Fix quirks

bin/omarchy-cmd-screenrecord

@@ -8,82 +8,31 @@ if [[ ! -d "$OUTPUT_DIR" ]]; then
   exit 1
 fi
 
-SCOPE=""
-AUDIO="false"
-WEBCAM="false"
+# Selects region or output
+SCOPE="$1"
 
-for arg in "$@"; do
-  case "$arg" in
-    --with-audio) AUDIO="true" ;;
-    --with-webcam) WEBCAM="true" ;;
-    output|region) SCOPE="$arg" ;;
-  esac
-done
-
-cleanup_webcam() {
-  pkill -f "WebcamOverlay" 2>/dev/null
-}
-
-start_webcam_overlay() {
-  cleanup_webcam
-
-  # Get monitor scale
-  local scale=$(hyprctl monitors -j | jq -r '.[] | select(.focused == true) | .scale')
-
-  # Target width (base 360px, scaled to monitor)
-  local target_width=$(awk "BEGIN {printf \"%.0f\", 360 * $scale}")
-
-  # Try preferred 16:9 resolutions in order, use first available
-  local preferred_resolutions=("640x360" "1280x720" "1920x1080")
-  local video_size_arg=""
-  local available_formats=$(v4l2-ctl --list-formats-ext -d /dev/video0 2>/dev/null)
-
-  for resolution in "${preferred_resolutions[@]}"; do
-    if echo "$available_formats" | grep -q "$resolution"; then
-      video_size_arg="-video_size $resolution"
-      break
-    fi
-  done
-
-  ffplay -f v4l2 $video_size_arg -framerate 30 /dev/video0 \
-    -vf "scale=${target_width}:-1" \
-    -window_title "WebcamOverlay" \
-    -noborder \
-    -fflags nobuffer -flags low_delay \
-    -probesize 32 -analyzeduration 0 \
-    -loglevel quiet &
-  sleep 1
-}
+# Selects audio inclusion or not
+AUDIO=$([[ $2 == "audio" ]] && echo "--audio")
 
 start_screenrecording() {
-  local filename="$OUTPUT_DIR/screenrecording-$(date +'%Y-%m-%d_%H-%M-%S').mp4"
-  local audio_args=""
+  filename="$OUTPUT_DIR/screenrecording-$(date +'%Y-%m-%d_%H-%M-%S').mp4"
 
-  # Merge audio tracks into one - separate tracks only play one at a time in most players
-  [[ "$AUDIO" == "true" ]] && audio_args="-a default_output|default_input"
+  if lspci | grep -qi 'nvidia'; then
+    wf-recorder $AUDIO -f "$filename" -c libx264 -p crf=23 -p preset=medium -p movflags=+faststart "$@" &
+  else
+    wl-screenrec $AUDIO -f "$filename" --ffmpeg-encoder-options="-c:v libx264 -crf 23 -preset medium -movflags +faststart" "$@" &
+  fi
 
-  gpu-screen-recorder -w "$@" -f 60 -c mp4 -o "$filename" $audio_args &
   toggle_screenrecording_indicator
 }
 
 stop_screenrecording() {
-  pkill -SIGINT -f "gpu-screen-recorder"  # SIGINT required to save video properly
+  pkill -x wl-screenrec
+  pkill -x wf-recorder
 
-  # Wait a maximum of 5 seconds to finish before hard killing
-  local count=0
-  while pgrep -f "gpu-screen-recorder" >/dev/null && [ $count -lt 50 ]; do
-    sleep 0.1
-    count=$((count + 1))
-  done
+  notify-send "Screen recording saved to $OUTPUT_DIR" -t 2000
 
-  if pgrep -f "gpu-screen-recorder" >/dev/null; then
-    pkill -9 -f "gpu-screen-recorder"
-    cleanup_webcam
-    notify-send "Screen recording error" "Recording process had to be force-killed. Video may be corrupted." -u critical -t 5000
-  else
-    cleanup_webcam
-    notify-send "Screen recording saved to $OUTPUT_DIR" -t 2000
-  fi
+  sleep 0.2 # ensures the process is actually dead before we check
   toggle_screenrecording_indicator
 }
 
@@ -92,51 +41,14 @@ toggle_screenrecording_indicator() {
 }
 
 screenrecording_active() {
-  pgrep -f "gpu-screen-recorder" >/dev/null || pgrep -x slurp >/dev/null || pgrep -f "WebcamOverlay" >/dev/null
+  pgrep -x wl-screenrec >/dev/null || pgrep -x wf-recorder >/dev/null
 }
 
 if screenrecording_active; then
-  if pgrep -x slurp >/dev/null; then
-    pkill -x slurp 2>/dev/null
-  elif pgrep -f "WebcamOverlay" >/dev/null && ! pgrep -f "gpu-screen-recorder" >/dev/null; then
-    cleanup_webcam
-  else
-    stop_screenrecording
-  fi
+  stop_screenrecording
 elif [[ "$SCOPE" == "output" ]]; then
-  [[ "$WEBCAM" == "true" ]] && start_webcam_overlay
-
-  if ! output=$(slurp -o -f "%o"); then
-    [[ "$WEBCAM" == "true" ]] && cleanup_webcam
-    exit 1
-  fi
-
-  if [[ -z "$output" ]]; then
-    notify-send "Error" "Could not detect monitor" -u critical
-    [[ "$WEBCAM" == "true" ]] && cleanup_webcam
-    exit 1
-  fi
-
-  start_screenrecording "$output"
+  start_screenrecording
 else
-  [[ "$WEBCAM" == "true" ]] && start_webcam_overlay
-
-  scale=$(hyprctl monitors -j | jq -r '.[] | select(.focused == true) | .scale')
-
-  if ! region=$(slurp -f "%wx%h+%x+%y"); then
-    [[ "$WEBCAM" == "true" ]] && cleanup_webcam
-    exit 1
-  fi
-
-  if [[ "$region" =~ ^([0-9]+)x([0-9]+)\+([0-9]+)\+([0-9]+)$ ]]; then
-    w=$(awk "BEGIN {printf \"%.0f\", ${BASH_REMATCH[1]} * $scale}")
-    h=$(awk "BEGIN {printf \"%.0f\", ${BASH_REMATCH[2]} * $scale}")
-    x=$(awk "BEGIN {printf \"%.0f\", ${BASH_REMATCH[3]} * $scale}")
-    y=$(awk "BEGIN {printf \"%.0f\", ${BASH_REMATCH[4]} * $scale}")
-    scaled_region="${w}x${h}+${x}+${y}"
-  else
-    scaled_region="$region"
-  fi
-
-  start_screenrecording region -region "$scaled_region"
+  region=$(slurp) || exit 1
+  start_screenrecording -g "$region"
 fi

bin/omarchy-install-dev-env

@@ -47,7 +47,6 @@ install_node() {
 case "$1" in
 ruby)
   echo -e "Installing Ruby on Rails...\n"
-  omarchy-pkg-add libyaml
   mise use --global ruby@latest
   mise settings add idiomatic_version_file_enable_tools ruby
   mise x ruby -- gem install rails --no-document

bin/omarchy-launch-webapp

@@ -3,7 +3,7 @@
 browser=$(xdg-settings get default-web-browser)
 
 case $browser in
-google-chrome* | brave-browser* | microsoft-edge* | opera* | vivaldi* | helium-browser*) ;;
+google-chrome* | brave-browser* | microsoft-edge* | opera* | vivaldi*) ;;
 *) browser="chromium.desktop" ;;
 esac
 

bin/omarchy-restart-pipewire

@@ -1,4 +1,4 @@
 #!/bin/bash
 
-echo -e "Restarting pipewire audio service...\n"
+echo -e "Restarting pirewire audio service...\n"
 systemctl --user restart pipewire.service

bin/omarchy-tui-install

@@ -43,7 +43,7 @@ cat >"$DESKTOP_FILE" <<EOF
 Version=1.0
 Name=$APP_NAME
 Comment=$APP_NAME
-Exec=\$TERMINAL --class=$APP_CLASS -e $APP_EXEC
+Exec=$TERMINAL --class $APP_CLASS -e $APP_EXEC
 Terminal=false
 Type=Application
 Icon=$ICON_PATH

config/ghostty/config

@@ -12,7 +12,7 @@ window-padding-y = 14
 confirm-close-surface=false
 resize-overlay = never
 
-# Cursor styling
+# Cursor stlying
 cursor-style = "block"
 cursor-style-blink = false
 shell-integration-features = no-cursor

config/hypr/looknfeel.conf

@@ -15,9 +15,3 @@ decoration {
     # Use round window corners
     # rounding = 8
 }
-
-# https://wiki.hypr.land/Configuring/Dwindle-Layout/
-dwindle {
-    # Avoid overly wide single-window layouts on wide screens
-    # single_window_aspect_ratio = 1 1
-}

config/nvim/lua/plugins/all-themes.lua

@@ -0,0 +1,56 @@
+return {
+	-- Load all theme plugins but don't apply them
+	-- This ensures all colorschemes are available for hot-reloading
+	{
+		"ribru17/bamboo.nvim",
+		lazy = true,
+		priority = 1000,
+	},
+	{
+		"catppuccin/nvim",
+		name = "catppuccin",
+		lazy = true,
+		priority = 1000,
+	},
+	{
+		"sainnhe/everforest",
+		lazy = true,
+		priority = 1000,
+	},
+	{
+		"ellisonleao/gruvbox.nvim",
+		lazy = true,
+		priority = 1000,
+	},
+	{
+		"rebelot/kanagawa.nvim",
+		lazy = true,
+		priority = 1000,
+	},
+	{
+		"tahayvr/matteblack.nvim",
+		lazy = true,
+		priority = 1000,
+	},
+	{
+		"loctvl842/monokai-pro.nvim",
+		lazy = true,
+		priority = 1000,
+	},
+	{
+		"shaunsingh/nord.nvim",
+		lazy = true,
+		priority = 1000,
+	},
+	{
+		"rose-pine/neovim",
+		name = "rose-pine",
+		lazy = true,
+		priority = 1000,
+	},
+	{
+		"folke/tokyonight.nvim",
+		lazy = true,
+		priority = 1000,
+	},
+}

config/nvim/lua/plugins/omarchy-theme-hotreload.lua

@@ -0,0 +1,45 @@
+return {
+	{
+		name = "theme-hotreload",
+		dir = vim.fn.stdpath("config"),
+		lazy = false,
+		priority = 1000,
+		config = function()
+			local transparency_file = vim.fn.stdpath("config") .. "/plugin/after/transparency.lua"
+
+			vim.api.nvim_create_autocmd("User", {
+				pattern = "LazyReload",
+				callback = function()
+					package.loaded["plugins.theme"] = nil
+
+					vim.schedule(function()
+						local ok, theme_spec = pcall(require, "plugins.theme")
+						if not ok then
+							return
+						end
+
+						for _, spec in ipairs(theme_spec) do
+							if spec[1] == "LazyVim/LazyVim" and spec.opts and spec.opts.colorscheme then
+								local colorscheme = spec.opts.colorscheme
+
+								require("lazy.core.loader").colorscheme(colorscheme)
+
+								vim.defer_fn(function()
+									pcall(vim.cmd.colorscheme, colorscheme)
+
+									if vim.fn.filereadable(transparency_file) == 1 then
+										vim.defer_fn(function()
+											vim.cmd.source(transparency_file)
+										end, 5)
+									end
+								end, 5)
+
+								break
+							end
+						end
+					end)
+				end,
+			})
+		end,
+	},
+}

config/nvim/lua/plugins/theme.lua

@@ -1,8 +0,0 @@
-return {
-	{
-		"LazyVim/LazyVim",
-		opts = {
-			colorscheme = "tokyonight",
-		},
-	},
-}

default/hypr/apps.conf

@@ -12,4 +12,3 @@ source = ~/.local/share/omarchy/default/hypr/apps/steam.conf
 source = ~/.local/share/omarchy/default/hypr/apps/system.conf
 source = ~/.local/share/omarchy/default/hypr/apps/terminals.conf
 source = ~/.local/share/omarchy/default/hypr/apps/walker.conf
-source = ~/.local/share/omarchy/default/hypr/apps/webcam-overlay.conf

default/hypr/apps/steam.conf

@@ -1,4 +1,4 @@
-# Float Steam
+# Float Steam, fullscreen RetroArch
 windowrule = float, class:steam
 windowrule = center, class:steam, title:Steam
 windowrule = opacity 1 1, class:steam

default/hypr/apps/webcam-overlay.conf

@@ -1,6 +0,0 @@
-# Webcam overlay for screen recording
-windowrule = float, title:WebcamOverlay
-windowrule = pin, title:WebcamOverlay
-windowrule = noinitialfocus, title:WebcamOverlay
-windowrule = nodim, title:WebcamOverlay
-windowrule = move 100%-w-40 100%-w-40, title:WebcamOverlay # There's a typo in the hyprland rule so 100%-w on the height param is actually correct here

default/hypr/bindings/utilities.conf

@@ -36,9 +36,9 @@ bindd = CTRL, PRINT, Screenshot of display, exec, omarchy-cmd-screenshot output
 
 # Screen recordings
 bindd = ALT, PRINT, Screen record a region, exec, omarchy-cmd-screenrecord region
-bindd = ALT SHIFT, PRINT, Screen record a region with audio, exec, omarchy-cmd-screenrecord region --with-audio
+bindd = ALT SHIFT, PRINT, Screen record a region with audio, exec, omarchy-cmd-screenrecord region audio
 bindd = CTRL ALT, PRINT, Screen record display, exec, omarchy-cmd-screenrecord output
-bindd = CTRL ALT SHIFT, PRINT, Screen record display with audio, exec, omarchy-cmd-screenrecord output --with-audio
+bindd = CTRL ALT SHIFT, PRINT, Screen record display with audio, exec, omarchy-cmd-screenrecord output audio
 
 # Color picker
 bindd = SUPER, PRINT, Color picker, exec, pkill hyprpicker || hyprpicker -a

default/waybar/indicators/screen-recording.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-if pgrep -f "gpu-screen-recorder" >/dev/null; then
+if pgrep -x wl-screenrec >/dev/null || pgrep -x wf-recorder >/dev/null; then
   echo '{"text": "󰻂", "tooltip": "Stop recording", "class": "active"}'
 else
   echo '{"text": ""}'

install/config/all.sh

@@ -24,6 +24,6 @@ run_logged $OMARCHY_INSTALL/config/hardware/usb-autosuspend.sh
 run_logged $OMARCHY_INSTALL/config/hardware/ignore-power-button.sh
 run_logged $OMARCHY_INSTALL/config/hardware/nvidia.sh
 run_logged $OMARCHY_INSTALL/config/hardware/fix-f13-amd-audio-input.sh
-run_logged $OMARCHY_INSTALL/config/hardware/fix-apple-bcm43xx.sh
+run_logged $OMARCHY_INSTALL/config/hardware/fix-apple-bcm4360.sh
 run_logged $OMARCHY_INSTALL/config/hardware/fix-apple-spi-keyboard.sh
 run_logged $OMARCHY_INSTALL/config/hardware/fix-apple-t2.sh

install/config/hardware/fix-apple-bcm4360.sh

@@ -0,0 +1,5 @@
+# Install wifi drivers for 2013-2015 MacBooks using the BCM4360 chip
+if lspci -nnv | grep -A2 "14e4:43a0" | grep -q "106b:"; then
+  echo "Apple BCM4360 detected"
+  sudo pacman -S --noconfirm --needed broadcom-wl dkms linux-headers
+fi

install/config/hardware/fix-apple-bcm43xx.sh

@@ -1,11 +0,0 @@
-# Install Wi-Fi drivers for Broadcom chips on MacBooks:
-# - BCM4360 (2013–2015)
-# - BCM4331 (2012, early 2013)
-
-pci_info=$(lspci -nnv)
-
-if echo "$pci_info" | grep -q "106b:" && 
-  (echo "$pci_info" | grep -q "14e4:43a0" || echo "$pci_info" | grep -q "14e4:4331"); then
-  echo "Apple BCM4360 / BCM4331 detected"
-  sudo pacman -S --noconfirm --needed broadcom-wl dkms linux-headers
-fi

install/config/hardware/fix-apple-spi-keyboard.sh

@@ -1,12 +1,7 @@
 # Detect MacBook models that need SPI keyboard modules
-product_name="$(cat /sys/class/dmi/id/product_name 2>/dev/null)"
-if [[ "$product_name" =~ MacBook[89],1|MacBook1[02],1|MacBookPro13,[123]|MacBookPro14,[123] ]]; then
+if [[ "$(cat /sys/class/dmi/id/product_name 2>/dev/null)" =~ MacBook12,1|MacBookPro13,[123]|MacBookPro14,[123] ]]; then
   echo "Detected MacBook with SPI keyboard"
 
   sudo pacman -S --noconfirm --needed macbook12-spi-driver-dkms
-  if [[ "$product_name" == "MacBook8,1" ]]; then
-    echo "MODULES=(applespi spi_pxa2xx_platform spi_pxa2xx_pci)" | sudo tee /etc/mkinitcpio.conf.d/macbook_spi_modules.conf >/dev/null
-  else
-    echo "MODULES=(applespi intel_lpss_pci spi_pxa2xx_platform)" | sudo tee /etc/mkinitcpio.conf.d/macbook_spi_modules.conf >/dev/null
-  fi
+  echo "MODULES=(applespi intel_lpss_pci spi_pxa2xx_platform)" | sudo tee /etc/mkinitcpio.conf.d/macbook_spi_modules.conf >/dev/null
 fi

install/iso.sh

@@ -0,0 +1,14 @@
+# Called by Omarchy ISO setup before starting configurator and archinstall
+
+source "$OMARCHY_INSTALL/preflight/set-size-vars.sh"
+source "$OMARCHY_INSTALL/helpers/logo.sh"
+source "$OMARCHY_INSTALL/preflight/gum.sh"
+source "$OMARCHY_INSTALL/helpers/tail-log-output.sh"
+source "$OMARCHY_INSTALL/helpers/trap-errors.sh"
+
+source $OMARCHY_INSTALL/helpers/chroot.sh
+source $OMARCHY_INSTALL/helpers/logo.sh
+source $OMARCHY_INSTALL/helpers/gum.sh
+source $OMARCHY_INSTALL/helpers/errors.sh
+source $OMARCHY_INSTALL/helpers/logging.sh
+source $OMARCHY_INSTALL/helpers/layout.sh

install/omarchy-base.packages

@@ -35,7 +35,6 @@ github-cli
 gnome-calculator
 gnome-keyring
 gnome-themes-extra
-gpu-screen-recorder
 gum
 gvfs-mtp
 gvfs-smb
@@ -114,12 +113,14 @@ unzip
 uwsm
 walker-bin
 waybar
+wf-recorder
 whois
 wireless-regdb
 wiremix
 wireplumber
 wl-clip-persist
 wl-clipboard
+wl-screenrec
 woff2-font-awesome
 xdg-desktop-portal-gtk
 xdg-desktop-portal-hyprland

migrations/1758081785.sh

@@ -0,0 +1,4 @@
+echo "Add live themeing to neovim"
+
+cp -f $OMARCHY_PATH/config/nvim/lua/plugins/all-themes.lua ~/.config/nvim/lua/plugins/
+cp -f $OMARCHY_PATH/config/nvim/lua/plugins/omarchy-theme-hotreload.lua ~/.config/nvim/lua/plugins/

migrations/1758318253.sh

@@ -0,0 +1,3 @@
+echo "Ensure libyaml is available for installing Ruby"
+
+omarchy-pkg-add libyaml

migrations/1758436991.sh

@@ -1,17 +0,0 @@
-echo "Fix Disk Usage and Docker TUIs"
-
-APP_DIR="$HOME/.local/share/applications"
-ICON_DIR="$APP_DIR/icons"
-
-# Don't use omarchy-tui-remove to preserve icons
-
-if [[ -f "$APP_DIR/Docker.desktop" ]]; then
-  rm "$APP_DIR/Docker.desktop"
-  omarchy-tui-install "Docker" "lazydocker" tile "$ICON_DIR/Docker.png"
-fi
-
-if [[ -f "$APP_DIR/Disk Usage.desktop" ]]; then
-  rm "$APP_DIR/Disk Usage.desktop" 
-  omarchy-tui-install "Disk Usage" "bash -c 'dust -r; read -n 1 -s'" float "$ICON_DIR/Disk Usage.png"
-fi
-

migrations/1760144906.sh

@@ -1,3 +0,0 @@
-echo "Change omarchy-screenrecord to use gpu-screen-recorder"
-omarchy-pkg-drop wf-recorder wl-screenrec
-omarchy-pkg-add gpu-screen-recorder

themes/catppuccin-latte/neovim.lua

@@ -3,12 +3,9 @@ return {
 		"catppuccin/nvim",
 		name = "catppuccin",
 		priority = 1000,
-		config = function()
-			require("catppuccin").setup({
-				flavour = "latte", -- other options: "mocha", "frappe", "macchiato"
-			})
-			vim.cmd.colorscheme("catppuccin-latte")
-		end,
+		opts = {
+			flavour = "latte",
+		},
 	},
 	{
 		"LazyVim/LazyVim",

themes/catppuccin/neovim.lua

@@ -1,4 +1,9 @@
 return {
+	{
+		"catppuccin/nvim",
+		name = "catppuccin",
+		priority = 1000,
+	},
 	{
 		"LazyVim/LazyVim",
 		opts = {

themes/osaka-jade/neovim.lua

@@ -1,9 +1,13 @@
 return {
-	"ribru17/bamboo.nvim",
-	lazy = false,
-	priority = 1000,
-	config = function()
-		require("bamboo").setup({})
-		require("bamboo").load()
-	end,
+	{
+		"ribru17/bamboo.nvim",
+		priority = 1000,
+		opts = {},
+	},
+	{
+		"LazyVim/LazyVim",
+		opts = {
+			colorscheme = "bamboo",
+		},
+	},
 }

themes/ristretto/neovim.lua

@@ -1,31 +1,14 @@
 return {
-  {
-    "gthelding/monokai-pro.nvim",
-    config = function()
-      require("monokai-pro").setup({
-        filter = "ristretto",
-        override = function()
-          return {
-            NonText = { fg = "#948a8b" },
-            MiniIconsGrey = { fg = "#948a8b" },
-	    MiniIconsRed = { fg = "#fd6883" },
-	    MiniIconsBlue = { fg = "#85dacc" },
-	    MiniIconsGreen = { fg = "#adda78" },
-	    MiniIconsYellow = { fg = "#f9cc6c" },
-	    MiniIconsOrange = { fg = "#f38d70" },
-	    MiniIconsPurple = { fg = "#a8a9eb" },
-	    MiniIconsAzure = { fg = "#a8a9eb" },
-	    MiniIconsCyan = { fg = "#85dacc" }, -- same value as MiniIconsBlue for consistency
-          }
-        end,
-      })
-      vim.cmd([[colorscheme monokai-pro]])
-    end,
-  },
-  {
-    "LazyVim/LazyVim",
-    opts = {
-      colorscheme = "monokai-pro",
-    },
-  },
+	{
+		"loctvl842/monokai-pro.nvim",
+		opts = {
+			filter = "ristretto",
+		},
+	},
+	{
+		"LazyVim/LazyVim",
+		opts = {
+			colorscheme = "monokai-pro",
+		},
+	},
 }

themes/tokyo-night/neovim.lua

@@ -1,8 +1,12 @@
 return {
+	{
+		"folke/tokyonight.nvim",
+		priority = 1000,
+	},
 	{
 		"LazyVim/LazyVim",
 		opts = {
-			colorscheme = "tokyonight",
+			colorscheme = "tokyonight-night",
 		},
 	},
 }