Merge pull request #4314 from jmargeta/fix-legacy-mobile-nvidia-cards

Fix driver for older NVIDIA MXxxx mobile GPUs

bin/omarchy-battery-remaining

@@ -1,6 +1,7 @@
 #!/bin/bash
 
 # Returns the battery percentage remaining as an integer.
+# Used by the battery monitor and the Ctrl + Shift + Super + B hotkey.
 
 upower -i $(upower -e | grep BAT) \
 | awk -F: '/percentage/ {

bin/omarchy-branch-set

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# Set the branch for Omarchy's git repository.
+
 if (($# == 0)); then
   echo "Usage: omarchy-branch-set [master|dev]"
   exit 1

bin/omarchy-channel-set

@@ -1,5 +1,18 @@
 #!/bin/bash
 
+# Set the Omarchy channel, which dictates what git branch and package repository is used.
+#
+# Stable uses the master branch, which only sees updates on official releases, and
+# the stable package repository, which typically lags the edge by a month to ensure
+# better compatibility.
+#
+# Edge tracks the latest package repository, but still relies on the master branch,
+# so new packages which require config changes may cause conflicts or errors.
+#
+# Dev tracks the active development dev branch, which may include partial or broken updates,
+# as well as the latest package repository. This should only be used by Omarchy developers
+# and people with a lot of experience managing Linux systems.
+
 if (($# == 0)); then
   echo "Usage: omarchy-channel-set [stable|edge|dev]"
   exit 1
@@ -8,7 +21,7 @@ else
 fi
 
 case "$channel" in
-"stable") omarchy-branch-set "master" && omarchy-refresh-pacman "stable" ;;
+"stable") omarchy-branch-set "master" && omarchy-refresh-pacman "stable" && sudo pacman -Suu --noconfirm ;;
 "edge") omarchy-branch-set "master" && omarchy-refresh-pacman "edge" ;;
 "dev") omarchy-branch-set "dev" && omarchy-refresh-pacman "edge" ;;
 *) echo "Unknown channel: $channel"; exit 1; ;;

bin/omarchy-cmd-apple-display-brightness

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# Adjust the brightness on Apple Studio Displays and Apple XDR Displays using asdcontrol.
+
 if [[ $# -eq 0 ]]; then
   echo "Adjust Apple Display Brightness by passing +5000 or -5000 (or any range from 0-60000)"
 else

bin/omarchy-cmd-audio-switch

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# Switch between audio outputs while preserving the mute status. By default mapped to Super + Mute.
+
 focused_monitor="$(hyprctl monitors -j | jq -r '.[] | select(.focused == true).name')"
 
 sinks=$(pactl -f json list sinks | jq '[.[] | select((.ports | length == 0) or ([.ports[]? | .availability != "not available"] | any))]')

bin/omarchy-cmd-first-run

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# Finish the installation of Omarchy with items that can only be done after logging in.
+
 set -e
 
 FIRST_RUN_MODE=~/.local/state/omarchy/first-run.mode

bin/omarchy-cmd-missing

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# Returns true if any of the commands passed in as arguments are missing on the system.
+
 for cmd in "$@"; do
   if ! command -v "$cmd" &>/dev/null; then
     exit 0

bin/omarchy-cmd-present

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# Returns true if all the commands passed in as arguments exit on the system.
+
 for cmd in "$@"; do
   command -v "$cmd" &>/dev/null || exit 1
 done

bin/omarchy-cmd-reboot

@@ -1,6 +1,13 @@
 #!/bin/bash
 
+# Reboot command that first closes all application windows (thus giving them a chance to save state).
+# This is particularly helpful for applications like Chromium that otherwise won't shutdown cleanly.
+
 omarchy-state clear re*-required
+
+# Schedule the reboot to happen after closing windows (detached from terminal)
+nohup bash -c "sleep 2 && systemctl reboot --no-wall" >/dev/null 2>&1 &
+
+# Now close all windows
 omarchy-hyprland-window-close-all
 sleep 1 # Allow apps like Chrome to shutdown correctly
-systemctl reboot --no-wall

bin/omarchy-cmd-screenrecord

@@ -1,5 +1,8 @@
 #!/bin/bash
 
+# Start and stop a screenrecording, which will be saved to ~/Videos by default.
+# Alternative location can be set via OMARCHY_SCREENRECORD_DIR or XDG_VIDEOS_DIR ENVs.
+
 [[ -f ~/.config/user-dirs.dirs ]] && source ~/.config/user-dirs.dirs
 OUTPUT_DIR="${OMARCHY_SCREENRECORD_DIR:-${XDG_VIDEOS_DIR:-$HOME/Videos}}"
 
@@ -11,6 +14,7 @@ fi
 DESKTOP_AUDIO="false"
 MICROPHONE_AUDIO="false"
 WEBCAM="false"
+WEBCAM_DEVICE=""
 STOP_RECORDING="false"
 
 for arg in "$@"; do
@@ -18,6 +22,7 @@ for arg in "$@"; do
     --with-desktop-audio) DESKTOP_AUDIO="true" ;;
     --with-microphone-audio) MICROPHONE_AUDIO="true" ;;
     --with-webcam) WEBCAM="true" ;;
+    --webcam-device=*) WEBCAM_DEVICE="${arg#*=}" ;;
     --stop-recording) STOP_RECORDING="true"
   esac
 done
@@ -29,6 +34,15 @@ cleanup_webcam() {
 start_webcam_overlay() {
   cleanup_webcam
 
+  # Auto-detect first available webcam if none specified
+  if [[ -z "$WEBCAM_DEVICE" ]]; then
+    WEBCAM_DEVICE=$(v4l2-ctl --list-devices 2>/dev/null | grep -m1 "^\s*/dev/video" | tr -d '\t')
+    if [[ -z "$WEBCAM_DEVICE" ]]; then
+      notify-send "No webcam devices found" -u critical -t 3000
+      return 1
+    fi
+  fi
+
   # Get monitor scale
   local scale=$(hyprctl monitors -j | jq -r '.[] | select(.focused == true) | .scale')
 
@@ -38,7 +52,7 @@ start_webcam_overlay() {
   # Try preferred 16:9 resolutions in order, use first available
   local preferred_resolutions=("640x360" "1280x720" "1920x1080")
   local video_size_arg=""
-  local available_formats=$(v4l2-ctl --list-formats-ext -d /dev/video0 2>/dev/null)
+  local available_formats=$(v4l2-ctl --list-formats-ext -d "$WEBCAM_DEVICE" 2>/dev/null)
 
   for resolution in "${preferred_resolutions[@]}"; do
     if echo "$available_formats" | grep -q "$resolution"; then
@@ -47,7 +61,7 @@ start_webcam_overlay() {
     fi
   done
 
-  ffplay -f v4l2 $video_size_arg -framerate 30 /dev/video0 \
+  ffplay -f v4l2 $video_size_arg -framerate 30 "$WEBCAM_DEVICE" \
     -vf "scale=${target_width}:-1" \
     -window_title "WebcamOverlay" \
     -noborder \

bin/omarchy-cmd-screensaver

@@ -1,11 +1,13 @@
 #!/bin/bash
 
+# Run the Omarchy screensaver using random effects from TTE.
+
 screensaver_in_focus() {
   hyprctl activewindow -j | jq -e '.class == "org.omarchy.screensaver"' >/dev/null 2>&1
 }
 
 exit_screensaver() {
-  hyprctl keyword cursor:invisible false
+  hyprctl keyword cursor:invisible false &>/dev/null || true
   pkill -x tte 2>/dev/null
   pkill -f org.omarchy.screensaver 2>/dev/null
   exit 0

bin/omarchy-cmd-screenshot

@@ -1,5 +1,8 @@
 #!/bin/bash
 
+# Take a screenshot of the whole screen, a specific window, or a user-drawn region.
+# Saves to ~/Pictures by default, but that can be changed via OMARCHY_SCREENSHOT_DIR or XDG_PICTURES_DIR ENVs.
+
 [[ -f ~/.config/user-dirs.dirs ]] && source ~/.config/user-dirs.dirs
 OUTPUT_DIR="${OMARCHY_SCREENSHOT_DIR:-${XDG_PICTURES_DIR:-$HOME/Pictures}}"
 

bin/omarchy-cmd-share

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# Share clipboard, file, or folder using LocalSend. Bound to Super + Ctrl + S by default.
+
 if (($# == 0)); then
   echo "Usage: omarchy-cmd-share [clipboard|file|folder]"
   exit 1

bin/omarchy-cmd-shutdown

@@ -1,6 +1,13 @@
 #!/bin/bash
 
+# Shutdown command that first closes all application windows (thus giving them a chance to save state).
+# This is particularly helpful for applications like Chromium that otherwise won't shutdown cleanly.
+
 omarchy-state clear re*-required
+
+# Schedule the shutdown to happen after closing windows (detached from terminal)
+nohup bash -c "sleep 2 && systemctl poweroff --no-wall" >/dev/null 2>&1 &
+
+# Now close all windows
 omarchy-hyprland-window-close-all
 sleep 1 # Allow apps like Chrome to shutdown correctly
-systemctl poweroff --no-wall

bin/omarchy-cmd-terminal-cwd

@@ -1,5 +1,8 @@
 #!/bin/bash
 
+# Returns the current working directory of the active terminal window,
+# so a new terminal window can be started in the same directory.
+
 # Go from current active terminal to its child shell process and run cwd there
 terminal_pid=$(hyprctl activewindow | awk '/pid:/ {print $2}')
 shell_pid=$(pgrep -P "$terminal_pid" | tail -n1)

bin/omarchy-debug

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# Return exhaustive debugging information about the system to help diagnose problems.
+
 NO_SUDO=false
 PRINT_ONLY=false
 

bin/omarchy-dev-add-migration

@@ -1,5 +1,8 @@
 #!/bin/bash
 
+# Creates a new Omarchy migration named after the unix timestamp of the last commit.
+# Only intended for Omarchy developers.
+
 cd ~/.local/share/omarchy
 migration_file="$HOME/.local/share/omarchy/migrations/$(git log -1 --format=%cd --date=unix).sh"
 touch $migration_file

bin/omarchy-drive-info

@@ -1,6 +1,7 @@
 #!/bin/bash
 
-# Drive, like /dev/nvme0, to display information about
+# Returns drive information about a given volumne, like /dev/nvme0, which is used by omarchy-drive-select.
+
 if (($# == 0)); then
   echo "Usage: omarchy-drive-info [/dev/drive]"
   exit 1

bin/omarchy-drive-select

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-# Select a drive from a list with info that includes space and brand
+# Select a drive from a list with info that includes space and brand. Used by omarchy-drive-set-password.
 
 if (($# == 0)); then
   drives=$(lsblk -dpno NAME | grep -E '/dev/(sd|hd|vd|nvme|mmcblk|xv)')

bin/omarchy-drive-set-password

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# Set a new encryption password for a drive selected.
+
 encrypted_drives=$(blkid -t TYPE=crypto_LUKS -o device)
 
 if [[ -n $encrypted_drives ]]; then

bin/omarchy-font-current

@@ -1,3 +1,6 @@
 #!/bin/bash
 
+# Returns the name of the current monospace font being used by extracting it from the Waybar stylesheet.
+# This can be changed using omarchy-font-set.
+
 grep -oP 'font-family:\s*["'\'']?\K[^;"'\'']+' ~/.config/waybar/style.css | head -n1

bin/omarchy-font-list

@@ -1,3 +1,5 @@
 #!/bin/bash
 
+# Returns a list of all the monospace fonts available on the system that can be set using omarchy-font-set.
+
 fc-list :spacing=100 -f "%{family[0]}\n" | grep -v -i -E 'emoji|signwriting|omarchy' | sort -u

bin/omarchy-font-set

@@ -1,8 +1,11 @@
 #!/bin/bash
 
+# Set the system-wide monospace font that should be used by the terminal, hyprlock, waybar, swayosd, etc.
+# The font name must be one of the ones returned by omarchy-font-list.
+
 font_name="$1"
 
-if [[ -n "$font_name" && "$font_name" != "CNCLD" ]]; then
+if [[ -n "$font_name" ]]; then
   if fc-list | grep -iq "$font_name"; then
     if [[ -f ~/.config/alacritty/alacritty.toml ]]; then
       sed -i "s/family = \".*\"/family = \"$font_name\"/g" ~/.config/alacritty/alacritty.toml

bin/omarchy-hibernation-available

@@ -0,0 +1,18 @@
+#!/bin/bash
+
+# Check if hibernation is supported
+if [[ ! -f /sys/power/image_size ]]; then
+  exit 1
+fi
+
+# Sum all swap sizes (excluding zram)
+SWAPSIZE_KB=$(awk '!/Filename|zram/ {sum += $3} END {print sum+0}' /proc/swaps)
+SWAPSIZE=$(( 1024 * ${SWAPSIZE_KB:-0} ))
+
+HIBERNATION_IMAGE_SIZE=$(cat /sys/power/image_size)
+
+if [[ "$SWAPSIZE" -gt "$HIBERNATION_IMAGE_SIZE" ]] && [[ -f /etc/mkinitcpio.conf.d/omarchy_resume.conf ]]; then
+  exit 0
+else
+  exit 1
+fi

bin/omarchy-hibernation-remove

@@ -0,0 +1,59 @@
+#!/bin/bash
+
+# Removes hibernation setup: disables swap, removes swapfile, removes fstab entry,
+# removes resume hook, and removes suspend-then-hibernate configuration.
+
+MKINITCPIO_CONF="/etc/mkinitcpio.conf.d/omarchy_resume.conf"
+
+# Check if hibernation is configured
+if [ ! -f "$MKINITCPIO_CONF" ] || ! grep -q "^HOOKS+=(resume)$" "$MKINITCPIO_CONF"; then
+  echo "Hibernation is not set up"
+  exit 0
+fi
+
+if ! gum confirm "Remove hibernation setup?"; then
+  exit 0
+fi
+
+SWAP_SUBVOLUME="/swap"
+SWAP_FILE="$SWAP_SUBVOLUME/swapfile"
+
+# Disable swap if active
+if swapon --show | grep -q "$SWAP_FILE"; then
+  echo "Disabling swap on $SWAP_FILE"
+  sudo swapoff "$SWAP_FILE"
+fi
+
+# Remove swapfile
+if [ -f "$SWAP_FILE" ]; then
+  echo "Removing swapfile"
+  sudo rm "$SWAP_FILE"
+fi
+
+# Remove swap subvolume
+if sudo btrfs subvolume show "$SWAP_SUBVOLUME" &>/dev/null; then
+  echo "Removing Btrfs subvolume $SWAP_SUBVOLUME"
+  sudo btrfs subvolume delete "$SWAP_SUBVOLUME"
+fi
+
+# Remove fstab entry
+if grep -Fq "$SWAP_FILE" /etc/fstab; then
+  echo "Removing swapfile from /etc/fstab"
+  sudo cp -a /etc/fstab "/etc/fstab.$(date +%Y%m%d%H%M%S).back"
+  sudo sed -i "\|$SWAP_FILE|d" /etc/fstab
+  sudo sed -i '/^# Btrfs swapfile for system hibernation$/d' /etc/fstab
+fi
+
+# Remove suspend-then-hibernate configuration
+echo "Removing suspend-then-hibernate configuration"
+sudo rm -f /etc/systemd/logind.conf.d/lid.conf
+sudo rm -f /etc/systemd/sleep.conf.d/hibernate.conf
+
+# Remove mkinitcpio resume hook
+echo "Removing resume hook"
+sudo rm "$MKINITCPIO_CONF"
+
+echo "Regenerating initramfs..."
+sudo limine-mkinitcpio
+
+echo "Hibernation removed"

bin/omarchy-hibernation-setup

@@ -0,0 +1,70 @@
+#!/bin/bash
+
+# Creates a swap file in the btrfs subvolume, adds the swap file to /etc/fstab,
+# adds a resume hook to mkinitcpio, and configures suspend-then-hibernate.
+
+if [[ ! -f /sys/power/image_size ]]; then
+  echo -e "\033[31mError: Hibernation is not supported on your system\033[0m" >&2
+  exit 1
+fi
+
+
+MKINITCPIO_CONF="/etc/mkinitcpio.conf.d/omarchy_resume.conf"
+
+# Check if hibernation is already configured
+if [ -f "$MKINITCPIO_CONF" ] && grep -q "^HOOKS+=(resume)$" "$MKINITCPIO_CONF"; then
+  echo "Hibernation is already set up"
+  exit 0
+fi
+
+MEM_TOTAL_HUMAN=$(free --human | awk '/Mem/ {print $2}')
+if ! gum confirm "Use $MEM_TOTAL_HUMAN on boot drive to make hibernation available?"; then
+  exit 0
+fi
+
+SWAP_SUBVOLUME="/swap"
+SWAP_FILE="$SWAP_SUBVOLUME/swapfile"
+
+# Create btrfs subvolume for swap
+if ! sudo btrfs subvolume show "$SWAP_SUBVOLUME" &>/dev/null; then
+  echo "Creating Btrfs subvolume"
+  sudo btrfs subvolume create "$SWAP_SUBVOLUME"
+  sudo chattr +C "$SWAP_SUBVOLUME"
+fi
+
+# Create swapfile
+if ! sudo swaplabel "$SWAP_FILE" &>/dev/null; then
+  echo "Creating swapfile in Btrfs subvolume"
+  MEM_TOTAL_KB="$(awk '/MemTotal/ {print $2}' /proc/meminfo)k"
+  sudo btrfs filesystem mkswapfile -s "$MEM_TOTAL_KB" "$SWAP_FILE"
+fi
+
+# Add swapfile to fstab
+if ! grep -Fq "$SWAP_FILE" /etc/fstab; then
+  echo "Adding swapfile to /etc/fstab"
+  sudo cp -a /etc/fstab "/etc/fstab.$(date +%Y%m%d%H%M%S).back"
+  printf "\n# Btrfs swapfile for system hibernation\n%s none swap defaults,pri=0 0 0\n" "$SWAP_FILE" | sudo tee -a /etc/fstab >/dev/null
+fi
+
+# Enable swap
+if ! swapon --show | grep -q "$SWAP_FILE"; then
+  echo "Enabling swap on $SWAP_FILE"
+  sudo swapon -p 0 "$SWAP_FILE"
+fi
+
+# Add resume hook to mkinitcpio
+sudo mkdir -p /etc/mkinitcpio.conf.d
+echo "Adding resume hook to $MKINITCPIO_CONF"
+echo "HOOKS+=(resume)" | sudo tee "$MKINITCPIO_CONF" >/dev/null
+
+# Configure suspend-then-hibernate
+echo "Configuring suspend-then-hibernate"
+sudo mkdir -p /etc/systemd/logind.conf.d /etc/systemd/sleep.conf.d
+sudo cp "$OMARCHY_PATH/default/systemd/lid.conf" /etc/systemd/logind.conf.d/
+sudo cp "$OMARCHY_PATH/default/systemd/hibernate.conf" /etc/systemd/sleep.conf.d/
+
+# Regenerate initramfs
+echo "Regenerating initramfs..."
+sudo limine-mkinitcpio
+
+echo "Hibernation enabled"

bin/omarchy-hook

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# Run a named hook, like post-update (available in ~/.config/omarchy/hooks/post-update).
+
 set -e
 
 if [[ $# -lt 1 ]]; then

bin/omarchy-hyprland-workspace-toggle-gaps

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# Toggles the window gaps on the active workspace between no gaps and the default 10/5/2.
+
 workspace_id=$(hyprctl activeworkspace -j | jq -r .id)
 gaps=$(hyprctl workspacerules -j | jq -r ".[] | select(.workspaceString==\"$workspace_id\") | .gapsOut[0] // 0")
 

bin/omarchy-install-chromium-google-account

@@ -1,5 +1,8 @@
 #!/bin/bash
 
+# Allow Chromium to sign in to Google accounts by adding the correct
+# oauth client id and secret to ~/.config/chromium-flags.conf.
+
 if [[ -f ~/.config/chromium-flags.conf ]]; then
   CONF=~/.config/chromium-flags.conf
 

bin/omarchy-install-dev-env

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# Install one of the supported development environments. Usually called via Install > Development > * in the Omarchy Menu.
+
 if [[ -z "$1" ]]; then
   echo "Usage: omarchy-install-dev-env <ruby|node|bun|go|laravel|symfony|php|python|elixir|phoenix|rust|java|ocaml|dotnet|clojure>" >&2
   exit 1

bin/omarchy-install-docker-dbs

@@ -1,5 +1,8 @@
 #!/bin/bash
 
+# Install one of the supported databases in a Docker container with the suitable development options.
+# Usually called via Install > Development > Docker DB from the Omarchy Menu.
+
 options=("MySQL" "PostgreSQL" "Redis" "MongoDB" "MariaDB" "MSSQL")
 
 if [[ "$#" -eq 0 ]]; then

bin/omarchy-install-dropbox

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# Install and start the Dropbox service. Must then be authenticated via the web.
+
 echo "Installing all dependencies..."
 omarchy-pkg-add dropbox dropbox-cli libappindicator-gtk3 python-gpgme nautilus-dropbox
 

bin/omarchy-install-steam

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# Install and launch Steam after first letting the user pick the correct grahics card drivers.
+
 set -e
 
 echo "Now pick dependencies matching your graphics card"

bin/omarchy-install-tailscale

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# Install the Tailscale mesh VPN service, the tsui TUI management app, and a web app for the Tailscale Admin Console.
+
 curl -fsSL https://tailscale.com/install.sh | sh
 curl -fsSL https://neuralink.com/tsui/install.sh | bash
 

bin/omarchy-install-terminal

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# Install one of the approved terminals and set it as the default for Omarchy (Super + Return etc).
+
 if (($# == 0)); then
   echo "Usage: omarchy-install-terminal [alacritty|ghostty|kitty]"
   exit 1

bin/omarchy-install-vscode

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# Install VSCode and configure it to use the gnome-libsecret password store, not to update automatically, and to use the current Omarchy theme.
+
 echo "Installing VSCode..."
 omarchy-pkg-add visual-studio-code-bin
 

bin/omarchy-install-xbox-controllers

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# Install support for using Xbox controllers with Steam/RetroArch/etc.
+
 set -e
 
 # Install xpadneo to ensure controllers work out of the box

bin/omarchy-launch-about

@@ -1,3 +1,5 @@
 #!/bin/bash
 
+# Launch the fastfetch TUI that gives information about the current system.
+
 exec omarchy-launch-or-focus-tui "bash -c 'fastfetch; read -n 1 -s'"

bin/omarchy-launch-audio

@@ -1,3 +1,5 @@
 #!/bin/bash
 
+# Launch the Omarchy audio controls TUI (provided by wiremix).
+
 omarchy-launch-or-focus-tui wiremix

bin/omarchy-launch-bluetooth

@@ -1,4 +1,7 @@
 #!/bin/bash
 
+# Launch the Omarchy bluetooth controls TUI (provided by bluetui).
+# Also attempts to unblock bluetooth service if rfkill had blocked it.
+
 rfkill unblock bluetooth
 exec omarchy-launch-or-focus-tui bluetui

bin/omarchy-launch-browser

@@ -1,5 +1,8 @@
 #!/bin/bash
 
+# Launch the default browser as determined by xdg-settings.
+# Automatically converts --private into the correct flag for the given browser.
+
 default_browser=$(xdg-settings get default-web-browser)
 browser_exec=$(sed -n 's/^Exec=\([^ ]*\).*/\1/p' {~/.local,~/.nix-profile,/usr}/share/applications/$default_browser 2>/dev/null | head -1)
 

bin/omarchy-launch-editor

@@ -1,5 +1,8 @@
 #!/bin/bash
 
+# Launch the default editor as determined by $EDITOR (set via ~/.config/uwsm/default) (or nvim if missing).
+# Starts suitable editors in a terminal window and otherwise as a regular application.
+
 omarchy-cmd-present "$EDITOR" || EDITOR=nvim
 
 case "$EDITOR" in

bin/omarchy-launch-floating-terminal-with-presentation

@@ -1,4 +1,7 @@
 #!/bin/bash
 
+# Launch a floating terminal with the Omarchy logo presentation, then execute the command passed in, and finally end with the omarchy-show-done presentation.
+# Used by actions such as Update System.
+
 cmd="$*"
 exec setsid uwsm-app -- xdg-terminal-exec --app-id=org.omarchy.terminal --title=Omarchy -e bash -c "omarchy-show-logo; $cmd; if [ \$? -ne 130 ]; then omarchy-show-done; fi"

bin/omarchy-launch-opencode

@@ -1,3 +0,0 @@
-#!/bin/bash
-
-exec setsid uwsm-app -- xdg-terminal-exec --app-id=org.omarchy.opencode -e bash -c 'cd ~/Work; opencode'

bin/omarchy-launch-or-focus

@@ -1,5 +1,8 @@
 #!/bin/bash
 
+# Launch or focus on a given command identified by the passed in window-pattern.
+# Use by some default bindings, like the one for Spotify, to ensure there is only one instance of the application open.
+
 if (($# == 0)); then
   echo "Usage: omarchy-launch-or-focus [window-pattern] [launch-command]"
   exit 1

bin/omarchy-launch-or-focus-tui

@@ -1,5 +1,8 @@
 #!/bin/bash
 
+# Launch or focus on a given TUI identified by the passed in as the command.
+# Use by commands like omarchy-launch-wifi to ensure there is only one wifi configuration screen open.
+
 APP_ID="org.omarchy.$(basename "$1")"
 LAUNCH_COMMAND="omarchy-launch-tui $@"
 

bin/omarchy-launch-or-focus-webapp

@@ -1,5 +1,8 @@
 #!/bin/bash
 
+# Launch or focus on a given web app identified by the window-pattern.
+# Use by some default bindings, like the one for WhatsApp, to ensure there is only one instance of the application open.
+
 if (($# == 0)); then
   echo "Usage: omarchy-launch-or-focus-webapp [window-pattern] [url-and-flags...]"
   exit 1
@@ -9,4 +12,4 @@ WINDOW_PATTERN="$1"
 shift
 LAUNCH_COMMAND="omarchy-launch-webapp $@"
 
-exec omarchy-launch-or-focus "$WINDOW_PATTERN" "$LAUNCH_COMMAND"
+exec omarchy-launch-or-focus "$WINDOW_PATTERN" "$LAUNCH_COMMAND"

bin/omarchy-launch-screensaver

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# Launch the Omarchy screensaver in the default terminal on the system with the correct font configuration.
+
 # Exit early if we don't have the tte show
 if ! command -v tte &>/dev/null; then
   exit 1

bin/omarchy-launch-tui

@@ -1,3 +1,5 @@
 #!/bin/bash
 
+# Launch the TUI command passed in as an argument in the default terminal with an org.omarchy.COMMAND app id for styling.
+
 exec setsid uwsm-app -- xdg-terminal-exec --app-id=org.omarchy.$(basename $1) -e "$1" "${@:2}"

bin/omarchy-launch-walker

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# Launch the Walker application launcher while ensuring that it's data provider (called elephant) is runnig first.
+
 # Ensure elephant is running before launching walker
 if ! pgrep -x elephant > /dev/null; then
   setsid uwsm-app -- elephant &

bin/omarchy-launch-webapp

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# Launch the passed in URL as a web app in the default browser (or chromium if the default doesn't support --app).
+
 browser=$(xdg-settings get default-web-browser)
 
 case $browser in

bin/omarchy-launch-wifi

@@ -1,4 +1,7 @@
 #!/bin/bash
 
+# Launch the Omarchy wifi controls (provided by the Impala TUI).
+# Attempts to unblock the wifi service first in case it should be been blocked.
+
 rfkill unblock wifi
 omarchy-launch-or-focus-tui impala

bin/omarchy-lock-screen

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# Locks the system using hyprlock, but not before ensuring 1password has also been locked, and the screensaver stopped.
+
 # Lock the screen
 pidof hyprlock || hyprlock &
 

bin/omarchy-menu

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# Launch the Omarchy Menu or takes a parameter to jump straight to a submenu.
+
 export PATH="$HOME/.local/share/omarchy/bin:$PATH"
 
 # Set to true when going directly to a submenu, so we can exit directly
@@ -111,13 +113,43 @@ show_screenshot_menu() {
   esac
 }
 
+get_webcam_list() {
+  v4l2-ctl --list-devices 2>/dev/null | while IFS= read -r line; do
+    if [[ "$line" != $'\t'* && -n "$line" ]]; then
+      local name="$line"
+      IFS= read -r device || break
+      device=$(echo "$device" | tr -d '\t' | head -1)
+      [[ -n "$device" ]] && echo "$device  $name"
+    fi
+  done
+}
+
+show_webcam_select_menu() {
+  local devices=$(get_webcam_list)
+  local count=$(echo "$devices" | grep -c . 2>/dev/null || echo 0)
+
+  if [[ -z "$devices" || "$count" -eq 0 ]]; then
+    notify-send "No webcam devices found" -u critical -t 3000
+    return 1
+  fi
+
+  if [[ "$count" -eq 1 ]]; then
+    echo "$devices" | awk '{print $1}'
+  else
+    menu "Select Webcam" "$devices" | awk '{print $1}'
+  fi
+}
+
 show_screenrecord_menu() {
   omarchy-cmd-screenrecord --stop-recording && exit 0
 
   case $(menu "Screenrecord" "  With desktop audio\n  With desktop + microphone audio\n  With desktop + microphone audio + webcam") in
   *"With desktop audio") omarchy-cmd-screenrecord --with-desktop-audio ;;
   *"With desktop + microphone audio") omarchy-cmd-screenrecord --with-desktop-audio --with-microphone-audio ;;
-  *"With desktop + microphone audio + webcam") omarchy-cmd-screenrecord --with-desktop-audio --with-microphone-audio --with-webcam ;;
+  *"With desktop + microphone audio + webcam")
+    local device=$(show_webcam_select_menu) || { back_to show_capture_menu; return; }
+    omarchy-cmd-screenrecord --with-desktop-audio --with-microphone-audio --with-webcam --webcam-device="$device"
+    ;;
   *) back_to show_capture_menu ;;
   esac
 }
@@ -167,20 +199,20 @@ show_font_menu() {
 }
 
 show_setup_menu() {
-  local options="  Audio\n  Wifi\n󰂯  Bluetooth\n󱐋  Power Profile\n󰍹  Monitors"
+  local options="  Audio\n  Wifi\n󰂯  Bluetooth\n󱐋  Power Profile\n  System Sleep\n󰍹  Monitors"
   [ -f ~/.config/hypr/bindings.conf ] && options="$options\n  Keybindings"
   [ -f ~/.config/hypr/input.conf ] && options="$options\n  Input"
-  options="$options\n  Defaults\n󰱔  DNS\n  Security\n  Config"
+  options="$options\n󰱔  DNS\n  Security\n  Config"
 
   case $(menu "Setup" "$options") in
   *Audio*) omarchy-launch-audio ;;
   *Wifi*) omarchy-launch-wifi ;;
   *Bluetooth*) omarchy-launch-bluetooth ;;
   *Power*) show_setup_power_menu ;;
+  *System*) show_setup_system_menu ;;
   *Monitors*) open_in_editor ~/.config/hypr/monitors.conf ;;
   *Keybindings*) open_in_editor ~/.config/hypr/bindings.conf ;;
   *Input*) open_in_editor ~/.config/hypr/input.conf ;;
-  *Defaults*) open_in_editor ~/.config/uwsm/default ;;
   *DNS*) present_terminal omarchy-setup-dns ;;
   *Security*) show_setup_security_menu ;;
   *Config*) show_setup_config_menu ;;
@@ -198,8 +230,17 @@ show_setup_power_menu() {
   fi
 }
 
+show_setup_security_menu() {
+  case $(menu "Setup" "󰈷  Fingerprint\n  Fido2") in
+  *Fingerprint*) present_terminal omarchy-setup-fingerprint ;;
+  *Fido2*) present_terminal omarchy-setup-fido2 ;;
+  *) show_setup_menu ;;
+  esac
+}
+
 show_setup_config_menu() {
-  case $(menu "Setup" "  Hyprland\n  Hypridle\n  Hyprlock\n  Hyprsunset\n  Swayosd\n󰌧  Walker\n󰍜  Waybar\n󰞅  XCompose") in
+  case $(menu "Setup" "  Defaults\n  Hyprland\n  Hypridle\n  Hyprlock\n  Hyprsunset\n  Swayosd\n󰌧  Walker\n󰍜  Waybar\n󰞅  XCompose") in
+  *Defaults*) open_in_editor ~/.config/uwsm/default ;;
   *Hyprland*) open_in_editor ~/.config/hypr/hyprland.conf ;;
   *Hypridle*) open_in_editor ~/.config/hypr/hypridle.conf && omarchy-restart-hypridle ;;
   *Hyprlock*) open_in_editor ~/.config/hypr/hyprlock.conf ;;
@@ -208,14 +249,29 @@ show_setup_config_menu() {
   *Walker*) open_in_editor ~/.config/walker/config.toml && omarchy-restart-walker ;;
   *Waybar*) open_in_editor ~/.config/waybar/config.jsonc && omarchy-restart-waybar ;;
   *XCompose*) open_in_editor ~/.XCompose && omarchy-restart-xcompose ;;
-  *) show_main_menu ;;
+  *) show_setup_menu ;;
   esac
 }
 
-show_setup_security_menu() {
-  case $(menu "Setup" "󰈷  Fingerprint\n  Fido2") in
-  *Fingerprint*) present_terminal omarchy-setup-fingerprint ;;
-  *Fido2*) present_terminal omarchy-setup-fido2 ;;
+show_setup_system_menu() {
+  local options=""
+
+  if [ -f ~/.local/state/omarchy/toggles/suspend-on ]; then
+    options="$options󰒲  Disable Suspend"
+  else
+    options="$options󰒲  Enable Suspend"
+  fi
+
+  if omarchy-hibernation-available; then
+    options="$options\n󰤁  Disable Hibernate"
+  else
+    options="$options\n󰤁  Enable Hibernate"
+  fi
+
+  case $(menu "System" "$options") in
+  *Suspend*) omarchy-toggle-suspend ;;
+  *"Enable Hibernate"*) present_terminal omarchy-hibernation-setup ;;
+  *"Disable Hibernate"*) present_terminal omarchy-hibernation-remove ;;
   *) show_setup_menu ;;
   esac
 }
@@ -276,10 +332,10 @@ show_install_ai_menu() {
       echo ollama
   )
 
-  case $(menu "Install" "  Dictation [AUR]\n󱚤  Claude Code\n󱚤  Copilot CLI [AUR]\n󱚤  Cursor CLI\n󱚤  Gemini\n󱚤  OpenAI Codex\n󱚤  LM Studio\n󱚤  Ollama\n󱚤  Crush") in
-  *Dictation*) present_terminal "echo 'Installing Hyprwhspr from AUR...'; yay -S --noconfirm hyprwhspr && hyprwhspr setup" ;;
+  case $(menu "Install" "  Dictation\n󱚤  Claude Code\n󱚤  Copilot CLI\n󱚤  Cursor CLI\n󱚤  Gemini\n󱚤  OpenAI Codex\n󱚤  LM Studio\n󱚤  Ollama\n󱚤  Crush") in
+  *Dictation*) present_terminal omarchy-voxtype-install ;;
   *Claude*) install "Claude Code" "claude-code" ;;
-  *Copilot*) aur_install "Copilot CLI" "github-copilot-cli" ;;
+  *Copilot*) install "Copilot CLI" "github-copilot-cli" ;;
   *Cursor*) install "Cursor CLI" "cursor-cli" ;;
   *Gemini*) install "Gemini" "gemini-cli" ;;
   *OpenAI*) install "OpenAI Codex" "openai-codex" ;;
@@ -366,11 +422,12 @@ show_install_elixir_menu() {
 }
 
 show_remove_menu() {
-  case $(menu "Remove" "󰣇  Package\n  Web App\n  TUI\n󰵮  Development\n󰸌  Theme\n󰍲  Windows\n󰈷  Fingerprint\n  Fido2") in
+  case $(menu "Remove" "󰣇  Package\n  Web App\n  TUI\n󰵮  Development\n  Dictation\n󰸌  Theme\n󰍲  Windows\n󰈷  Fingerprint\n  Fido2") in
   *Package*) terminal omarchy-pkg-remove ;;
   *Web*) present_terminal omarchy-webapp-remove ;;
   *TUI*) present_terminal omarchy-tui-remove ;;
   *Development*) show_remove_development_menu ;;
+  *Dictation*) present_terminal omarchy-voxtype-remove ;;
   *Theme*) present_terminal omarchy-theme-remove ;;
   *Windows*) present_terminal "omarchy-windows-vm remove" ;;
   *Fingerprint*) present_terminal "omarchy-setup-fingerprint --remove" ;;
@@ -490,9 +547,16 @@ show_update_password_menu() {
 }
 
 show_system_menu() {
-  case $(menu "System" "  Lock\n󱄄  Screensaver\n󰜉  Restart\n󰐥  Shutdown") in
+  local options="  Lock\n󱄄  Screensaver"
+  [ -f ~/.local/state/omarchy/toggles/suspend-on ] && options="$options\n󰒲  Suspend"
+  omarchy-hibernation-available && options="$options\n󰤁  Hibernate"
+  options="$options\n󰜉  Restart\n󰐥  Shutdown"
+
+  case $(menu "System" "$options") in
   *Lock*) omarchy-lock-screen ;;
   *Screensaver*) omarchy-launch-screensaver force ;;
+  *Suspend*) systemctl suspend ;;
+  *Hibernate*) systemctl hibernate ;;
   *Restart*) omarchy-cmd-reboot ;;
   *Shutdown*) omarchy-cmd-shutdown ;;
   *) back_to show_main_menu ;;

bin/omarchy-menu-keybindings

@@ -1,7 +1,6 @@
 #!/bin/bash
 
-# A script to display Hyprland keybindings defined in your configuration
-# using walker for an interactive search menu.
+# Display Hyprland keybindings defined in your configuration using walker for an interactive search menu.
 
 declare -A KEYCODE_SYM_MAP
 
@@ -176,28 +175,37 @@ prioritize_entries() {
     if (match(line, /System menu/))  prio = 5
     if (match(line, /Theme menu/))  prio = 6
     if (match(line, /Full screen/))  prio = 7
-    if (match(line, /Close window/))  prio = 8
-    if (match(line, /Toggle window floating/))  prio = 9
-    if (match(line, /Toggle window split/))  prio = 10
-    if (match(line, /Universal/))  prio = 11
-    if (match(line, /Clipboard/))  prio = 12
-    if (match(line, /Emoji picker/))  prio = 13
-    if (match(line, /Color picker/))  prio = 14
-    if (match(line, /Screenshot/))  prio = 15
-    if (match(line, /Screenrecording/))  prio = 16
-    if (match(line, /(Switch|Next|Former|Previous).*workspace/))  prio = 17
-    if (match(line, /Move window to workspace/))  prio = 18
-    if (match(line, /Swap window/))  prio = 19
-    if (match(line, /Move window focus/))  prio = 20
-    if (match(line, /Move window$/))  prio = 21
-    if (match(line, /Resize window/))  prio = 22
-    if (match(line, /Expand window/))  prio = 23
-    if (match(line, /Shrink window/))  prio = 24
-    if (match(line, /scratchpad/))  prio = 25
-    if (match(line, /notification/))  prio = 26
-    if (match(line, /Toggle window transparency/))  prio = 27
-    if (match(line, /Toggle workspace gaps/))  prio = 28
-    if (match(line, /Toggle nightlight/))  prio = 29
+    if (match(line, /Full width/))  prio = 8
+    if (match(line, /Close window/))  prio = 9
+    if (match(line, /Close all windows/))  prio = 10
+    if (match(line, /Lock system/))  prio = 11
+    if (match(line, /Toggle window floating/))  prio = 12
+    if (match(line, /Toggle window split/))  prio = 13
+    if (match(line, /Pop window/))  prio = 14
+    if (match(line, /Universal/))  prio = 15
+    if (match(line, /Clipboard/))  prio = 16
+    if (match(line, /Audio controls/))  prio = 17
+    if (match(line, /Bluetooth controls/))  prio = 18
+    if (match(line, /Wifi controls/))  prio = 19
+    if (match(line, /Emoji picker/))  prio = 20
+    if (match(line, /Color picker/))  prio = 21
+    if (match(line, /Screenshot/))  prio = 22
+    if (match(line, /Screenrecording/))  prio = 23
+    if (match(line, /(Switch|Next|Former|Previous).*workspace/))  prio = 24
+    if (match(line, /Move window to workspace/))  prio = 25
+    if (match(line, /Move window silently to workspace/))  prio = 26
+    if (match(line, /Swap window/))  prio = 27
+    if (match(line, /Move window focus/))  prio = 28
+    if (match(line, /Move window$/))  prio = 29
+    if (match(line, /Resize window/))  prio = 30
+    if (match(line, /Expand window/))  prio = 31
+    if (match(line, /Shrink window/))  prio = 32
+    if (match(line, /scratchpad/))  prio = 33
+    if (match(line, /notification/))  prio = 34
+    if (match(line, /Toggle window transparency/))  prio = 35
+    if (match(line, /Toggle workspace gaps/))  prio = 36
+    if (match(line, /Toggle nightlight/))  prio = 37
+    if (match(line, /Toggle locking/))  prio = 38
     if (match(line, /group/))  prio = 94
     if (match(line, /Scroll active workspace/))  prio = 95
     if (match(line, /Cycle to/))  prio = 96

bin/omarchy-migrate

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# Run all pending migrations to bring the system in line with the installed version.
+
 # Where we store an empty file for each migration that has already been performed.
 STATE_DIR="$HOME/.local/state/omarchy/migrations"
 mkdir -p "$STATE_DIR"

bin/omarchy-notification-dismiss

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# Dismiss a mako notification on the basis of its summary. Used by the first-run notifications to dismiss them after clicking for action.
+
 if (($# == 0)); then
   echo "Usage: omarchy-notification-dismiss <summary>"
   exit 1

bin/omarchy-pkg-add

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# Add the named packages to the system if they're missing. Returns false if it couldn't be done.
+
 if omarchy-pkg-missing "$@"; then
   sudo pacman -S --noconfirm --needed "$@" || exit 1
 fi

bin/omarchy-pkg-aur-accessible

@@ -1,4 +1,7 @@
 #!/bin/bash
 
+# Returns true if the AUR is up and available.
+# Used by omarchy-update-system-pkgs to ensure the AUR is available before updating packages from it.
+
 curl -sf --connect-timeout 30 --retry 3 --retry-delay 3 -A "omarchy-update" \
   "https://aur.archlinux.org/rpc/?v=5&type=info&arg=base" >/dev/null

bin/omarchy-pkg-aur-add

@@ -0,0 +1,17 @@
+#!/bin/bash
+
+# Add the named packages to the system from the AUR if they're missing. Returns false if it couldn't be done.
+
+if omarchy-pkg-missing "$@"; then
+  yay -S --noconfirm --needed "$@" || exit 1
+fi
+
+for pkg in "$@"; do
+  # Secondary check to handle states where pacman doesn't actually register an error
+  if ! pacman -Q "$pkg" &>/dev/null; then
+    echo -e "\033[31mError: Package '$pkg' did not install\033[0m" >&2
+    exit 1
+  fi
+done
+
+exit 0

bin/omarchy-pkg-aur-install

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# Show a fuzzy-finder TUI for picking new AUR packages to install.
+
 fzf_args=(
   --multi
   --preview 'yay -Siia {1}'

bin/omarchy-pkg-drop

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# Remove all the named packages from the system if they're installed (otherwise ignore).
+
 for pkg in "$@"; do
   if pacman -Q "$pkg" &>/dev/null; then
     sudo pacman -Rns --noconfirm "$pkg"

bin/omarchy-pkg-install

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# Show a fuzzy-finder TUI for picking new Arch and OPR packages to install.
+
 fzf_args=(
   --multi
   --preview 'pacman -Sii {1}'

bin/omarchy-pkg-missing

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# Returns true if any of the named packages are missing from the system (or false if they're all there).
+
 for pkg in "$@"; do
   if ! pacman -Q "$pkg" &>/dev/null; then
     exit 0

bin/omarchy-pkg-present

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# Returns true if all of the named packages are installed on the system (or false if any of them are missing).
+
 for pkg in "$@"; do
   pacman -Q "$pkg" &>/dev/null || exit 1
 done

bin/omarchy-pkg-remove

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# Show a fuzzy-finder TUI for picking packages installed on the system to be removed.
+
 fzf_args=(
   --multi
   --preview 'yay -Qi {1}'

bin/omarchy-powerprofiles-list

@@ -1,5 +1,8 @@
 #!/bin/bash
 
+# Returns a list of all the available power profiles on the system.
+# Used by the Omarchy Menu under Setup > Power Profile.
+
 powerprofilesctl list |
   awk '/^\s*[* ]\s*[a-zA-Z0-9\-]+:$/ { gsub(/^[*[:space:]]+|:$/,""); print }' |
   tac

bin/omarchy-refresh-applications

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# Ensure all default .desktop, web apps, and TUIs are installed.
+
 # Copy and sync icon files
 mkdir -p ~/.local/share/icons/hicolor/48x48/apps/
 cp ~/.local/share/omarchy/applications/icons/*.png ~/.local/share/icons/hicolor/48x48/apps/
@@ -10,8 +12,9 @@ mkdir -p ~/.local/share/applications
 cp ~/.local/share/omarchy/applications/*.desktop ~/.local/share/applications/
 cp ~/.local/share/omarchy/applications/hidden/*.desktop ~/.local/share/applications/
 
-# Refresh the webapps
+# Refresh the webapps and TUIs
 bash $OMARCHY_PATH/install/packaging/icons.sh
 bash $OMARCHY_PATH/install/packaging/webapps.sh
+bash $OMARCHY_PATH/install/packaging/tuis.sh
 
 update-desktop-database ~/.local/share/applications

bin/omarchy-refresh-chromium

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# Refresh the ~/.config/chromium-flags.conf file from the Omarchy defaults.
+
 CONFIG_FILE="$HOME/.config/chromium-flags.conf"
 INSTALL_GOOGLE_ACCOUNTS=false
 

bin/omarchy-refresh-config

@@ -1,6 +1,8 @@
 #!/bin/bash
 
-# This script deploys ~/.local/share/omarchy/config/X/Y/Z -> ~/.config/X/Y/Z
+# Copies the named config from ~/.local/share/omarchy/config/X/Y/Z -> ~/.config/X/Y/Z.
+# If the config already exists, a backup of the existing will be taken as .bak.TIMESTAMP.
+
 config_file=$1
 
 if [[ -z "$config_file" ]]; then
@@ -9,8 +11,8 @@ if [[ -z "$config_file" ]]; then
 
   Must provide a file path from the .config directory to be refreshed.
   To copy ~/.local/share/omarchy/config/hypr/hyprlock.conf to ~/.config/hypr/hyprlock.conf
-    
-    $0 hypr/hyprlock.conf     
+
+    $0 hypr/hyprlock.conf
 USAGE
   exit 1
 fi

bin/omarchy-refresh-fastfetch

@@ -1,3 +1,5 @@
 #!/bin/bash
 
+# Overwrite the user config for fastfetch with the Omarchy default.
+
 omarchy-refresh-config fastfetch/config.jsonc

bin/omarchy-refresh-hypridle

@@ -1,4 +1,6 @@
 #!/bin/bash
 
+# Overwrite the user config for hypridle with the Omarchy default and restart the service.
+
 omarchy-refresh-config hypr/hypridle.conf
 omarchy-restart-hypridle

bin/omarchy-refresh-hyprland

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# Overwrite all the user configs in ~/.config/hypr with the Omarchy defaults.
+
 omarchy-refresh-config hypr/autostart.conf
 omarchy-refresh-config hypr/bindings.conf
 omarchy-refresh-config hypr/input.conf

bin/omarchy-refresh-hyprlock

@@ -1,3 +1,5 @@
 #!/bin/bash
 
+# Overwrite the user config for hyprlock with the Omarchy default.
+
 omarchy-refresh-config hypr/hyprlock.conf

bin/omarchy-refresh-hyprsunset

@@ -1,4 +1,6 @@
 #!/bin/bash
 
+# Overwrite the user config for hyprsunset with the Omarchy default and restart the service.
+#
 omarchy-refresh-config hypr/hyprsunset.conf
 omarchy-restart-hyprsunset

bin/omarchy-refresh-limine

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# Overwrite the user config for the Limine bootloader and rebuild it.
+
 if [[ -f /boot/EFI/Linux/omarchy_linux.efi ]] && [[ -f /boot/EFI/Linux/$(cat /etc/machine-id)_linux.efi ]]; then
   echo "Cleanup extra UKI"
   sudo rm -f /boot/EFI/Linux/$(cat /etc/machine-id)_linux.efi
@@ -8,27 +10,7 @@ echo "Resetting limine config"
 
 sudo mv /boot/limine.conf /boot/limine.conf.bak
 
-sudo tee /boot/limine.conf <<EOF >/dev/null
-### Read more at config document: https://github.com/limine-bootloader/limine/blob/trunk/CONFIG.md
-#timeout: 3
-default_entry: 2
-interface_branding: Omarchy Bootloader
-interface_branding_color: 2
-hash_mismatch_panic: no
-
-term_background: 1a1b26
-backdrop: 1a1b26
-
-# Terminal colors (Tokyo Night palette)
-term_palette: 15161e;f7768e;9ece6a;e0af68;7aa2f7;bb9af7;7dcfff;a9b1d6
-term_palette_bright: 414868;f7768e;9ece6a;e0af68;7aa2f7;bb9af7;7dcfff;c0caf5
-
-# Text colors
-term_foreground: c0caf5
-term_foreground_bright: c0caf5
-term_background_bright: 24283b
-
-EOF
+sudo cp ~/.local/share/omarchy/default/limine/limine.conf /boot/limine.conf
 
 sudo limine-update
 sudo limine-snapper-sync

bin/omarchy-refresh-pacman

@@ -1,18 +1,19 @@
 #!/bin/bash
 
+# Overwrite the package configuration for /etc/pacman with the Omarchy default of using its dedicated mirrors and repositories, then update all packages.
+# This is used after switching between Omarchy release channels to ensure the right packages for the right channel are available.
+
 # Take backup of existing files
 sudo cp -f /etc/pacman.conf /etc/pacman.conf.bak
 sudo cp -f /etc/pacman.d/mirrorlist /etc/pacman.d/mirrorlist.bak
 
-sudo cp -f ~/.local/share/omarchy/default/pacman/pacman.conf /etc/pacman.conf
-
 if [[ $1 == "edge" ]]; then
+  sudo cp -f ~/.local/share/omarchy/default/pacman/pacman-edge.conf /etc/pacman.conf
   sudo cp -f ~/.local/share/omarchy/default/pacman/mirrorlist-edge /etc/pacman.d/mirrorlist
-  sudo sed -i 's|https://pkgs.omarchy.org/.*$arch|https://pkgs.omarchy.org/edge/$arch|' /etc/pacman.conf
   echo "Setting channel to edge"
 else
+  sudo cp -f ~/.local/share/omarchy/default/pacman/pacman-stable.conf /etc/pacman.conf
   sudo cp -f ~/.local/share/omarchy/default/pacman/mirrorlist-stable /etc/pacman.d/mirrorlist
-  sudo sed -i 's|https://pkgs.omarchy.org/.*$arch|https://pkgs.omarchy.org/stable/$arch|' /etc/pacman.conf
   echo "Setting channel to stable"
 fi
 

bin/omarchy-refresh-plymouth

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# Overwrite the user config for the Plymouth drive decryption and boot sequence with the Omarchy default and rebuild it.
+
 sudo cp ~/.local/share/omarchy/default/plymouth/* /usr/share/plymouth/themes/omarchy/
 sudo plymouth-set-default-theme omarchy
 

bin/omarchy-refresh-swayosd

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# Overwrite the user configs for swayosd (controls on-screen feedback for changing volume/songs etc) with the Omarchy defaults and restart the service.
+
 omarchy-refresh-config swayosd/config.toml
 omarchy-refresh-config swayosd/style.css
 omarchy-restart-swayosd

bin/omarchy-refresh-walker

@@ -1,8 +1,10 @@
 #!/bin/bash
 
+# Overwrite the user configs for the Walker application launcher (which also powers the Omarchy Menu) and restart the services.
+
 # Ensure walker is set to autostart
 mkdir -p ~/.config/autostart/
-cp $OMARCHY_PATH/autostart/walker.desktop ~/.config/autostart/
+cp $OMARCHY_PATH/default/walker/walker.desktop ~/.config/autostart/
 systemctl --user daemon-reload
 
 omarchy-refresh-config walker/config.toml

bin/omarchy-refresh-waybar

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+# Overwrite the user configs for the Waybar menu bar with the Omarchy defaults and restart the service.
+
 omarchy-refresh-config waybar/config.jsonc
 omarchy-refresh-config waybar/style.css
 omarchy-restart-waybar

bin/omarchy-reinstall

@@ -1,33 +1,14 @@
 #!/bin/bash
-
 set -e
 
-if [ "$EUID" -eq 0 ]; then
-  echo "Error: This script should not be run as root"
-  exit 1
-fi
+# Attempt to reinstall all default Omarchy packages and reset all the default configs.
 
-echo -e "This will reinstall all the default Omarchy packages and reset all default configs.\nWarning: All changes to configs will be lost.\n"
+echo -e "This will reinstall all the default Omarchy packages and reset all default configs.\nWarning: All user changes to configs will be lost.\n"
 
 if gum confirm "Are you sure you want to reinstall and lose all config changes?"; then
-  echo "Resetting Omarchy repository"
-  git clone "https://github.com/basecamp/omarchy.git" ~/.local/share/omarchy-new >/dev/null
-  rm -rf $OMARCHY_PATH
-  mv ~/.local/share/omarchy-new $OMARCHY_PATH
+  omarchy-reinstall-git
+  omarchy-reinstall-pkgs
+  omarchy-reinstall-configs
 
-  echo "Reinstalling missing Omarchy packages"
-  mapfile -t packages < <(grep -v '^#' "$OMARCHY_PATH/install/omarchy-base.packages" | grep -v '^$')
-  sudo pacman -Syu --noconfirm --needed "${packages[@]}"
-
-  echo "Resetting all Omarchy configs"
-  cp -R ~/.local/share/omarchy/config/* ~/.config/
-  cp ~/.local/share/omarchy/default/bashrc ~/.bashrc
-  echo '[[ -f ~/.bashrc ]] && . ~/.bashrc' | tee ~/.bash_profile >/dev/null
-
-  $(bash $OMARCHY_PATH/install/config/theme.sh)
-  $(bash $OMARCHY_PATH/install/config/git.sh)
-
-  omarchy-refresh-limine
-  omarchy-refresh-plymouth
-  omarchy-nvim-setup
+  gum confirm "System has been reinstalled. Reboot?" && omarchy-cmd-reboot
 fi

bin/omarchy-reinstall-configs

@@ -0,0 +1,20 @@
+#!/bin/bash
+set -e
+
+# Overwrite all user configs with the Omarchy defaults.
+
+if [ "$EUID" -eq 0 ]; then
+  echo "Error: This script should not be run as root"
+  exit 1
+fi
+
+echo "Resetting all Omarchy configs"
+cp -R ~/.local/share/omarchy/config/* ~/.config/
+cp ~/.local/share/omarchy/default/bashrc ~/.bashrc
+echo '[[ -f ~/.bashrc ]] && . ~/.bashrc' | tee ~/.bash_profile >/dev/null
+
+$(bash $OMARCHY_PATH/install/config/theme.sh)
+
+omarchy-refresh-limine
+omarchy-refresh-plymouth
+omarchy-nvim-setup

bin/omarchy-reinstall-git

@@ -0,0 +1,8 @@
+#!/bin/bash
+set -e
+
+# Reinstall the Omarchy configuration directory from the git source.
+
+git clone "https://github.com/basecamp/omarchy.git" ~/.local/share/omarchy-new >/dev/null
+mv $OMARCHY_PATH ~/.local/share/omarchy-old
+mv ~/.local/share/omarchy-new $OMARCHY_PATH

bin/omarchy-reinstall-pkgs

@@ -0,0 +1,14 @@
+#!/bin/bash
+set -e
+
+# Reinstall all default Omarchy packages from the stable channel and downgrade any packages that are too new.
+
+# Set the package repository to the stable mirrors
+omarchy-refresh-pacman
+
+# Downgrade any packages to the stable setup
+sudo pacman -Suu --noconfirm
+
+# Ensure all packages are installed
+mapfile -t packages < <(grep -v '^#' "$OMARCHY_PATH/install/omarchy-base.packages" | grep -v '^$')
+sudo pacman -Syu --noconfirm --needed "${packages[@]}"

bin/omarchy-restart-btop

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# Reload btop configuration (used by the Omarchy theme switching).
+
+pkill -SIGUSR2 btop

bin/omarchy-restart-hyprctl

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# Reload hyprland configuration (used by the Omarchy theme switching).
+
+hyprctl reload >/dev/null

bin/omarchy-restart-mako

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# Reload mako configuration (used by the Omarchy theme switching).
+
+makoctl reload

bin/omarchy-restart-opencode

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# Reload opencode configuration (used by the Omarchy theme switching).
+
+killall -SIGUSR2 opencode

bin/omarchy-restart-terminal

@@ -4,10 +4,10 @@ if [[ -f ~/.config/alacritty/alacritty.toml ]]; then
   touch ~/.config/alacritty/alacritty.toml
 fi
 
-if pgrep -x kitty; then
-  killall -SIGUSR1 kitty
+if pgrep -x kitty >/dev/null; then
+  killall -SIGUSR1 kitty >/dev/null
 fi
 
-if pgrep -x ghostty; then
+if pgrep -x ghostty >/dev/null; then
   killall -SIGUSR2 ghostty
 fi

bin/omarchy-setup-fingerprint

@@ -20,7 +20,11 @@ print_info() {
 }
 
 check_fingerprint_hardware() {
-  if ! lsusb | grep -Eiq 'fingerprint|synaptics|goodix|elan|validity|FPC'; then
+  # Get fingerprint devices for the user
+  devices=$(fprintd-list "$USER" 2>/dev/null)
+
+  # Exit if no devices found
+  if [[ -z "$devices" ]]; then
     print_error "\nNo fingerprint sensor detected."
     return 1
   fi

bin/omarchy-theme-set

@@ -47,17 +47,15 @@ if pgrep -x waybar >/dev/null; then
 fi
 omarchy-restart-swayosd
 omarchy-restart-terminal
-hyprctl reload
-pkill -SIGUSR2 btop
-# pkill -SIGUSR2 opencode
-makoctl reload
+omarchy-restart-hyprctl
+omarchy-restart-btop
+omarchy-restart-opencode
+omarchy-restart-mako
 
 # Change app-specific themes
 omarchy-theme-set-gnome
 omarchy-theme-set-browser
 omarchy-theme-set-vscode
-omarchy-theme-set-vscodium
-omarchy-theme-set-cursor
 omarchy-theme-set-obsidian
 
 # Call hook on theme set

bin/omarchy-theme-set-browser

@@ -14,17 +14,17 @@ if omarchy-cmd-present chromium || omarchy-cmd-present helium-browser || omarchy
 
   if omarchy-cmd-present chromium; then
     rm -f /etc/chromium/policies/managed/color.json
-    chromium --no-startup-window --set-theme-color="$THEME_RGB_COLOR"
+    chromium --no-startup-window --set-theme-color="$THEME_RGB_COLOR" >/dev/null
 
     if [[ -f ~/.config/omarchy/current/theme/light.mode ]]; then
-      chromium --no-startup-window --set-color-scheme="light"
+      chromium --no-startup-window --set-color-scheme="light" >/dev/null
     else
-      chromium --no-startup-window --set-color-scheme="dark"
+      chromium --no-startup-window --set-color-scheme="dark" >/dev/null
     fi
   fi
 
   if omarchy-cmd-present brave; then
     echo "{\"BrowserThemeColor\": \"$THEME_HEX_COLOR\"}" | tee "/etc/brave/policies/managed/color.json" >/dev/null
-    brave --refresh-platform-policy --no-startup-window
+    brave --refresh-platform-policy --no-startup-window >/dev/null
   fi
 fi

bin/omarchy-theme-set-cursor

@@ -1,4 +0,0 @@
-#!/bin/bash
-
-# Call the VSCode theme setter with Cursor-specific parameters
-omarchy-theme-set-vscode cursor "$HOME/.config/Cursor/User/settings.json" "$HOME/.local/state/omarchy/toggles/skip-cursor-theme-changes"

bin/omarchy-theme-set-obsidian

@@ -1,52 +1,18 @@
 #!/bin/bash
 
-# omarchy-theme-set-obsidian: Bootstrap and update Omarchy theme for Obsidian
-#
-# - Ensures registry at ~/.local/state/omarchy/obsidian-vaults
-#   - Populates by extracting vault paths from ~/.config/obsidian/obsidian.json
-# - For each valid vault:
-#   - Ensures .obsidian/themes/Omarchy/{manifest.json, theme.css}
-#   - Updates theme.css (uses current theme’s obsidian.css if present; otherwise generates -- see below)
+# Sync Omarchy theme to all Obsidian vaults
 
-# Theme automagic generation logic:
-#
-# - Background/foreground: read from ~/.config/omarchy/current/theme/alacritty.toml [colors.primary]
-#   (background/foreground). Fallbacks: bg=#1a1b26, fg=#a9b1d6. Compute bg brightness for light/dark handling.
-# - Palette extraction: collect colors from Alacritty (primary/normal/bright/dim/selection), Waybar (@define-color),
-#   and Hyprland (col.*_border; rgba->hex). Normalize, dedupe, and count frequencies.
-# - Slot ordering: remove bg/fg, sort remaining colors by frequency, then fill 13 slots by cycling. Map slots to:
-#   h1–h6, links, inline code, marks, interactive accent, blockquote border; muted/faint use border color.
-# - Code colors: code background = closest color to bg (Euclidean RGB); if none, make a subtle bg variant (+/− RGB).
-#   code foreground = closest color to fg; fallback #e0e0e0.
-# - Border color: from btop.theme theme[div_line]; else blended mix biased toward bg (≈ (bg+fg)/3).
-# - Selection: from Alacritty [colors.selection] (background/text), honoring CellForeground/Background.
-#   If missing, background = 75% bg + 25% fg; text chosen for contrast vs selection background.
-# - Fonts: monospace from Alacritty [font] or fontconfig monospace; UI font from fontconfig sans-serif.
-
-VAULTS_FILE="$HOME/.local/state/omarchy/obsidian-vaults"
 CURRENT_THEME_DIR="$HOME/.config/omarchy/current/theme"
 
-ensure_vaults_file() {
-  mkdir -p "$(dirname "$VAULTS_FILE")"
-  local tmpfile
-  tmpfile="$(mktemp)"
-  # Extract the Obsidian vault location from config file <base>/<vault>/.obsidian
-  jq -r '.vaults | values[].path' ~/.config/obsidian/obsidian.json 2>/dev/null >>"$tmpfile"
-    if [ -s "$tmpfile" ]; then
-      sort -u "$tmpfile" >"$VAULTS_FILE"
-    else
-      : >"$VAULTS_FILE"
-    fi
-    rm "$tmpfile"
-}
+[ -f "$CURRENT_THEME_DIR/obsidian.css" ] || exit 0
 
-# Ensure theme directory and minimal manifest exist in a vault
-ensure_theme_scaffold() {
-  local vault_path="$1"
-  local theme_dir="$vault_path/.obsidian/themes/Omarchy"
+jq -r '.vaults | values[].path' ~/.config/obsidian/obsidian.json 2>/dev/null | while read -r vault_path; do
+  [ -d "$vault_path/.obsidian" ] || continue
+
+  theme_dir="$vault_path/.obsidian/themes/Omarchy"
   mkdir -p "$theme_dir"
-  if [ ! -f "$theme_dir/manifest.json" ]; then
-    cat >"$theme_dir/manifest.json" <<'EOF'
+
+  [ -f "$theme_dir/manifest.json" ] || cat >"$theme_dir/manifest.json" <<'EOF'
 {
   "name": "Omarchy",
   "version": "1.0.0",
@@ -56,629 +22,6 @@ ensure_theme_scaffold() {
   "authorUrl": "https://omarchy.org"
 }
 EOF
-  fi
-  [ -f "$theme_dir/theme.css" ] || : >"$theme_dir/theme.css"
-}
 
-# Function to extract hex color from string
-extract_hex_color() {
-  echo "$1" | grep -oE '#[0-9a-fA-F]{6}' | head -1
-}
-
-# Function to convert RGB/RGBA to hex
-rgb_to_hex() {
-  local rgb_string="$1"
-  if [[ $rgb_string =~ rgba?\(([0-9]+),\s*([0-9]+),\s*([0-9]+) ]]; then
-    printf "#%02x%02x%02x\n" "${BASH_REMATCH[1]}" "${BASH_REMATCH[2]}" "${BASH_REMATCH[3]}"
-  fi
-}
-
-# Convert hex to RGB components
-hex_to_rgb() {
-  local hex="${1#\#}"
-  printf "%d %d %d\n" "0x${hex:0:2}" "0x${hex:2:2}" "0x${hex:4:2}"
-}
-
-# Calculate perceived brightness (0-255)
-calculate_brightness() {
-  local hex="$1"
-  read -r r g b <<<"$(hex_to_rgb "$hex")"
-  # Use perceived brightness formula
-  echo $(((r * 299 + g * 587 + b * 114) / 1000))
-}
-
-# Calculate approximate contrast ratio between two colors
-# Returns ratio scaled by 100 (e.g., 450 = 4.5:1 ratio)
-# (this is due to bash not supporting decimal math)
-calculate_contrast_ratio() {
-  local hex1="$1" hex2="$2"
-  local br1=$(calculate_brightness "$hex1")  # 0-255 range
-  local br2=$(calculate_brightness "$hex2")  # 0-255 range
-
-  # Ensure br1 is the lighter color (higher brightness)
-  if [ $br1 -lt $br2 ]; then
-    local temp=$br1
-    br1=$br2
-    br2=$temp
-  fi
-
-  # Approximate contrast ratio scaled by 100
-  # Add offset to avoid division by zero and approximate WCAG +0.05 behavior
-  echo $(((br1 + 13) * 100 / (br2 + 13)))
-}
-
-# Check if two colors meet minimum contrast threshold
-# Usage: meets_contrast_threshold <ratio> <threshold>
-# Both ratio and threshold should be scaled by 100 (e.g., 300 = 3:1)
-meets_contrast_threshold() {
-  local ratio="$1"        # Ratio scaled by 100 (from calculate_contrast_ratio)
-  local threshold="$2"    # Threshold scaled by 100 (300=3:1, 450=4.5:1, 700=7:1)
-  [ $ratio -ge $threshold ]
-}
-
-# Calculate color distance (euclidean in RGB space)
-color_distance() {
-  local hex1="$1"
-  local hex2="$2"
-  read -r r1 g1 b1 <<<"$(hex_to_rgb "$hex1")"
-  read -r r2 g2 b2 <<<"$(hex_to_rgb "$hex2")"
-  echo $(((r1 - r2) * (r1 - r2) + (g1 - g2) * (g1 - g2) + (b1 - b2) * (b1 - b2)))
-}
-
-# Extract all colors with frequency count
-extract_all_colors_with_count() {
-  local -A color_counts
-  local color
-
-  # Extract from Alacritty config
-  if [ -f "$CURRENT_THEME_DIR/alacritty.toml" ]; then
-    # Primary colors
-    while IFS= read -r color; do
-      color=$(echo "$color" | tr '[:upper:]' '[:lower:]') # Lowercase for consistency
-      [ -n "$color" ] && ((color_counts["$color"]++))
-    done < <(grep -E "(background|foreground|cursor|text)" "$CURRENT_THEME_DIR/alacritty.toml" | sed "s/.*[\"']0x/#/;s/.*[\"']#/#/;s/[\"'].*//;s/.*#\([0-9a-fA-F]\{6\}\).*/\#\1/" | grep "^#")
-
-    # Normal colors
-    while IFS= read -r color; do
-      color=$(echo "$color" | tr '[:upper:]' '[:lower:]') # Lowercase for consistency
-      [ -n "$color" ] && ((color_counts["$color"]++))
-    done < <(grep -A 20 "\[colors.normal\]" "$CURRENT_THEME_DIR/alacritty.toml" | grep -E "(black|red|green|yellow|blue|magenta|cyan|white)" | sed "s/.*[\"']0x/#/;s/.*[\"']#/#/;s/[\"'].*//;s/.*#\([0-9a-fA-F]\{6\}\).*/\#\1/" | grep "^#")
-
-    # Bright colors
-    while IFS= read -r color; do
-      # Add # if missing
-      [[ "$color" =~ ^[0-9a-fA-F]{6}$ ]] && color="#$color"
-      color=$(echo "$color" | tr '[:upper:]' '[:lower:]') # Lowercase for consistency
-      [[ "$color" =~ ^#[0-9a-f]{6}$ ]] && ((color_counts["$color"]++))
-    done < <(grep -A 20 "\[colors.bright\]" "$CURRENT_THEME_DIR/alacritty.toml" | grep -E "(black|red|green|yellow|blue|magenta|cyan|white)" | sed "s/.*[\"']//;s/[\"'].*//")
-
-    # Dim colors if present
-    while IFS= read -r color; do
-      # Add # if missing
-      [[ "$color" =~ ^[0-9a-fA-F]{6}$ ]] && color="#$color"
-      color=$(echo "$color" | tr '[:upper:]' '[:lower:]') # Lowercase for consistency
-      [[ "$color" =~ ^#[0-9a-f]{6}$ ]] && ((color_counts["$color"]++))
-    done < <(grep -A 20 "\[colors.dim\]" "$CURRENT_THEME_DIR/alacritty.toml" 2>/dev/null | grep -E "(black|red|green|yellow|blue|magenta|cyan|white)" | sed "s/.*[\"']//;s/[\"'].*//")
-
-    # Selection colors
-    while IFS= read -r color; do
-      color=$(echo "$color" | tr '[:upper:]' '[:lower:]') # Lowercase for consistency
-      [ -n "$color" ] && ((color_counts["$color"]++))
-    done < <(grep -A 5 "\[colors.selection\]" "$CURRENT_THEME_DIR/alacritty.toml" 2>/dev/null | grep -E "(background|text)" | sed "s/.*[\"']0x/#/;s/.*[\"']#/#/;s/[\"'].*//;s/.*#\([0-9a-fA-F]\{6\}\).*/\#\1/" | grep "^#")
-  fi
-
-  # Extract from Waybar CSS
-  if [ -f "$CURRENT_THEME_DIR/waybar.css" ]; then
-    while IFS= read -r color; do
-      color=$(echo "$color" | tr '[:upper:]' '[:lower:]') # Lowercase for consistency
-      [ -n "$color" ] && ((color_counts["$color"]++))
-    done < <(grep -oE '@define-color [a-z_-]+ #[0-9a-fA-F]{6}' "$CURRENT_THEME_DIR/waybar.css" | grep -oE '#[0-9a-fA-F]{6}')
-  fi
-
-  # Extract from Hyprland config
-  if [ -f "$CURRENT_THEME_DIR/hyprland.conf" ]; then
-    while IFS= read -r color; do
-      if [[ $color == rgba* ]] || [[ $color == rgb* ]]; then
-        color=$(rgb_to_hex "$color")
-      fi
-      color=$(echo "$color" | tr '[:upper:]' '[:lower:]') # Lowercase for consistency
-      [ -n "$color" ] && ((color_counts["$color"]++))
-    done < <(grep -E "col\.(active|inactive)_border" "$CURRENT_THEME_DIR/hyprland.conf" | grep -oE 'rgba?\([^)]+\)|#[0-9a-fA-F]{6,8}' | sed 's/ff$//')
-  fi
-
-  # Output colors with their counts
-  for color in "${!color_counts[@]}"; do
-    echo "${color_counts[$color]} $color"
-  done
-}
-
-# Sort colors by frequency
-sort_colors_by_frequency() {
-  # Input is already "count color" format
-  sort -rn | cut -d' ' -f2
-}
-
-# Fill color slots with cycling if needed
-fill_color_slots() {
-  local -a colors=("$@")
-  local -a slots
-  local num_colors=${#colors[@]}
-
-  # Need 13 slots total (code colors are handled separately)
-  local slots_needed=13
-
-  if [ $num_colors -eq 0 ]; then
-    # No colors available, use defaults
-    colors=("#3d3d3d" "#5d5d5d" "#7d7d7d" "#9d9d9d" "#bd93f9" "#50fa7b")
-    num_colors=6
-  fi
-
-  # Fill slots, cycling if necessary
-  for ((i = 0; i < slots_needed; i++)); do
-    slots[$i]="${colors[$((i % num_colors))]}"
-  done
-
-  echo "${slots[@]}"
-}
-
-# Main color extraction and theme generation
-extract_theme_data() {
-  # Get primary colors from Alacritty
-  local bg_color="#1a1b26"
-  local fg_color="#a9b1d6"
-
-  if [ -f "$CURRENT_THEME_DIR/alacritty.toml" ]; then
-    local extracted_bg=$(grep -A 5 "\[colors.primary\]" "$CURRENT_THEME_DIR/alacritty.toml" | grep "^background = " | sed "s/.*[\"']0x/#/;s/.*[\"']#/#/;s/[\"'].*//;s/.*#\([0-9a-fA-F]\{6\}\).*/\#\1/" | head -1 | tr '[:upper:]' '[:lower:]')
-    local extracted_fg=$(grep -A 5 "\[colors.primary\]" "$CURRENT_THEME_DIR/alacritty.toml" | grep "^foreground = " | sed "s/.*[\"']0x/#/;s/.*[\"']#/#/;s/[\"'].*//;s/.*#\([0-9a-fA-F]\{6\}\).*/\#\1/" | head -1 | tr '[:upper:]' '[:lower:]')
-    [ -n "$extracted_bg" ] && bg_color="$extracted_bg"
-    [ -n "$extracted_fg" ] && fg_color="$extracted_fg"
-  fi
-
-  # Determine if light or dark theme
-  local bg_brightness=$(calculate_brightness "$bg_color")
-  local is_light_theme=false
-  [ $bg_brightness -gt 127 ] && is_light_theme=true
-
-  # Extract all colors with counts
-  local color_data=$(extract_all_colors_with_count)
-
-  # Filter out background and foreground colors for the main array
-  local filtered_data=$(echo "$color_data" | grep -v "$bg_color" | grep -v "$fg_color")
-
-  # Get all unique colors (including bg/fg) for distance calculations
-  local -a all_unique_colors
-  readarray -t all_unique_colors < <(echo "$color_data" | cut -d' ' -f2 | sort -u)
-
-  # Find the 3 closest colors to background for background variations
-  local -a bg_distances
-  for color in "${all_unique_colors[@]}"; do
-    if [ "$color" != "$bg_color" ]; then
-      distance=$(color_distance "$color" "$bg_color")
-      bg_distances+=("$distance:$color")
-    fi
-  done
-
-  # All background variations use the same as primary background
-  local bg_primary_alt="$bg_color"
-  local bg_secondary="$bg_color"
-  local bg_secondary_alt="$bg_color"
-
-  # Generate code background color that will contrast with foreground text
-  read -r r g b <<<"$(hex_to_rgb "$bg_color")"
-  if [ $bg_brightness -gt 127 ]; then
-    r=$((r - 10))
-    g=$((g - 10))
-    b=$((b - 10))
-  else
-    r=$((r + 15))
-    g=$((g + 15))
-    b=$((b + 15))
-  fi
-  [ $r -lt 0 ] && r=0
-  [ $r -gt 255 ] && r=255
-  [ $g -lt 0 ] && g=0
-  [ $g -gt 255 ] && g=255
-  [ $b -lt 0 ] && b=0
-  [ $b -gt 255 ] && b=255
-  code_bg=$(printf "#%02x%02x%02x" "$r" "$g" "$b")
-
-
-  # Find closest color to foreground for code block text
-  local code_fg=""
-  min_distance=999999999
-  for color in "${all_unique_colors[@]}"; do
-    if [ "$color" != "$fg_color" ]; then
-      distance=$(color_distance "$color" "$fg_color")
-      if [ $distance -lt $min_distance ]; then
-        min_distance=$distance
-        code_fg="$color"
-      fi
-    fi
-  done
-  [ -z "$code_fg" ] && code_fg="#e0e0e0" # Fallback
-
-  # Extract text selection colors from Alacritty
-  local selection_bg=""
-  local selection_fg=""
-  if [ -f "$CURRENT_THEME_DIR/alacritty.toml" ]; then
-    selection_bg=$(grep -A 5 "\[colors.selection\]" "$CURRENT_THEME_DIR/alacritty.toml" | grep "^background = " | sed "s/.*[\"']0x/#/;s/.*[\"']#/#/;s/[\"'].*//;s/.*#\([0-9a-fA-F]\{6\}\).*/\#\1/" | head -1 | tr '[:upper:]' '[:lower:]')
-    local selection_text=$(grep -A 5 "\[colors.selection\]" "$CURRENT_THEME_DIR/alacritty.toml" | grep "^text = " | sed "s/.*[\"']0x/#/;s/.*[\"']#/#/;s/[\"'].*//;s/.*#\([0-9a-fA-F]\{6\}\).*/\#\1/" | head -1 | tr '[:upper:]' '[:lower:]')
-
-    # If text is set to CellForeground/CellBackground, use the appropriate color
-    if [ -z "$selection_text" ] || [[ "$(grep -A 5 "\[colors.selection\]" "$CURRENT_THEME_DIR/alacritty.toml" | grep "^text = ")" == *"CellForeground"* ]]; then
-      selection_fg="$fg_color"
-    elif [[ "$(grep -A 5 "\[colors.selection\]" "$CURRENT_THEME_DIR/alacritty.toml" | grep "^text = ")" == *"CellBackground"* ]]; then
-      selection_fg="$bg_color"
-    else
-      selection_fg="$selection_text"
-    fi
-  fi
-
-  # Fallback if no selection colors found
-  if [ -z "$selection_bg" ]; then
-    read -r r1 g1 b1 <<<"$(hex_to_rgb "$bg_color")"
-    read -r r2 g2 b2 <<<"$(hex_to_rgb "$fg_color")"
-    local r=$(((r1 * 3 + r2) / 4)) # 75% background, 25% foreground
-    local g=$(((g1 * 3 + g2) / 4))
-    local b=$(((b1 * 3 + b2) / 4))
-    selection_bg=$(printf "#%02x%02x%02x" "$r" "$g" "$b")
-  fi
-
-  # Use contrasting color for selection text if not defined
-  if [ -z "$selection_fg" ]; then
-    # Calculate brightness of selection background
-    local sel_brightness=$(calculate_brightness "$selection_bg")
-    if [ $sel_brightness -gt 127 ]; then
-      selection_fg="$bg_color" # Dark text on light selection
-    else
-      selection_fg="$fg_color" # Light text on dark selection
-    fi
-  fi
-
-  # Extract border color from btop theme
-  local border_color=""
-  if [ -f "$CURRENT_THEME_DIR/btop.theme" ]; then
-    # Look for theme[div_line] in btop theme
-    local btop_divline=$(grep 'theme\[div_line\]' "$CURRENT_THEME_DIR/btop.theme" | head -1)
-
-    if [ -n "$btop_divline" ]; then
-      # Extract the color value after the = sign
-      local extracted=$(echo "$btop_divline" | sed 's/.*=//' | xargs)
-
-      # Check if it's a hex color and lowercase it
-      if [[ $extracted =~ ^#[0-9a-fA-F]{6}$ ]]; then
-        border_color=$(echo "$extracted" | tr '[:upper:]' '[:lower:]')
-      elif [[ $extracted =~ ^[0-9a-fA-F]{6}$ ]]; then
-        # Add # if missing and lowercase
-        border_color=$(echo "#$extracted" | tr '[:upper:]' '[:lower:]')
-      fi
-    fi
-  fi
-
-  # Fallback if no border color found
-  if [ -z "$border_color" ]; then
-    # Use a color between bg and fg
-    read -r r1 g1 b1 <<<"$(hex_to_rgb "$bg_color")"
-    read -r r2 g2 b2 <<<"$(hex_to_rgb "$fg_color")"
-    local r=$(((r1 + r2) / 3)) # Closer to background
-    local g=$(((g1 + g2) / 3))
-    local b=$(((b1 + b2) / 3))
-    border_color=$(printf "#%02x%02x%02x" "$r" "$g" "$b")
-  fi
-
-  # Set text colors for muted/faint based on contrast
-  local text_muted_color="$border_color"
-  local text_faint_color="$border_color"
-
-  # Validate border color contrast against background
-
-  # Represents a 3:1 WCAG contrast ratio
-  local ideal_contrast_ratio=300
-
-  local border_contrast=$(calculate_contrast_ratio "$border_color" "$bg_color")
-  if ! meets_contrast_threshold "$border_contrast" "$ideal_contrast_ratio"; then
-    # Override text colors for readability, keep border color for visibility
-    text_muted_color="$fg_color"
-    text_faint_color="$fg_color"
-  fi
-
-  # Get unique colors array (without bg/fg) sorted by frequency
-  local -a unique_colors
-  readarray -t unique_colors < <(echo "$filtered_data" | sort_colors_by_frequency)
-
-  # Fill the 13 color slots (code colors handled separately)
-  local -a color_slots
-  readarray -t color_slots < <(fill_color_slots "${unique_colors[@]}" | tr ' ' '\n')
-
-  # Extract fonts
-  local monospace_font="JetBrainsMono Nerd Font"
-  local ui_font="Liberation Sans"
-
-  if [ -f "$CURRENT_THEME_DIR/alacritty.toml" ]; then
-    local alacritty_font=$(grep -A 5 "\[font\]" "$CURRENT_THEME_DIR/alacritty.toml" | grep 'family = ' | head -1 | cut -d'"' -f2)
-    [ -n "$alacritty_font" ] && monospace_font="$alacritty_font"
-  fi
-
-  if [ -f "$HOME/.config/fontconfig/fonts.conf" ]; then
-    local fontconfig_mono=$(xmlstarlet sel -t -v '//match[@target="pattern"][test/string="monospace"]/edit[@name="family"]/string' "$HOME/.config/fontconfig/fonts.conf" 2>/dev/null || true)
-    [ -n "$fontconfig_mono" ] && monospace_font="$fontconfig_mono"
-
-    local fontconfig_sans=$(xmlstarlet sel -t -v '//match[@target="pattern"][test/string="sans-serif"]/edit[@name="family"]/string' "$HOME/.config/fontconfig/fonts.conf" 2>/dev/null || true)
-    [ -n "$fontconfig_sans" ] && ui_font="$fontconfig_sans"
-  fi
-
-  # Generate CSS with 14-slot system
-  cat <<EOF
-/* Omarchy Theme for Obsidian */
-/* Generated on $(date) from theme: $(basename "$(readlink "$CURRENT_THEME_DIR" 2>/dev/null || echo "unknown")") */
-/* Colors sorted by frequency, backgrounds by distance */
-
-.theme-dark, .theme-light {
-  /* Core colors */
-  --background-primary: $bg_color;
-  --text-normal: $fg_color;
-
-  /* Background variations (always distance-based) */
-  --background-primary-alt: $bg_primary_alt;
-  --background-secondary: $bg_secondary;
-  --background-secondary-alt: $bg_secondary_alt;
-
-  /* Code block colors (always distance-based) */
-  --code-background: $code_bg;
-  --code-foreground: $code_fg;
-
-  /* Border color from btop theme */
-  --border-color: $border_color;
-
-  /* Selection colors from Alacritty */
-  --text-selection: $selection_bg;
-  --text-selection-fg: $selection_fg;
-
-  /* 13-slot color system for remaining elements */
-  --text-title-h1: ${color_slots[0]};
-  --text-title-h2: ${color_slots[1]};
-  --text-title-h3: ${color_slots[2]};
-  --text-title-h4: ${color_slots[3]};
-  --text-title-h5: ${color_slots[4]};
-  --text-title-h6: ${color_slots[4]};  /* Same as h5 */
-  --text-link: ${color_slots[5]};
-  --markup-code: ${color_slots[6]};
-  --text-mark: ${color_slots[7]};
-  --interactive-accent: ${color_slots[8]};
-  --blockquote-border: ${color_slots[9]};
-  --text-muted: $text_muted_color;  /* Use text-specific color for muted text */
-  --text-faint: $text_faint_color;  /* Use text-specific color for faint text */
-
-  /* Additional mappings */
-  --text-accent: var(--interactive-accent);
-  --text-accent-hover: var(--interactive-accent);
-  --text-error: var(--text-title-h1);
-  --text-error-hover: var(--text-title-h1);
-  --text-highlight-bg: $fg_color;  /* Use text color as highlight background */
-  --text-on-accent: $bg_color;
-
-  --interactive-normal: var(--code-background);
-  --interactive-hover: var(--interactive-accent);
-  --interactive-accent-hover: var(--interactive-accent);
-  --interactive-success: var(--text-title-h2);
-
-  --scrollbar-bg: var(--background-primary);
-  --scrollbar-thumb-bg: var(--code-background);
-  --scrollbar-active-thumb-bg: var(--interactive-accent);
-
-  --background-modifier-border: var(--border-color);
-  --background-modifier-form-field: var(--code-background);
-  --background-modifier-form-field-highlighted: var(--code-background);
-  --background-modifier-box-shadow: rgba(0, 0, 0, 0.3);
-  --background-modifier-success: var(--interactive-success);
-  --background-modifier-error: var(--text-error);
-  --background-modifier-error-hover: var(--text-error);
-  --background-modifier-cover: rgba(0, 0, 0, 0.8);
-
-  --link-color: var(--text-link);
-  --link-color-hover: var(--text-link);
-  --link-unresolved-color: var(--text-muted);
-  --link-unresolved-opacity: 0.7;
-
-  --tag-color: var(--text-title-h3);
-  --tag-background: var(--code-background);
-
-  --graph-line: var(--text-muted);
-  --graph-node: var(--interactive-accent);
-  --graph-node-unresolved: var(--text-muted);
-  --graph-node-focused: var(--text-link);
-  --graph-node-tag: var(--text-title-h3);
-  --graph-node-attachment: var(--text-title-h2);
-
-  /* Fonts */
-  --font-interface-theme: "$ui_font";
-  --font-text-theme: "$ui_font";
-  --font-monospace-theme: "$monospace_font";
-}
-
-/* Headers */
-.cm-header-1, .markdown-rendered h1 { color: var(--text-title-h1); }
-.cm-header-2, .markdown-rendered h2 { color: var(--text-title-h2); }
-.cm-header-3, .markdown-rendered h3 { color: var(--text-title-h3); }
-.cm-header-4, .markdown-rendered h4 { color: var(--text-title-h4); }
-.cm-header-5, .markdown-rendered h5 { color: var(--text-title-h5); }
-.cm-header-6, .markdown-rendered h6 { color: var(--text-title-h6); }
-
-/* Code blocks */
-.markdown-rendered code {
-  font-family: var(--font-monospace-theme);
-  background-color: var(--code-background);
-  color: var(--markup-code);
-  padding: 2px 4px;
-  border-radius: 3px;
-}
-
-.markdown-rendered pre {
-  background-color: var(--code-background);
-  border: 1px solid var(--background-modifier-border);
-  border-radius: 5px;
-}
-
-.markdown-rendered pre code {
-  background-color: transparent;
-  color: var(--code-foreground);
-}
-
-/* Syntax highlighting */
-.cm-s-obsidian span.cm-keyword { color: var(--text-title-h1); }
-.cm-s-obsidian span.cm-string { color: var(--text-title-h2); }
-.cm-s-obsidian span.cm-number { color: var(--text-title-h3); }
-.cm-s-obsidian span.cm-comment { color: var(--text-muted); }
-.cm-s-obsidian span.cm-operator { color: var(--text-link); }
-.cm-s-obsidian span.cm-variable { color: var(--text-normal); }
-.cm-s-obsidian span.cm-def { color: var(--text-link); }
-
-/* Highlighted text */
-.markdown-rendered mark,
-.cm-s-obsidian span.cm-highlight,
-mark {
-  background-color: var(--text-highlight-bg) !important;
-  color: var(--code-background) !important;
-}
-
-/* Links */
-.markdown-rendered a {
-  color: var(--text-link);
-}
-
-/* Blockquotes */
-.markdown-rendered blockquote {
-  border-left: 4px solid var(--blockquote-border);
-  padding-left: 1em;
-}
-
-/* Status bar */
-.status-bar {
-  background-color: var(--code-background);
-  border-top: 1px solid var(--background-modifier-border);
-}
-
-/* Active file */
-.workspace-leaf.mod-active .workspace-leaf-header-title {
-  color: var(--interactive-accent);
-}
-
-.nav-file-title.is-active {
-  background-color: var(--code-background);
-  color: var(--interactive-accent);
-}
-
-/* Text selection */
-::selection {
-  background-color: var(--text-selection);
-  color: var(--text-selection-fg);
-}
-
-/* Search results */
-.search-result-file-title {
-  color: var(--interactive-accent);
-}
-
-.search-result-file-match {
-  background-color: var(--code-background);
-  color: var(--text-normal);
-  border-left: 3px solid var(--interactive-accent);
-}
-
-.search-result-file-matched-text {
-  color: var(--code-background);
-}
-
-/* Tables */
-.markdown-rendered table {
-  border: 1px solid var(--background-modifier-border);
-}
-
-.markdown-rendered th {
-  background-color: var(--code-background);
-  color: var(--text-accent);
-}
-
-.markdown-rendered td {
-  border: 1px solid var(--background-modifier-border);
-}
-
-/* Callouts */
-.callout {
-  border-left: 4px solid var(--interactive-accent);
-  background-color: var(--code-background);
-}
-.callout * {
-  color: var(--text-normal);
-}
-
-/* Modal dialogs */
-.modal {
-  background-color: var(--background-primary);
-  border: 2px solid var(--background-modifier-border);
-}
-
-/* Settings */
-.vertical-tab-header-group-title {
-  color: var(--interactive-accent);
-}
-
-.vertical-tab-nav-item.is-active {
-  background-color: var(--code-background);
-  color: var(--interactive-accent);
-}
-EOF
-}
-
-# Option handling
-if [ "${1:-}" = "--reset" ]; then
-  echo "♻️  Resetting Omarchy themes and registry..."
-  if [ -f "$VAULTS_FILE" ] && [ -s "$VAULTS_FILE" ]; then
-    while IFS= read -r vault_path || [ -n "$vault_path" ]; do
-      case "$vault_path" in ""|\#*) continue ;; esac
-      vault_path="${vault_path%/}"
-      vault_name=$(basename "$vault_path")
-      theme_dir="$vault_path/.obsidian/themes/Omarchy"
-      if [ -d "$theme_dir" ]; then
-        rm -rf "$theme_dir"
-        echo "   ✅ $vault_name (theme removed)"
-      else
-        echo "   ℹ️  $vault_name (no theme present)"
-      fi
-    done <"$VAULTS_FILE"
-  fi
-  rm -f "$VAULTS_FILE"
-  echo "✅ Registry removed"
-  exit 0
-fi
-
-# Main update logic
-echo "🔄 Updating Obsidian vaults..."
-
-# Step 1: ensure registry exists (bootstrap if needed)
-ensure_vaults_file
-
-while IFS= read -r vault_path || [ -n "$vault_path" ]; do
-  case "$vault_path" in "" | \#*) continue ;; esac
-  vault_path="${vault_path%/}"
-  vault_name=$(basename "$vault_path")
-
-  # Step 2: verify path exists; log/skip gracefully if invalid
-  if [ ! -d "$vault_path" ] || [ ! -d "$vault_path/.obsidian" ]; then
-    echo "   ❌ $vault_name (invalid entry: missing directory or .obsidian)"
-    continue
-  fi
-
-  # Ensure theme files exist for this vault
-  ensure_theme_scaffold "$vault_path"
-  THEME_DIR="$vault_path/.obsidian/themes/Omarchy"
-
-  # Step 3: update theme.css
-  if [ -f "$CURRENT_THEME_DIR/obsidian.css" ]; then
-    cp "$CURRENT_THEME_DIR/obsidian.css" "$THEME_DIR/theme.css"
-    echo "   ✅ $vault_name (custom theme)"
-  else
-    extract_theme_data >"$THEME_DIR/theme.css"
-    echo "   ✅ $vault_name (generated theme)"
-  fi
-done <"$VAULTS_FILE"
+  cp "$CURRENT_THEME_DIR/obsidian.css" "$theme_dir/theme.css"
+done

bin/omarchy-theme-set-templates

@@ -1,6 +1,7 @@
 #!/bin/bash
 
 TEMPLATES_DIR="$OMARCHY_PATH/default/themed"
+USER_TEMPLATES_DIR="$HOME/.config/omarchy/themed"
 NEXT_THEME_DIR="$HOME/.config/omarchy/current/next-theme"
 COLORS_FILE="$NEXT_THEME_DIR/colors.toml"
 
@@ -12,31 +13,32 @@ hex_to_rgb() {
 
 # Only generate dynamic templates for themes with a colors.toml definition
 if [[ -f $COLORS_FILE ]]; then
-  # Parse TOML using yq (treating it as YAML since the flat key=value structure is compatible)
-  # We convert 'key = value' to 'key: value' to make it valid YAML, then use yq/jq to generate the replacement commands.
   sed_script=$(mktemp)
 
-  # Generate standard and _strip substitutions
-  sed 's/=/:/' "$COLORS_FILE" | yq -r 'to_entries[] | "s|{{ \(.key) }}|\(.value)|g", "s|{{ \(.key)_strip }}|\(.value | sub("^#";""))|g"' > "$sed_script"
-
-  # Generate _rgb substitutions for hex colors
   while IFS='=' read -r key value; do
-    key=$(echo "$key" | xargs)
-    value=$(echo "$value" | xargs | tr -d '"')
+    key="${key//[\"\' ]/}"                # strip quotes and spaces from key
+    [[ $key && $key != \#* ]] || continue # skip empty lines and comments
+    value="${value#*[\"\']}"
+    value="${value%%[\"\']*}" # extract value between quotes (ignores inline comments)
+
+    printf 's|{{ %s }}|%s|g\n' "$key" "$value"            # {{ key }} -> value
+    printf 's|{{ %s_strip }}|%s|g\n' "$key" "${value#\#}" # {{ key_strip }} -> value without leading #
     if [[ $value =~ ^# ]]; then
       rgb=$(hex_to_rgb "$value")
-      echo "s|{{ ${key}_rgb }}|${rgb}|g" >> "$sed_script"
+      echo "s|{{ ${key}_rgb }}|${rgb}|g"
     fi
-  done < "$COLORS_FILE"
+  done <"$COLORS_FILE" >"$sed_script"
 
   shopt -s nullglob
-  for tpl in "$TEMPLATES_DIR"/*.tpl; do
+
+  # Process user templates first, then built-in templates (user overrides built-in)
+  for tpl in "$USER_TEMPLATES_DIR"/*.tpl "$TEMPLATES_DIR"/*.tpl; do
     filename=$(basename "$tpl" .tpl)
     output_path="$NEXT_THEME_DIR/$filename"
 
     # Don't overwrite configs already exists in the output directory (copied from theme specific folder)
     if [[ ! -f $output_path ]]; then
-      sed -f "$sed_script" "$tpl" > "$output_path"
+      sed -f "$sed_script" "$tpl" >"$output_path"
     fi
   done
 

bin/omarchy-theme-set-vscode

@@ -1,45 +1,39 @@
 #!/bin/bash
 
-# Note: We cannot use `jq` to update settings.json because it’s JSONC (allows comments),
-# which jq doesn’t support.
+# Sync Omarchy theme to VS Code, VSCodium, and Cursor
 
-# Parameters: EDITOR_CMD SETTINGS_PATH SKIP_FLAG EDITOR_NAME
-EDITOR_CMD="${1:-code}"
-SETTINGS_PATH="${2:-$HOME/.config/Code/User/settings.json}"
-SKIP_FLAG="${3:-$HOME/.local/state/omarchy/toggles/skip-vscode-theme-changes}"
 VS_CODE_THEME="$HOME/.config/omarchy/current/theme/vscode.json"
 
-if omarchy-cmd-present "$EDITOR_CMD" && [[ ! -f "$SKIP_FLAG" ]]; then
+set_theme() {
+  local editor_cmd="$1"
+  local settings_path="$2"
+  local skip_flag="$3"
+
+  omarchy-cmd-present "$editor_cmd" && [[ ! -f "$skip_flag" ]] || return 0
+
   if [[ -f "$VS_CODE_THEME" ]]; then
     theme_name=$(jq -r '.name' "$VS_CODE_THEME")
     extension=$(jq -r '.extension' "$VS_CODE_THEME")
 
-    # Install theme extension
-    if [[ -n "$extension" ]] && ! "$EDITOR_CMD" --list-extensions | grep -Fxq "$extension"; then
-      "$EDITOR_CMD" --install-extension "$extension" >/dev/null
+    if [[ -n "$extension" ]] && ! "$editor_cmd" --list-extensions | grep -Fxq "$extension"; then
+      "$editor_cmd" --install-extension "$extension" >/dev/null
     fi
 
-    # Create config file if there isn't already one
-    mkdir -p "$(dirname "$SETTINGS_PATH")"
-    if [[ ! -f "$SETTINGS_PATH" ]]; then
-      printf '{\n}\n' >"$SETTINGS_PATH"
+    mkdir -p "$(dirname "$settings_path")"
+    [[ -f "$settings_path" ]] || printf '{\n}\n' >"$settings_path"
+
+    if ! grep -q '"workbench.colorTheme"' "$settings_path"; then
+      sed -i --follow-symlinks -E '0,/\{/{s/\{/{\ "workbench.colorTheme": "",/}' "$settings_path"
     fi
 
-    # Create a `workbench.colorTheme` entry in settings.
-    if ! grep -q '"workbench.colorTheme"' "$SETTINGS_PATH"; then
-      # Insert `"workbench.colorTheme": "",` immediately after the first `{`
-      # Use sed's first-match range (0,/{/) to only replace the first `{`
-      sed -i --follow-symlinks -E '0,/\{/{s/\{/{\ "workbench.colorTheme": "",/}' "$SETTINGS_PATH"
-    fi
-
-    # Update theme
     sed -i --follow-symlinks -E \
       "s/(\"workbench.colorTheme\"[[:space:]]*:[[:space:]]*\")[^\"]*(\")/\1$theme_name\2/" \
-      "$SETTINGS_PATH"
-  else
-    # Remove theme from settings.json when the theme doesn't have editor support
-    if [[ -f "$SETTINGS_PATH" ]]; then
-      sed -i --follow-symlinks -E 's/\"workbench\.colorTheme\"[[:space:]]*:[^,}]*,?//' "$SETTINGS_PATH"
-    fi
+      "$settings_path"
+  elif [[ -f "$settings_path" ]]; then
+    sed -i --follow-symlinks -E 's/\"workbench\.colorTheme\"[[:space:]]*:[^,}]*,?//' "$settings_path"
   fi
-fi
+}
+
+set_theme "code" "$HOME/.config/Code/User/settings.json" "$HOME/.local/state/omarchy/toggles/skip-vscode-theme-changes"
+set_theme "codium" "$HOME/.config/VSCodium/User/settings.json" "$HOME/.local/state/omarchy/toggles/skip-codium-theme-changes"
+set_theme "cursor" "$HOME/.config/Cursor/User/settings.json" "$HOME/.local/state/omarchy/toggles/skip-cursor-theme-changes"

bin/omarchy-theme-set-vscodium

@@ -1,4 +0,0 @@
-#!/bin/bash
-
-# Call the VSCode theme setter with VSCodium-specific parameters
-omarchy-theme-set-vscode codium "$HOME/.config/VSCodium/User/settings.json" "$HOME/.local/state/omarchy/toggles/skip-codium-theme-changes"

bin/omarchy-toggle-suspend

@@ -0,0 +1,13 @@
+#!/bin/bash
+
+STATE_FILE=~/.local/state/omarchy/toggles/suspend-on
+
+if [[ ! -f $STATE_FILE ]]; then
+  mkdir -p "$(dirname $STATE_FILE)"
+  touch $STATE_FILE
+  notify-send "󰒲   Suspend now available in system menu"
+else
+  mkdir -p "$(dirname $STATE_FILE)"
+  rm -f $STATE_FILE
+  notify-send "󰒲   Suspend removed from system menu"
+fi

bin/omarchy-update-analyze-logs

@@ -0,0 +1,18 @@
+#!/bin/bash
+
+update_log="/tmp/omarchy-update.log"
+
+# Check for errors
+if grep -qi "error" "$update_log"; then
+  echo -e "\e[31mNon-stopping errors detected during update:\e[0m"
+  grep -i "error" "$update_log"
+  echo
+fi
+
+# Check for initramfs generation failure
+if grep -q "Updating linux initcpios" "$update_log"; then
+  if ! grep -q "Initcpio image generation successful" "$update_log"; then
+    echo -e '\e[31mError: Initramfs generation may have failed. Review logs before restart.\e[0m'
+    echo
+  fi
+fi