbdBrightnessUp, Keyboard brightness up, exec, omarchy-brightness-keyboard up
+bindeld = ,XF86KbdBrightnessDown, Keyboard brightness down, exec, omarchy-brightness-keyboard down
 
 # Precise 1% multimedia adjustments with Alt modifier
 bindeld = ALT, XF86AudioRaiseVolume, Volume up precise, exec, $osdclient --output-volume +1
 bindeld = ALT, XF86AudioLowerVolume, Volume down precise, exec, $osdclient --output-volume -1
-bindeld = ALT, XF86MonBrightnessUp, Brightness up precise, exec, $osdclient --brightness +1
-bindeld = ALT, XF86MonBrightnessDown, Brightness down precise, exec, $osdclient --brightness -1
+bindeld = ALT, XF86MonBrightnessUp, Brightness up precise, exec, omarchy-brightness-display +1%
+bindeld = ALT, XF86MonBrightnessDown, Brightness down precise, exec, omarchy-brightness-display 1%-
 
 # Requires playerctl
 bindld = , XF86AudioNext, Next track, exec, $osdclient --playerctl next

default/hypr/bindings/utilities.conf

@@ -1,6 +1,7 @@
 # Menus
 bindd = SUPER, SPACE, Launch apps, exec, omarchy-launch-walker
 bindd = SUPER CTRL, E, Emoji picker, exec, omarchy-launch-walker -m symbols
+bindd = SUPER CTRL, C, Capture menu, exec, omarchy-menu capture
 bindd = SUPER ALT, SPACE, Omarchy menu, exec, omarchy-menu
 bindd = SUPER, ESCAPE, System menu, exec, omarchy-menu system
 bindld = , XF86PowerOff, Power menu, exec, omarchy-menu system
@@ -28,9 +29,9 @@ bindd = SUPER CTRL, I, Toggle locking on idle, exec, omarchy-toggle-idle
 bindd = SUPER CTRL, N, Toggle nightlight, exec, omarchy-toggle-nightlight
 
 # Control Apple Display brightness
-bindd = CTRL, F1, Apple Display brightness down, exec, omarchy-cmd-apple-display-brightness -5000
-bindd = CTRL, F2, Apple Display brightness up, exec, omarchy-cmd-apple-display-brightness +5000
-bindd = SHIFT CTRL, F2, Apple Display full brightness, exec, omarchy-cmd-apple-display-brightness +60000
+bindd = CTRL, F1, Apple Display brightness down, exec, omarchy-brightness-display-apple -5000
+bindd = CTRL, F2, Apple Display brightness up, exec, omarchy-brightness-display-apple +5000
+bindd = SHIFT CTRL, F2, Apple Display full brightness, exec, omarchy-brightness-display-apple +60000
 
 # Captures
 bindd = , PRINT, Screenshot with editing, exec, omarchy-cmd-screenshot

default/hypr/envs.conf

@@ -6,7 +6,7 @@ env = HYPRCURSOR_SIZE,24
 env = GDK_BACKEND,wayland,x11,*
 env = QT_QPA_PLATFORM,wayland;xcb
 env = QT_STYLE_OVERRIDE,kvantum
-env = SDL_VIDEODRIVER,wayland
+env = SDL_VIDEODRIVER,wayland,x11
 env = MOZ_ENABLE_WAYLAND,1
 env = ELECTRON_OZONE_PLATFORM_HINT,wayland
 env = OZONE_PLATFORM,wayland

default/hypr/looknfeel.conf

@@ -131,9 +131,14 @@ cursor {
     hide_on_key_press = true
 }
 
+# Auto toggle scratchpad on switching workspace from scratchpad
+binds {
+    hide_special_on_workspace_change = true
+}
+
 # Style Gum confirm to match terminal theme
 env = GUM_CONFIRM_PROMPT_FOREGROUND,6       # Cyan
 env = GUM_CONFIRM_SELECTED_FOREGROUND,0     # Black
 env = GUM_CONFIRM_SELECTED_BACKGROUND,2     # Green
-env = GUM_CONFIRM_UNSELECTED_FOREGROUND,0   # Black
+env = GUM_CONFIRM_UNSELECTED_FOREGROUND,7   # White
 env = GUM_CONFIRM_UNSELECTED_BACKGROUND,8   # Dark grey

default/hypr/windows.conf

@@ -2,11 +2,14 @@
 # Hyprland 0.53+ syntax
 windowrule = suppress_event maximize, match:class .*
 
-# Just dash of opacity by default
-windowrule = opacity 0.97 0.9, match:class .*
+# Tag all windows for default opacity (apps can override with -default-opacity tag)
+windowrule = tag +default-opacity, match:class .*
 
 # Fix some dragging issues with XWayland
 windowrule = no_focus on, match:class ^$, match:title ^$, match:xwayland 1, match:float 1, match:fullscreen 0, match:pin 0
 
-# App-specific tweaks
+# App-specific tweaks (may remove default-opacity tag)
 source = ~/.local/share/omarchy/default/hypr/apps.conf
+
+# Apply default opacity after apps have had a chance to opt out
+windowrule = opacity 0.97 0.9, match:tag default-opacity

default/limine/default.conf

@@ -3,7 +3,7 @@ TARGET_OS_NAME="Omarchy"
 ESP_PATH="/boot"
 
 KERNEL_CMDLINE[default]="@@CMDLINE@@"
-KERNEL_CMDLINE[default]+="quiet splash"
+KERNEL_CMDLINE[default]+=" quiet splash"
 
 ENABLE_UKI=yes
 CUSTOM_UKI_NAME="omarchy"

default/omarchy-skill/SKILL.md

@@ -1,5 +1,5 @@
 ---
-name: Omarchy
+name: omarchy
 description: >
   REQUIRED for ANY changes to Linux desktop, window manager, or system config.
   Use when editing ~/.config/hypr/, ~/.config/waybar/, ~/.config/walker/,

default/pacman/mirrorlist-rc

@@ -0,0 +1 @@
+Server = https://rc-mirror.omarchy.org/$repo/os/$arch

default/pacman/pacman-rc.conf

@@ -0,0 +1,30 @@
+# See the pacman.conf(5) manpage for option and repository directives
+
+[options]
+Color
+ILoveCandy
+VerbosePkgLists
+HoldPkg = pacman glibc
+Architecture = auto
+CheckSpace
+ParallelDownloads = 5
+DownloadUser = alpm
+
+# By default, pacman accepts packages signed by keys that its local keyring
+# trusts (see pacman-key and its man page), as well as unsigned packages.
+SigLevel = Required DatabaseOptional
+LocalFileSigLevel = Optional
+
+# pacman searches repositories in the order defined here
+[core]
+Include = /etc/pacman.d/mirrorlist
+
+[extra]
+Include = /etc/pacman.d/mirrorlist
+
+[multilib]
+Include = /etc/pacman.d/mirrorlist
+
+[omarchy]
+SigLevel = Optional TrustAll
+Server = https://pkgs.omarchy.org/edge/$arch

default/systemd/faster-shutdown.conf

@@ -0,0 +1,2 @@
+[Manager]
+DefaultTimeoutStopSec=5s

default/systemd/hibernate.conf

@@ -1,3 +0,0 @@
-[Sleep]
-HibernateDelaySec=30min
-HibernateOnACPower=no

default/systemd/lid.conf

@@ -1,2 +0,0 @@
-[Login]
-HandleLidSwitch=suspend-then-hibernate

default/systemd/system-sleep/force-igpu

@@ -0,0 +1,18 @@
+#!/bin/bash
+
+# Use the Vfio to Integrated trick to turn off NVIDIA dgpu when in integrated mode
+# without needing to restart the computer. This is needed because computers like the Asus G14
+# will wake after suspend in Hybrid mode, even if the system was in Integrated mode before
+# suspending.
+
+if [[ $1 == "post" ]]; then
+  # small delay so the device is fully re-enumerated
+  sleep 4
+
+  # force-bind dGPU to vfio (fully detached from nvidia)
+  /usr/bin/supergfxctl -m Vfio
+  sleep 1
+
+  # then go back to Integrated, which powers it off again
+  /usr/bin/supergfxctl -m Integrated
+fi

default/systemd/system-sleep/keyboard-backlight

@@ -0,0 +1,18 @@
+#!/bin/bash
+
+# Turn off keyboard backlight before hibernate to prevent hang on power-off.
+# The ASUS keyboard controller can block S4 shutdown if LEDs are active.
+
+if [[ $1 == "pre" && $2 == "hibernate" ]]; then
+  device=""
+  for candidate in /sys/class/leds/*kbd_backlight*; do
+    if [[ -e "$candidate" ]]; then
+      device="$(basename "$candidate")"
+      break
+    fi
+  done
+
+  if [[ -n "$device" ]]; then
+    brightnessctl -d "$device" set 0 >/dev/null 2>&1
+  fi
+fi

default/systemd/system/supergfxd.service.d/delay-start.conf

@@ -0,0 +1,6 @@
+[Service]
+# Delay startup to avoid race condition with display manager initialization
+# when booting in Integrated mode. Without this delay, the system can freeze
+# on boot because supergfxd tries to disable the dGPU while the display
+# subsystem is still initializing.
+ExecStartPre=/bin/sleep 5

default/themed/asusctl.rgb.tpl

@@ -0,0 +1 @@
+{{ accent }}

default/walker/restart.conf

@@ -0,0 +1,3 @@
+[Service]
+Restart=always
+RestartSec=2

default/wireplumber/wireplumber.conf.d/alsa-soft-mixer.conf

@@ -0,0 +1,18 @@
+## Use software volume control for all ALSA devices.
+## This prevents hardware mixer quirks (like muffled audio on Realtek codecs)
+## and provides consistent volume behavior across all hardware.
+
+monitor.alsa.rules = [
+  {
+    matches = [
+      {
+        device.name = "~alsa_card.*"
+      }
+    ]
+    actions = {
+      update-props = {
+        api.alsa.soft-mixer = true
+      }
+    }
+  }
+]

install/config/all.sh

@@ -19,6 +19,8 @@ run_logged $OMARCHY_INSTALL/config/fast-shutdown.sh
 run_logged $OMARCHY_INSTALL/config/sudoless-asdcontrol.sh
 run_logged $OMARCHY_INSTALL/config/input-group.sh
 run_logged $OMARCHY_INSTALL/config/omarchy-ai-skill.sh
+run_logged $OMARCHY_INSTALL/config/powerprofilesctl-rules.sh
+run_logged $OMARCHY_INSTALL/config/hibernation.sh
 run_logged $OMARCHY_INSTALL/config/hardware/network.sh
 run_logged $OMARCHY_INSTALL/config/hardware/set-wireless-regdom.sh
 run_logged $OMARCHY_INSTALL/config/hardware/fix-fkeys.sh
@@ -26,6 +28,7 @@ run_logged $OMARCHY_INSTALL/config/hardware/bluetooth.sh
 run_logged $OMARCHY_INSTALL/config/hardware/printer.sh
 run_logged $OMARCHY_INSTALL/config/hardware/usb-autosuspend.sh
 run_logged $OMARCHY_INSTALL/config/hardware/ignore-power-button.sh
+run_logged $OMARCHY_INSTALL/config/hardware/legacy-gpu-terminal.sh
 run_logged $OMARCHY_INSTALL/config/hardware/nvidia.sh
 run_logged $OMARCHY_INSTALL/config/hardware/fix-f13-amd-audio-input.sh
 run_logged $OMARCHY_INSTALL/config/hardware/fix-bcm43xx.sh
@@ -33,3 +36,7 @@ run_logged $OMARCHY_INSTALL/config/hardware/fix-apple-spi-keyboard.sh
 run_logged $OMARCHY_INSTALL/config/hardware/fix-apple-suspend-nvme.sh
 run_logged $OMARCHY_INSTALL/config/hardware/fix-apple-t2.sh
 run_logged $OMARCHY_INSTALL/config/hardware/fix-surface-keyboard.sh
+run_logged $OMARCHY_INSTALL/config/hardware/fix-asus-rog-audio-mixer.sh
+run_logged $OMARCHY_INSTALL/config/hardware/fix-asus-rog-mic.sh
+run_logged $OMARCHY_INSTALL/config/hardware/fix-yt6801-ethernet-adapter.sh
+run_logged $OMARCHY_INSTALL/config/hardware/fix-synaptic-touchpad.sh

install/config/fast-shutdown.sh

@@ -1,7 +1,3 @@
 sudo mkdir -p /etc/systemd/system.conf.d
-
-cat <<EOF | sudo tee /etc/systemd/system.conf.d/10-faster-shutdown.conf
-[Manager]
-DefaultTimeoutStopSec=5s
-EOF
+sudo cp "$OMARCHY_PATH/default/systemd/faster-shutdown.conf" /etc/systemd/system.conf.d/10-faster-shutdown.conf
 sudo systemctl daemon-reload

install/config/hardware/fix-asus-rog-audio-mixer.sh

@@ -0,0 +1,13 @@
+# Fix audio volume on Asus ROG laptops by using a soft mixer.
+
+if omarchy-hw-asus-rog; then
+  mkdir -p ~/.config/wireplumber/wireplumber.conf.d/
+  cp $OMARCHY_PATH/default/wireplumber/wireplumber.conf.d/alsa-soft-mixer.conf ~/.config/wireplumber/wireplumber.conf.d/
+  rm -rf ~/.local/state/wireplumber/default-routes
+
+  # Unmute the Master control on the ALC285 card (often muted by default)
+  card=$(aplay -l 2>/dev/null | grep -i "ALC285" | head -1 | sed 's/card \([0-9]*\).*/\1/')
+  if [[ -n "$card" ]]; then
+    amixer -c "$card" set Master 80% unmute 2>/dev/null
+  fi
+fi

install/config/hardware/fix-asus-rog-mic.sh

@@ -0,0 +1,15 @@
+# Fix internal mic gain on ASUS ROG laptops with Realtek ALC285.
+# The mic boost is way too high by default, causing clipping.
+# Sets levels and stores ALSA state so it persists across reboots.
+
+if omarchy-hw-asus-rog; then
+  for card in /proc/asound/card*/codec*; do
+    if grep -q "ALC285" "$card" 2>/dev/null; then
+      cardnum=$(echo "$card" | grep -oP 'card\K\d+')
+      amixer -c "$cardnum" set 'Internal Mic Boost' 0 >/dev/null 2>&1 || true
+      amixer -c "$cardnum" set 'Capture' 70% >/dev/null 2>&1 || true
+      sudo alsactl store "$cardnum" 2>/dev/null || true
+      break
+    fi
+  done
+fi