Add menu option for updating drive encryption and user passwords

bin/omarchy-cmd-audio-switch

@@ -1,50 +1,19 @@
 #!/bin/bash
 
-focused_monitor="$(hyprctl monitors -j | jq -r '.[] | select(.focused == true).name')"
+# Find all the audio sinks but exit if there are none
+sinks=($(wpctl status | sed -n '/Sinks:/,/Sources:/p' | grep -E '^\s*│\s+\*?\s*[0-9]+\.' | sed -E 's/^[^0-9]*([0-9]+)\..*/\1/'))
+[ ${#sinks[@]} -eq 0 ] && exit 1
 
-sinks=$(pactl -f json list sinks | jq '[.[] | select([.ports[]? | .availability == "available"] | any)]')
+# Find current audio sink
-sinks_count=$(echo "$sinks" | jq '. | length')
+current=$(wpctl status | sed -n '/Sinks:/,/Sources:/p' | grep '^\s*│\s*\*' | sed -E 's/^[^0-9]*([0-9]+)\..*/\1/')
 
-if [ "$sinks_count" -eq 0 ]; then
+# Find the next sink (looping around in the list)
-  swayosd-client \
+for i in "${!sinks[@]}"; do
-    --monitor "$focused_monitor" \
+  [ "${sinks[$i]}" = "$current" ] && next=${sinks[$(((i + 1) % ${#sinks[@]}))]}
-    --custom-message "No audio devices found"
+done
-  exit 1
+next=${next:-${sinks[0]}}
-fi
 
-current_sink_name=$(pactl get-default-sink)
+# Set the next sink and ensure it's not muted
-current_sink_index=$(echo "$sinks" | jq -r --arg name "$current_sink_name" 'map(.name) | index($name)')
+wpctl set-default "$next"
+wpctl set-mute "$next" 0
 
-if [ "$current_sink_index" != "null" ]; then
-  next_sink_index=$(((current_sink_index + 1) % sinks_count))
-else
-  next_sink_index=0
-fi
-
-next_sink=$(echo "$sinks" | jq -r ".[$next_sink_index]")
-next_sink_name=$(echo "$next_sink" | jq -r '.name')
-next_sink_description=$(echo "$next_sink" | jq -r '.description')
-next_sink_volume=$(echo "$next_sink" | jq -r \
-  '.volume | to_entries[0].value.value_percent | sub("%"; "")')
-next_sink_is_muted=$(echo "$next_sink" | jq -r '.mute')
-
-if [ "$next_sink_is_muted" = "true" ] || [ "$next_sink_volume" -eq 0 ]; then
-  icon_state="muted"
-elif [ "$next_sink_volume" -le 33 ]; then
-  icon_state="low"
-elif [ "$next_sink_volume" -le 66 ]; then
-  icon_state="medium"
-else
-  icon_state="high"
-fi
-
-next_sink_volume_icon="sink-volume-${icon_state}-symbolic"
-
-if [ "$next_sink_name" != "$current_sink_name" ]; then
-  pactl set-default-sink "$next_sink_name"
-fi
-
-swayosd-client \
-  --monitor "$focused_monitor" \
-  --custom-message "$next_sink_description" \
-  --custom-icon "$next_sink_volume_icon"

bin/omarchy-cmd-first-run

@@ -6,8 +6,7 @@ FIRST_RUN_MODE=~/.local/state/omarchy/first-run.mode
 
 if [[ -f "$FIRST_RUN_MODE" ]]; then
   rm -f "$FIRST_RUN_MODE"
-  bash "$OMARCHY_PATH/install/first-run/battery-monitor.sh"
+  $OMARCHY_PATH/install/first-run/battery-monitor.sh
-  bash "$OMARCHY_PATH/install/first-run/firewall.sh"
+  $OMARCHY_PATH/install/first-run/firewall.sh
-  bash "$OMARCHY_PATH/install/first-run/gnome-theme.sh"
   sudo rm -f /etc/sudoers.d/first-run
 fi

bin/omarchy-cmd-screenrecord

@@ -8,47 +8,31 @@ if [[ ! -d "$OUTPUT_DIR" ]]; then
   exit 1
 fi
 
-# Selects region or output
+if [[ $2 == "audio" ]]; then
-SCOPE="$1"
+  AUDIO="--audio"
+else
+  AUDIO=""
+fi
 
-# Selects audio inclusion or not
+screenrecording() {
-AUDIO=$([[ $2 == "audio" ]] && echo "--audio")
-
-start_screenrecording() {
   filename="$OUTPUT_DIR/screenrecording-$(date +'%Y-%m-%d_%H-%M-%S').mp4"
+  notify-send "Screen recording starting..." -t 1000
+  sleep 1
 
   if lspci | grep -Eqi 'nvidia|intel.*graphics'; then
-    wf-recorder $AUDIO -f "$filename" -c libx264 -p crf=23 -p preset=medium -p movflags=+faststart "$@" &
+    wf-recorder $AUDIO -f "$filename" -c libx264 -p crf=23 -p preset=medium -p movflags=+faststart "$@"
   else
-    wl-screenrec $AUDIO -f "$filename" --ffmpeg-encoder-options="-c:v libx264 -crf 23 -preset medium -movflags +faststart" "$@" &
+    wl-screenrec $AUDIO -f "$filename" --ffmpeg-encoder-options="-c:v libx264 -crf 23 -preset medium -movflags +faststart" "$@"
   fi
-
-  toggle_screenrecording_indicator
 }
 
-stop_screenrecording() {
+if pgrep -x wl-screenrec >/dev/null || pgrep -x wf-recorder >/dev/null; then
   pkill -x wl-screenrec
   pkill -x wf-recorder
-
   notify-send "Screen recording saved to $OUTPUT_DIR" -t 2000
-
+elif [[ "$1" == "output" ]]; then
-  sleep 0.2 # ensures the process is actually dead before we check
+  screenrecording
-  toggle_screenrecording_indicator
-}
-
-toggle_screenrecording_indicator() {
-  pkill -RTMIN+8 waybar
-}
-
-screenrecording_active() {
-  pgrep -x wl-screenrec >/dev/null || pgrep -x wf-recorder >/dev/null
-}
-
-if screenrecording_active; then
-  stop_screenrecording
-elif [[ "$SCOPE" == "output" ]]; then
-  start_screenrecording
 else
   region=$(slurp) || exit 1
-  start_screenrecording -g "$region"
+  screenrecording -g "$region"
 fi

bin/omarchy-cmd-screenrecord-stop

@@ -0,0 +1,7 @@
+#!/bin/bash
+
+if pgrep -x wl-screenrec >/dev/null || pgrep -x wf-recorder >/dev/null; then
+  pkill -x wl-screenrec
+  pkill -x wf-recorder
+  notify-send "Screen recording stopped" -t 2000
+fi

bin/omarchy-cmd-screensaver

@@ -1,7 +1,6 @@
 #!/bin/bash
 
 function exit_screensaver {
-  hyprctl keyword cursor:invisible false
   pkill -x tte 2>/dev/null
   pkill -f "alacritty --class Screensaver" 2>/dev/null
   exit 0
@@ -9,8 +8,6 @@ function exit_screensaver {
 
 trap exit_screensaver SIGINT SIGTERM SIGHUP SIGQUIT
 
-hyprctl keyword cursor:invisible true
-
 while true; do
   effect=$(tte 2>&1 | grep -oP '{\K[^}]+' | tr ',' ' ' | tr ' ' '\n' | sed -n '/^beams$/,$p' | sort -u | shuf -n1)
   tte -i ~/.config/omarchy/branding/screensaver.txt \

bin/omarchy-install-dev-env

@@ -1,7 +1,7 @@
 #!/bin/bash
 
 if [[ -z "$1" ]]; then
-  echo "Usage: omarchy-install-dev-env <ruby|node|bun|go|laravel|symfony|php|python|elixir|phoenix|rust|java|ocaml|dotnet|clojure>" >&2
+  echo "Usage: omarchy-install-dev-env <ruby|node|bun|go|laravel|symfony|php|python|elixir|phoenix|rust|java|ocaml|dotnet>" >&2
   exit 1
 fi
 
@@ -131,9 +131,4 @@ dotnet)
   echo -e "Installing .NET...\n"
   mise use --global dotnet@latest
   ;;
-clojure)
-  echo -e "Installing Clojure...\n"
-  omarchy-pkg-add rlwrap
-  mise use --global clojure@latest
-  ;;
 esac

bin/omarchy-install-docker-dbs

@@ -3,7 +3,7 @@
 options=("MySQL" "PostgreSQL" "Redis" "MongoDB" "MariaDB")
 
 if [[ "$#" -eq 0 ]]; then
-  choices=$(printf "%s\n" "${options[@]}" | gum choose --header "Select databases (space to select, return to install, esc to cancel)") || main_menu
+  choices=$(printf "%s\n" "${options[@]}" | gum choose --no-limit --header "Select databases (space to select, return to install, esc to cancel)") || main_menu
 else
   choices="$@"
 fi
@@ -12,7 +12,7 @@ if [[ -n "$choices" ]]; then
   for db in $choices; do
     case $db in
     MySQL) sudo docker run -d --restart unless-stopped -p "127.0.0.1:3306:3306" --name=mysql8 -e MYSQL_ROOT_PASSWORD= -e MYSQL_ALLOW_EMPTY_PASSWORD=true mysql:8.4 ;;
-    PostgreSQL) sudo docker run -d --restart unless-stopped -p "127.0.0.1:5432:5432" --name=postgres17 -e POSTGRES_HOST_AUTH_METHOD=trust postgres:17 ;;
+    PostgreSQL) sudo docker run -d --restart unless-stopped -p "127.0.0.1:5432:5432" --name=postgres16 -e POSTGRES_HOST_AUTH_METHOD=trust postgres:16 ;;
     MariaDB) sudo docker run -d --restart unless-stopped -p "127.0.0.1:3306:3306" --name=mariadb11 -e MARIADB_ROOT_PASSWORD= -e MARIADB_ALLOW_EMPTY_ROOT_PASSWORD=true mariadb:11.8 ;;
     Redis) sudo docker run -d --restart unless-stopped -p "127.0.0.1:6379:6379" --name=redis redis:7 ;;
     MongoDB) sudo docker run -d --restart unless-stopped -p "127.0.0.1:27017:27017" --name mongodb -e MONGO_INITDB_ROOT_USERNAME=admin -e MONGO_INITDB_ROOT_PASSWORD=admin123 mongo:noble ;;

bin/omarchy-install-steam

@@ -1,5 +1,8 @@
 #!/bin/bash
 
+echo "Adding multilib repository for 32-bit compatibility"
+sudo sed -i '/^#\s*\[multilib\]/,/^#\s*Include/ s/^#\s*//' /etc/pacman.conf
+
 echo "Now pick dependencies matching your graphics card"
 sudo pacman -Syu --noconfirm steam
 setsid gtk-launch steam >/dev/null 2>&1 &

bin/omarchy-menu

@@ -2,21 +2,6 @@
 
 export PATH="$HOME/.local/share/omarchy/bin:$PATH"
 
-# Set to true when going directly to a submenu, so we can exit directly
-BACK_TO_EXIT=false
-
-back_to() {
-  local parent_menu="$1"
-
-  if [[ "$BACK_TO_EXIT" == "true" ]]; then
-    exit 0
-  elif [[ -n "$parent_menu" ]]; then
-    "$parent_menu"
-  else
-    show_main_menu
-  fi
-}
-
 menu() {
   local prompt="$1"
   local options="$2"
@@ -95,7 +80,7 @@ show_style_menu() {
 show_theme_menu() {
   theme=$(menu "Theme" "$(omarchy-theme-list)" "" "$(omarchy-theme-current)")
   if [[ "$theme" == "CNCLD" || -z "$theme" ]]; then
-    back_to show_style_menu
+    show_main_menu
   else
     omarchy-theme-set "$theme"
   fi
@@ -104,7 +89,7 @@ show_theme_menu() {
 show_font_menu() {
   theme=$(menu "Font" "$(omarchy-font-list)" "-w 350" "$(omarchy-font-current)")
   if [[ "$theme" == "CNCLD" || -z "$theme" ]]; then
-    back_to show_style_menu
+    show_main_menu
   else
     omarchy-font-set "$theme"
   fi
@@ -129,10 +114,8 @@ show_screenshot_menu() {
 }
 
 show_screenrecord_menu() {
-  case $(menu "Screenrecord" "  Region\n  Region + Audio\n  Display\n  Display + Audio") in
+  case $(menu "Screenrecord" "  Region\n  Display") in
-  *"Region + Audio"*) omarchy-cmd-screenrecord region audio ;;
   *Region*) omarchy-cmd-screenrecord ;;
-  *"Display + Audio"*) omarchy-cmd-screenrecord output audio ;;
   *Display*) omarchy-cmd-screenrecord output ;;
   *) show_capture_menu ;;
   esac
@@ -180,7 +163,7 @@ show_setup_power_menu() {
   profile=$(menu "Power Profile" "$(omarchy-powerprofiles-list)" "" "$(powerprofilesctl get)")
 
   if [[ "$profile" == "CNCLD" || -z "$profile" ]]; then
-    back_to show_setup_menu
+    show_main_menu
   else
     powerprofilesctl set "$profile"
   fi
@@ -244,10 +227,10 @@ show_install_ai_menu() {
       echo ollama
   )
 
-  case $(menu "Install" "󱚤  Claude Code\n󱚤  Gemini [AUR]\n󱚤  OpenAI Codex [AUR]\n󱚤  LM Studio\n󱚤  Ollama\n󱚤  Crush\n󱚤  opencode") in
+  case $(menu "Install" "󱚤  Claude Code\n󱚤  Gemini\n󱚤  OpenAI Codex [AUR]\n󱚤  LM Studio\n󱚤  Ollama\n󱚤  Crush\n󱚤  opencode") in
   *Claude*) install "Claude Code" "claude-code" ;;
   *OpenAI*) aur_install "OpenAI Codex" "openai-codex-bin" ;;
-  *Gemini*) aur_install "Gemini" "gemini-cli" ;;
+  *Gemini*) install "Gemini" "gemini-cli" ;;
   *Studio*) install "LM Studio" "lmstudio" ;;
   *Ollama*) install "Ollama" $ollama_pkg ;;
   *Crush*) install "Crush" "crush-bin" ;;
@@ -285,7 +268,7 @@ show_install_font_menu() {
 }
 
 show_install_development_menu() {
-  case $(menu "Install" "󰫏  Ruby on Rails\n  Docker DB\n  JavaScript\n  Go\n  PHP\n  Python\n  Elixir\n  Zig\n  Rust\n  Java\n  .NET\n  OCaml\n  Clojure") in
+  case $(menu "Install" "󰫏  Ruby on Rails\n  Docker DB\n  JavaScript\n  Go\n  PHP\n  Python\n  Elixir\n  Zig\n  Rust\n  Java\n  .NET\n  OCaml") in
   *Rails*) present_terminal "omarchy-install-dev-env ruby" ;;
   *Docker*) present_terminal omarchy-install-docker-dbs ;;
   *JavaScript*) show_install_javascript_menu ;;
@@ -298,7 +281,6 @@ show_install_development_menu() {
   *Java*) present_terminal "omarchy-install-dev-env java" ;;
   *NET*) present_terminal "omarchy-install-dev-env dotnet" ;;
   *OCaml*) present_terminal "omarchy-install-dev-env ocaml" ;;
-  *Clojure*) present_terminal "omarchy-install-dev-env clojure" ;;
   *) show_install_menu ;;
   esac
 }
@@ -403,7 +385,7 @@ show_system_menu() {
   *Relaunch*) uwsm stop ;;
   *Restart*) systemctl reboot ;;
   *Shutdown*) systemctl poweroff ;;
-  *) back_to show_main_menu ;;
+  *) show_main_menu ;;
   esac
 }
 
@@ -432,7 +414,6 @@ go_to_menu() {
 }
 
 if [[ -n "$1" ]]; then
-  BACK_TO_EXIT=true
   go_to_menu "$1"
 else
   show_main_menu

bin/omarchy-menu-keybindings

@@ -83,11 +83,7 @@ parse_bindings() {
 }'
 }
 
-monitor_height=$(hyprctl monitors -j | jq -r '.[] | select(.focused == true) | .height')
-menu_height=$((monitor_height * 40 / 100))
-
 dynamic_bindings | \
   sort -u | \
   parse_bindings | \
-  walker --dmenu --theme keybindings -p 'Keybindings' -w 800 -h "$menu_height"
+  walker --dmenu --theme keybindings -p 'Keybindings'
-

bin/omarchy-pkg-aur-install

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+set -e
+
 fzf_args=(
   --multi
   --preview 'yay -Sii {1}'

bin/omarchy-pkg-install

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+set -e
+
 fzf_args=(
   --multi
   --preview 'pacman -Sii {1}'
@@ -17,5 +19,6 @@ pkg_names=$(pacman -Slq | fzf "${fzf_args[@]}")
 if [[ -n "$pkg_names" ]]; then
   # Convert newline-separated selections to space-separated for yay
   echo "$pkg_names" | tr '\n' ' ' | xargs sudo pacman -S --noconfirm
+  sudo updatedb
   omarchy-show-done
 fi

bin/omarchy-pkg-remove

@@ -17,5 +17,6 @@ pkg_names=$(yay -Qqe | fzf "${fzf_args[@]}")
 if [[ -n "$pkg_names" ]]; then
   # Convert newline-separated selections to space-separated for yay
   echo "$pkg_names" | tr '\n' ' ' | xargs sudo pacman -Rns --noconfirm
+  sudo updatedb
   omarchy-show-done
 fi

bin/omarchy-refresh-plymouth

@@ -1,10 +1,6 @@
 #!/bin/bash
 
-sudo cp ~/.local/share/omarchy/default/plymouth/* /usr/share/plymouth/themes/omarchy/
+if [[ "$1" == "-y" ]]; then
-sudo plymouth-set-default-theme omarchy
+  sudo cp ~/.local/share/omarchy/default/plymouth/* /usr/share/plymouth/themes/omarchy/
-
+  sudo plymouth-set-default-theme -R omarchy
-if command -v limine-mkinitcpio &>/dev/null; then
-  sudo limine-mkinitcpio
-else
-  sudo mkinitcpio -P
 fi

bin/omarchy-setup-dns

@@ -37,6 +37,8 @@ EOF
 DHCP)
   sudo tee /etc/systemd/resolved.conf >/dev/null <<'EOF'
 [Resolve]
+DNS=
+FallbackDNS=
 DNSOverTLS=no
 EOF
   

bin/omarchy-tui-install

@@ -20,16 +20,13 @@ fi
 
 ICON_DIR="$HOME/.local/share/applications/icons"
 DESKTOP_FILE="$HOME/.local/share/applications/$APP_NAME.desktop"
+ICON_PATH="$ICON_DIR/$APP_NAME.png"
 
-if [[ ! "$ICON_URL" =~ ^https?:// ]] && [ -f "$ICON_URL" ]; then
+mkdir -p "$ICON_DIR"
-  ICON_PATH="$ICON_URL"
+
-else
+if ! curl -sL -o "$ICON_PATH" "$ICON_URL"; then
-  ICON_PATH="$ICON_DIR/$APP_NAME.png"
-  mkdir -p "$ICON_DIR"
-  if ! curl -sL -o "$ICON_PATH" "$ICON_URL"; then
   echo "Error: Failed to download icon."
-    exit 1
+  return 1
-  fi
 fi
 
 if [[ $WINDOW_STYLE == "float" ]]; then

bin/omarchy-update

@@ -7,4 +7,4 @@ omarchy-update-git
 omarchy-migrate
 omarchy-update-system-pkgs
 omarchy-update-restart
-omarchy-update-available-reset
+omarchy-restart-waybar # removes update-available icon

bin/omarchy-update-available-reset

@@ -1,4 +0,0 @@
-#!/bin/bash
-
-# Ensure Waybar icon offering the available update is removed
-pkill -RTMIN+7 waybar

bin/omarchy-update-git

@@ -1,6 +1,5 @@
 #!/bin/bash
 
 echo -e "\e[32mUpdate Omarchy\e[0m"
-
 git -C $OMARCHY_PATH pull --autostash
 git -C $OMARCHY_PATH diff --check || git -C $OMARCHY_PATH reset --merge

bin/omarchy-upload-log

@@ -1,126 +0,0 @@
-#!/bin/bash
-
-# Upload logs to 0x0.st
-
-LOG_TYPE="${1:-install}"
-TEMP_LOG="/tmp/upload-log.txt"
-SYSTEM_INFO="/tmp/system-info.txt"
-
-# Get system information if fastfetch is available
-if command -v fastfetch >/dev/null 2>&1; then
-  {
-    echo "========================================="
-    echo "SYSTEM INFORMATION"
-    echo "========================================="
-    # Use fastfetch with no logo to get clean output
-    fastfetch --logo none --pipe 2>/dev/null || echo "Failed to get system info"
-    echo ""
-    echo "========================================="
-    echo "LOG CONTENT"
-    echo "========================================="
-    echo ""
-  } >"$SYSTEM_INFO"
-else
-  # Fallback to basic info if fastfetch isn't available
-  {
-    echo "========================================="
-    echo "SYSTEM INFORMATION"
-    echo "========================================="
-    echo "Hostname: $(hostname)"
-    echo "Kernel: $(uname -r)"
-    echo "Date: $(date)"
-    echo ""
-    echo "========================================="
-    echo "LOG CONTENT"
-    echo "========================================="
-    echo ""
-  } >"$SYSTEM_INFO"
-fi
-
-case "$LOG_TYPE" in
-install)
-  ARCHINSTALL_LOG="/var/log/archinstall/install.log"
-  OMARCHY_LOG="/var/log/omarchy-install.log"
-
-  # Combine system info with logs
-  cat "$SYSTEM_INFO" >"$TEMP_LOG"
-  cat $ARCHINSTALL_LOG $OMARCHY_LOG >>"$TEMP_LOG" 2>/dev/null
-
-  if [ ! -s "$TEMP_LOG" ]; then
-    echo "Error: No install logs found"
-    exit 1
-  fi
-
-  echo "Uploading installation log to 0x0.st..."
-  ;;
-
-this-boot)
-  # Combine system info with boot logs
-  cat "$SYSTEM_INFO" >"$TEMP_LOG"
-  journalctl -b 0 >>"$TEMP_LOG" 2>/dev/null
-
-  if [ ! -s "$TEMP_LOG" ]; then
-    echo "Error: No logs found for current boot"
-    exit 1
-  fi
-
-  echo "Uploading current boot logs to 0x0.st..."
-  ;;
-
-last-boot)
-  # Combine system info with previous boot logs
-  cat "$SYSTEM_INFO" >"$TEMP_LOG"
-  journalctl -b -1 >>"$TEMP_LOG" 2>/dev/null
-
-  if [ ! -s "$TEMP_LOG" ]; then
-    echo "Error: No logs found for previous boot"
-    exit 1
-  fi
-
-  echo "Uploading previous boot logs to 0x0.st..."
-  ;;
-
-installed)
-  # System info plus all installed packages
-  cat "$SYSTEM_INFO" >"$TEMP_LOG"
-  {
-    echo ""
-    echo "========================================="
-    echo "INSTALLED PACKAGES (pacman -Q)"
-    echo "========================================="
-    pacman -Q 2>/dev/null || echo "Failed to get package list"
-  } >>"$TEMP_LOG"
-
-  if [ ! -s "$TEMP_LOG" ]; then
-    echo "Error: Failed to gather system information"
-    exit 1
-  fi
-
-  echo "Uploading system information to 0x0.st..."
-  ;;
-
-*)
-  echo "Usage: $0 [install|this-boot|last-boot|system-info]"
-  echo "  install      - Upload installation logs (default)"
-  echo "  this-boot    - Upload logs from current boot"
-  echo "  last-boot    - Upload logs from previous boot"
-  echo "  installed    - Upload system info and installed packages"
-  exit 1
-  ;;
-esac
-
-echo ""
-
-URL=$(curl -sF "file=@$TEMP_LOG" -Fexpires=24 https://0x0.st)
-
-if [ $? -eq 0 ] && [ -n "$URL" ]; then
-  echo "✓ Log uploaded successfully!"
-  echo "Share this URL:"
-  echo ""
-  echo "  $URL"
-  echo ""
-  echo "This link will expire in 24 hours."
-else
-  echo "Error: Failed to upload log file"
-  exit 1
-fi

bin/omarchy-webapp-install

@@ -18,16 +18,13 @@ fi
 
 ICON_DIR="$HOME/.local/share/applications/icons"
 DESKTOP_FILE="$HOME/.local/share/applications/$APP_NAME.desktop"
+ICON_PATH="$ICON_DIR/$APP_NAME.png"
 
-if [[ ! "$ICON_URL" =~ ^https?:// ]] && [ -f "$ICON_URL" ]; then
+mkdir -p "$ICON_DIR"
-  ICON_PATH="$ICON_URL"
+
-else
+if ! curl -sL -o "$ICON_PATH" "$ICON_URL"; then
-  ICON_PATH="$ICON_DIR/$APP_NAME.png"
-  mkdir -p "$ICON_DIR"
-  if ! curl -sL -o "$ICON_PATH" "$ICON_URL"; then
   echo "Error: Failed to download icon."
-    exit 1
+  return 1
-  fi
 fi
 
 cat >"$DESKTOP_FILE" <<EOF

boot.sh

@@ -1,8 +1,5 @@
 #!/bin/bash
 
-# Set install mode to online since boot.sh is used for curl installations
-export OMARCHY_INSTALL_MODE="online"
-
 ansi_art='                 ▄▄▄                                                   
  ▄█████▄    ▄███████████▄    ▄███████   ▄███████   ▄███████   ▄█   █▄    ▄█   █▄ 
 ███   ███  ███   ███   ███  ███   ███  ███   ███  ███   ███  ███   ███  ███   ███

config/hypr/hyprland.conf

@@ -16,5 +16,4 @@ source = ~/.config/hypr/monitors.conf
 source = ~/.config/hypr/input.conf
 source = ~/.config/hypr/bindings.conf
 source = ~/.config/hypr/envs.conf
-source = ~/.config/hypr/looknfeel.conf
 source = ~/.config/hypr/autostart.conf

config/hypr/hyprsunset.conf

@@ -1,6 +1,6 @@
 # Makes hyprsunset do nothing to the screen by default
 # Without this, the default applies some tint to the monitor
 profile {
-    time = 07:00
+    time = 00:00
     identity = true
 }

config/hypr/input.conf

@@ -29,7 +29,3 @@ input {
 
 # Scroll faster in the terminal
 windowrule = scrolltouchpad 1.5, class:Alacritty
-
-# Enable touchpad gestures for changing workspaces
-# See https://wiki.hyprland.org/Configuring/Gestures/
-# gesture = 3, horizontal, workspace

config/hypr/looknfeel.conf

@@ -1,17 +0,0 @@
-# Change the default Omarchy look'n'feel
-
-# https://wiki.hyprland.org/Configuring/Variables/#general
-general {
-    # No gaps between windows
-    # gaps_in = 0
-    # gaps_out = 0
-
-    # Use master layout instead of dwindle
-    # layout = master
-}
-
-# https://wiki.hyprland.org/Configuring/Variables/#decoration
-decoration {
-    # Use round window corners
-    # rounding = 8
-}

config/waybar/config.jsonc

@@ -5,7 +5,7 @@
   "spacing": 0,
   "height": 26,
   "modules-left": ["custom/omarchy", "hyprland/workspaces"],
-  "modules-center": ["clock", "custom/update", "custom/screenrecording-indicator"],
+  "modules-center": ["clock", "custom/update"],
   "modules-right": [
     "group/tray-expander",
     "bluetooth",
@@ -48,7 +48,6 @@
     "exec": "omarchy-update-available",
     "on-click": "omarchy-launch-floating-terminal-with-presentation omarchy-update",
     "tooltip-format": "Omarchy update available",
-    "signal": 7,
     "interval": 3600
   },
 
@@ -125,12 +124,6 @@
     "format": " ",
     "tooltip": false
   },
-  "custom/screenrecording-indicator": {
-    "on-click": "omarchy-cmd-screenrecord",
-    "exec": "$OMARCHY_PATH/default/waybar/indicators/screen-recording.sh",
-    "signal": 8,
-    "return-type": "json"
-  },
   "tray": {
     "icon-size": 12,
     "spacing": 12

config/waybar/style.css

@@ -37,7 +37,6 @@
 #bluetooth,
 #pulseaudio,
 #custom-omarchy,
-#custom-screenrecording-indicator,
 #custom-update {
   min-width: 12px;
   margin: 0 7.5px;
@@ -62,13 +61,3 @@ tooltip {
 .hidden {
   opacity: 0;
 }
-
-#custom-screenrecording-indicator {
-  min-width: 12px;
-  margin-left: 8.75px;
-  font-size: 10px;
-}
-
-#custom-screenrecording-indicator.active {
-  color: #a55555;
-}

default/bash/shell

@@ -10,5 +10,5 @@ if [[ ! -v BASH_COMPLETION_VERSINFO && -f /usr/share/bash-completion/bash_comple
 fi
 
 # Set complete path
-export PATH="$HOME/.local/bin:$PATH"
+export PATH="./bin:$HOME/.local/bin:$PATH"
 set +h

default/hypr/input.conf

@@ -14,3 +14,8 @@ input {
         natural_scroll = false
     }
 }
+
+# https://wiki.hyprland.org/Configuring/Variables/#gestures
+gestures {
+    workspace_swipe = false
+}

default/mako/core.ini

@@ -1,16 +0,0 @@
-anchor=top-right
-default-timeout=5000
-width=420
-height=110
-
-[app-name=Spotify]
-invisible=1
-
-[mode=do-not-disturb]
-invisible=true
-
-[mode=do-not-disturb app-name=notify-send]
-invisible=false
-
-[urgency=critical]
-default-timeout=0

default/pacman/pacman.conf

@@ -22,8 +22,8 @@ Include = /etc/pacman.d/mirrorlist
 [extra]
 Include = /etc/pacman.d/mirrorlist
 
-[multilib]
+# [multilib]
-Include = /etc/pacman.d/mirrorlist
+# Include = /etc/pacman.d/mirrorlist
 
 [omarchy]
 SigLevel = Optional TrustAll

default/plymouth/omarchy.plymouth

@@ -7,5 +7,3 @@ ModuleName=script
 ImageDir=/usr/share/plymouth/themes/omarchy
 ScriptFile=/usr/share/plymouth/themes/omarchy/omarchy.script
 ConsoleLogBackgroundColor=0x1a1b26
-MonospaceFont=Cantarell 11
-Font=Cantarell 11

default/waybar/indicators/screen-recording.sh

@@ -1,7 +0,0 @@
-#!/bin/bash
-
-if pgrep -x wl-screenrec >/dev/null || pgrep -x wf-recorder >/dev/null; then
-  echo '{"text": "󰻂", "tooltip": "Stop recording", "class": "active"}'
-else
-  echo '{"text": ""}'
-fi

install.sh

@@ -1,18 +1,58 @@
 #!/bin/bash
 
 # Exit immediately if a command exits with a non-zero status
-set -eEo pipefail
+set -eE
 
-# Define Omarchy locations
+OMARCHY_PATH="$HOME/.local/share/omarchy"
-export OMARCHY_PATH="$HOME/.local/share/omarchy"
+OMARCHY_INSTALL="$OMARCHY_PATH/install"
-export OMARCHY_INSTALL="$OMARCHY_PATH/install"
-export OMARCHY_INSTALL_LOG_FILE="/var/log/omarchy-install.log"
 export PATH="$OMARCHY_PATH/bin:$PATH"
 
-# Install
+# Preparation
-source "$OMARCHY_INSTALL/helpers/all.sh"
+source $OMARCHY_INSTALL/preflight/show-env.sh
-source "$OMARCHY_INSTALL/preflight/all.sh"
+source $OMARCHY_INSTALL/preflight/trap-errors.sh
-source "$OMARCHY_INSTALL/packaging/all.sh"
+source $OMARCHY_INSTALL/preflight/guard.sh
-source "$OMARCHY_INSTALL/config/all.sh"
+source $OMARCHY_INSTALL/preflight/chroot.sh
-source "$OMARCHY_INSTALL/login/all.sh"
+source $OMARCHY_INSTALL/preflight/pacman.sh
-source "$OMARCHY_INSTALL/post-install/all.sh"
+source $OMARCHY_INSTALL/preflight/migrations.sh
+source $OMARCHY_INSTALL/preflight/first-run-mode.sh
+
+# Packaging
+source $OMARCHY_INSTALL/packages.sh
+source $OMARCHY_INSTALL/packaging/fonts.sh
+source $OMARCHY_INSTALL/packaging/lazyvim.sh
+source $OMARCHY_INSTALL/packaging/webapps.sh
+source $OMARCHY_INSTALL/packaging/tuis.sh
+
+# Configuration
+source $OMARCHY_INSTALL/config/config.sh
+source $OMARCHY_INSTALL/config/theme.sh
+source $OMARCHY_INSTALL/config/branding.sh
+source $OMARCHY_INSTALL/config/git.sh
+source $OMARCHY_INSTALL/config/gpg.sh
+source $OMARCHY_INSTALL/config/timezones.sh
+source $OMARCHY_INSTALL/config/increase-sudo-tries.sh
+source $OMARCHY_INSTALL/config/increase-lockout-limit.sh
+source $OMARCHY_INSTALL/config/ssh-flakiness.sh
+source $OMARCHY_INSTALL/config/detect-keyboard-layout.sh
+source $OMARCHY_INSTALL/config/xcompose.sh
+source $OMARCHY_INSTALL/config/mise-ruby.sh
+source $OMARCHY_INSTALL/config/docker.sh
+source $OMARCHY_INSTALL/config/mimetypes.sh
+source $OMARCHY_INSTALL/config/localdb.sh
+source $OMARCHY_INSTALL/config/sudoless-asdcontrol.sh
+source $OMARCHY_INSTALL/config/hardware/network.sh
+source $OMARCHY_INSTALL/config/hardware/fix-fkeys.sh
+source $OMARCHY_INSTALL/config/hardware/bluetooth.sh
+source $OMARCHY_INSTALL/config/hardware/printer.sh
+source $OMARCHY_INSTALL/config/hardware/usb-autosuspend.sh
+source $OMARCHY_INSTALL/config/hardware/ignore-power-button.sh
+source $OMARCHY_INSTALL/config/hardware/nvidia.sh
+source $OMARCHY_INSTALL/config/hardware/fix-f13-amd-audio-input.sh
+
+# Login
+source $OMARCHY_INSTALL/login/plymouth.sh
+source $OMARCHY_INSTALL/login/limine-snapper.sh
+source $OMARCHY_INSTALL/login/alt-bootloaders.sh
+
+# Finishing
+source $OMARCHY_INSTALL/reboot.sh

install/config/all.sh

@@ -1,27 +0,0 @@
-run_logged $OMARCHY_INSTALL/config/config.sh
-run_logged $OMARCHY_INSTALL/config/theme.sh
-run_logged $OMARCHY_INSTALL/config/branding.sh
-run_logged $OMARCHY_INSTALL/config/git.sh
-run_logged $OMARCHY_INSTALL/config/gpg.sh
-run_logged $OMARCHY_INSTALL/config/timezones.sh
-run_logged $OMARCHY_INSTALL/config/increase-sudo-tries.sh
-run_logged $OMARCHY_INSTALL/config/increase-lockout-limit.sh
-run_logged $OMARCHY_INSTALL/config/ssh-flakiness.sh
-run_logged $OMARCHY_INSTALL/config/detect-keyboard-layout.sh
-run_logged $OMARCHY_INSTALL/config/xcompose.sh
-run_logged $OMARCHY_INSTALL/config/mise-ruby.sh
-run_logged $OMARCHY_INSTALL/config/mise-work.sh
-run_logged $OMARCHY_INSTALL/config/docker.sh
-run_logged $OMARCHY_INSTALL/config/mimetypes.sh
-run_logged $OMARCHY_INSTALL/config/localdb.sh
-run_logged $OMARCHY_INSTALL/config/sudoless-asdcontrol.sh
-run_logged $OMARCHY_INSTALL/config/hardware/network.sh
-run_logged $OMARCHY_INSTALL/config/hardware/set-wireless-regdom.sh
-run_logged $OMARCHY_INSTALL/config/hardware/fix-fkeys.sh
-run_logged $OMARCHY_INSTALL/config/hardware/bluetooth.sh
-run_logged $OMARCHY_INSTALL/config/hardware/printer.sh
-run_logged $OMARCHY_INSTALL/config/hardware/usb-autosuspend.sh
-run_logged $OMARCHY_INSTALL/config/hardware/ignore-power-button.sh
-run_logged $OMARCHY_INSTALL/config/hardware/nvidia.sh
-run_logged $OMARCHY_INSTALL/config/hardware/fix-f13-amd-audio-input.sh
-run_logged $OMARCHY_INSTALL/config/hardware/fix-apple-bcm4360.sh

install/config/branding.sh

@@ -1,3 +1,5 @@
+#!/bin/bash
+
 # Allow the user to change the branding for fastfetch and screensaver
 mkdir -p ~/.config/omarchy/branding
 cp ~/.local/share/omarchy/icon.txt ~/.config/omarchy/branding/about.txt

install/config/config.sh

@@ -1,3 +1,5 @@
+#!/bin/bash
+
 # Copy over Omarchy configs
 mkdir -p ~/.config
 cp -R ~/.local/share/omarchy/config/* ~/.config/

install/config/detect-keyboard-layout.sh

@@ -1,13 +1,16 @@
+#!/bin/bash
+
 # Copy over the keyboard layout that's been set in Arch during install to Hyprland
 conf="/etc/vconsole.conf"
 hyprconf="$HOME/.config/hypr/input.conf"
 
-if grep -q '^XKBLAYOUT=' "$conf"; then
+layout=$(grep '^XKBLAYOUT=' "$conf" | cut -d= -f2 | tr -d '"')
-  layout=$(grep '^XKBLAYOUT=' "$conf" | cut -d= -f2 | tr -d '"')
+variant=$(grep '^XKBVARIANT=' "$conf" | cut -d= -f2 | tr -d '"')
+
+if [[ -n "$layout" ]]; then
   sed -i "/^[[:space:]]*kb_options *=/i\  kb_layout = $layout" "$hyprconf"
 fi
 
-if grep -q '^XKBVARIANT=' "$conf"; then
+if [[ -n "$variant" ]]; then
-  variant=$(grep '^XKBVARIANT=' "$conf" | cut -d= -f2 | tr -d '"')
   sed -i "/^[[:space:]]*kb_options *=/i\  kb_variant = $variant" "$hyprconf"
 fi

install/config/docker.sh

@@ -1,3 +1,5 @@
+#!/bin/bash
+
 # Configure Docker daemon:
 # - limit log size to avoid running out of disk
 # - use host's DNS resolver

install/config/git.sh

@@ -1,3 +1,5 @@
+#!/bin/bash
+
 # Ensure git settings live under ~/.config
 mkdir -p ~/.config/git
 touch ~/.config/git/config

install/config/gpg.sh

@@ -1,3 +1,5 @@
+#!/bin/bash
+
 # Setup GPG configuration with multiple keyservers for better reliability
 sudo mkdir -p /etc/gnupg
 sudo cp ~/.local/share/omarchy/default/gpg/dirmngr.conf /etc/gnupg/

install/config/hardware/bluetooth.sh

@@ -1,2 +1,4 @@
+#!/bin/bash
+
 # Turn on bluetooth by default
 chrootable_systemctl_enable bluetooth.service

install/config/hardware/fix-apple-bcm4360.sh

@@ -1,5 +0,0 @@
-# Install wifi drivers for 2013-2015 MacBooks using the BCM4360 chip
-if lspci -nnv | grep -A2 "14e4:43a0" | grep -q "106b:"; then
-  echo "Apple BCM4360 detected"
-  sudo pacman -S --noconfirm --needed broadcom-wl dkms linux-headers
-fi

install/config/hardware/fix-f13-amd-audio-input.sh

@@ -1,4 +1,6 @@
-AMD_AUDIO_CARD=$(pactl list cards 2>/dev/null | grep -B20 "Family 17h/19h" | grep "Name: " | awk '{print $2}' || true)
+#!/bin/bash
+
+AMD_AUDIO_CARD=$(pactl list cards | grep -B20 "Family 17h/19h" | grep "Name: " | awk '{print $2}')
 
 if [[ -n $AMD_AUDIO_CARD ]]; then
   pactl set-card-profile "$AMD_AUDIO_CARD" "HiFi (Mic1, Mic2, Speaker)" 2>/dev/null || true

install/config/hardware/fix-fkeys.sh

@@ -1,3 +1,5 @@
+#!/bin/bash
+
 # Ensure that F-keys on Apple-like keyboards (such as Lofree Flow84) are always F-keys
 if [[ ! -f /etc/modprobe.d/hid_apple.conf ]]; then
   echo "options hid_apple fnmode=2" | sudo tee /etc/modprobe.d/hid_apple.conf

install/config/hardware/ignore-power-button.sh

@@ -1,2 +1,5 @@
+#!/bin/bash
+
 # Disable shutting system down on power button to bind it to power menu afterwards
 sudo sed -i 's/.*HandlePowerKey=.*/HandlePowerKey=ignore/' /etc/systemd/logind.conf
+

install/config/hardware/intel.sh

@@ -1,11 +0,0 @@
-# This installs hardware video acceleration for Intel GPUs
-# Check if we have an Intel GPU at all
-if INTEL_GPU=$(lspci | grep -iE 'vga|3d|display' | grep -i 'intel'); then
-  # HD Graphics and newer uses intel-media-driver
-  if [[ "${INTEL_GPU,,}" =~ "hd graphics"|"xe"|"iris" ]]; then
-    sudo pacman -S --needed --noconfirm intel-media-driver
-  elif [[ "${INTEL_GPU,,}" =~ "gma" ]]; then
-    # Older generations from 2008 to ~2014-2017 use libva-intel-driver
-    sudo pacman -S --needed --noconfirm libva-intel-driver
-  fi
-fi

install/config/hardware/network.sh

@@ -1,3 +1,5 @@
+#!/bin/bash
+
 # Ensure iwd service will be started
 sudo systemctl enable iwd.service
 

install/config/hardware/nvidia.sh

@@ -1,3 +1,5 @@
+#!/bin/bash
+
 # ==============================================================================
 # Hyprland NVIDIA Setup Script for Arch Linux
 # ==============================================================================
@@ -28,6 +30,11 @@ if [ -n "$(lspci | grep -i 'nvidia')" ]; then
     KERNEL_HEADERS="linux-hardened-headers"
   fi
 
+  # Enable multilib repository for 32-bit libraries
+  if ! grep -q "^\[multilib\]" /etc/pacman.conf; then
+    sudo sed -i '/^#\s*\[multilib\]/,/^#\s*Include/ s/^#\s*//' /etc/pacman.conf
+  fi
+
   # force package database refresh
   sudo pacman -Syu --noconfirm
 

install/config/hardware/printer.sh

@@ -1,3 +1,5 @@
+#!/bin/bash
+
 chrootable_systemctl_enable cups.service
 
 # Disable multicast dns in resolved. Avahi will provide this for better network printer discovery
@@ -5,9 +7,6 @@ sudo mkdir -p /etc/systemd/resolved.conf.d
 echo -e "[Resolve]\nMulticastDNS=no" | sudo tee /etc/systemd/resolved.conf.d/10-disable-multicast.conf
 chrootable_systemctl_enable avahi-daemon.service
 
-# Enable mDNS resolution for .local domains
-sudo sed -i 's/^hosts:.*/hosts: mymachines mdns_minimal [NOTFOUND=return] resolve [!UNAVAIL=return] files myhostname dns/' /etc/nsswitch.conf
-
 # Enable automatically adding remote printers
 if ! grep -q '^CreateRemotePrinters Yes' /etc/cups/cups-browsed.conf; then
   echo 'CreateRemotePrinters Yes' | sudo tee -a /etc/cups/cups-browsed.conf

install/config/hardware/set-wireless-regdom.sh

@@ -1,33 +0,0 @@
-# First check that wireless-regdb is there
-if [ -f "/etc/conf.d/wireless-regdom" ]; then
-  unset WIRELESS_REGDOM
-  . /etc/conf.d/wireless-regdom
-fi
-
-# If the region is already set, we're done
-if [ ! -n "${WIRELESS_REGDOM}" ]; then
-  # Get the current timezone
-  if [ -e "/etc/localtime" ]; then
-    TIMEZONE=$(readlink -f /etc/localtime)
-    TIMEZONE=${TIMEZONE#/usr/share/zoneinfo/}
-
-    # Some timezones are formatted with the two letter country code at the start
-    COUNTRY="${TIMEZONE%%/*}"
-
-    # If we don't have a two letter country, get it from the timezone table
-    if [[ ! "$COUNTRY" =~ ^[A-Z]{2}$ ]] && [ -f "/usr/share/zoneinfo/zone.tab" ]; then
-      COUNTRY=$(awk -v tz="$TIMEZONE" '$3 == tz {print $1; exit}' /usr/share/zoneinfo/zone.tab)
-    fi
-
-    # Check if we have a two letter country code
-    if [[ "$COUNTRY" =~ ^[A-Z]{2}$ ]]; then
-      # Append it to the wireless-regdom conf file that is used at boot
-      echo "WIRELESS_REGDOM=\"$COUNTRY\"" | sudo tee -a /etc/conf.d/wireless-regdom >/dev/null
-
-      # Also set it one off now
-      if command -v iw &>/dev/null; then
-        sudo iw reg set ${COUNTRY}
-      fi
-    fi
-  fi
-fi

install/config/hardware/usb-autosuspend.sh

@@ -1,5 +1,6 @@
+#!/bin/bash
+
 # Disable USB autosuspend to prevent peripheral disconnection issues
 if [[ ! -f /etc/modprobe.d/disable-usb-autosuspend.conf ]]; then
   echo "options usbcore autosuspend=-1" | sudo tee /etc/modprobe.d/disable-usb-autosuspend.conf
 fi
-

install/config/increase-lockout-limit.sh

@@ -1,3 +1,5 @@
+#!/bin/bash
+
 # Increase lockout limit to 10 and decrease timeout to 2 minutes
 sudo sed -i 's|^\(auth\s\+required\s\+pam_faillock.so\)\s\+preauth.*$|\1 preauth silent deny=10 unlock_time=120|' "/etc/pam.d/system-auth"
 sudo sed -i 's|^\(auth\s\+\[default=die\]\s\+pam_faillock.so\)\s\+authfail.*$|\1 authfail deny=10 unlock_time=120|' "/etc/pam.d/system-auth"

install/config/increase-sudo-tries.sh

@@ -1,3 +1,5 @@
+#!/bin/bash
+
 # Give the user 10 instead of 3 tries to fat finger their password before lockout
 echo "Defaults passwd_tries=10" | sudo tee /etc/sudoers.d/passwd-tries
 sudo chmod 440 /etc/sudoers.d/passwd-tries

install/config/lazyvim.sh

@@ -1 +0,0 @@
-omarchy-lazyvim-setup

install/config/mimetypes.sh

@@ -1,3 +1,5 @@
+#!/bin/bash
+
 omarchy-refresh-applications
 update-desktop-database ~/.local/share/applications
 

install/config/mise-ruby.sh

@@ -1,26 +1,7 @@
+#!/bin/bash
+
 # Install Ruby using gcc-14 for compatibility
 mise settings set ruby.ruby_build_opts "CC=gcc-14 CXX=g++-14"
 
 # Trust .ruby-version
 mise settings add idiomatic_version_file_enable_tools ruby
-
-# Install pre-built Ruby + Rails for x86_64
-if [[ $(uname -m) == "x86_64" ]]; then
-  RUBY_VERSION="3.4.5"
-  RUBY_TARBALL="ruby-${RUBY_VERSION}-rails-8.0.2.1-x86_64.tar.gz"
-  RUBY_URL="https://pkgs.omarchy.org/ruby/${RUBY_TARBALL}"
-  MISE_RUBY_DIR="$HOME/.local/share/mise/installs/ruby"
-  OFFLINE_CACHE="/var/cache/omarchy/ruby"
-
-  mkdir -p "$MISE_RUBY_DIR"
-
-  if [[ ${OMARCHY_INSTALL_MODE:-offline} == "offline" ]]; then
-    echo "Installing Ruby from offline cache..."
-    tar -xzf "${OFFLINE_CACHE}/${RUBY_TARBALL}" -C "$MISE_RUBY_DIR"
-  else
-    echo "Downloading pre-built Ruby ${RUBY_VERSION}..."
-    curl -fsSL "$RUBY_URL" | tar -xz -C "$MISE_RUBY_DIR"
-  fi
-
-  mise use --global "ruby@${RUBY_VERSION}"
-fi

install/config/mise-work.sh

@@ -1,9 +0,0 @@
-# Add ./bin to path for all items in ~/Work
-mkdir -p "$HOME/Work"
-
-cat >"$HOME/Work/.mise.toml" <<'EOF'
-[env]
-_.path = "{{ cwd }}/bin"
-EOF
-
-mise trust ~/Work/.mise.toml

install/config/ssh-flakiness.sh

@@ -1,2 +1,4 @@
+#!/bin/bash
+
 # Solve common flakiness with SSH
 echo "net.ipv4.tcp_mtu_probing=1" | sudo tee -a /etc/sysctl.d/99-sysctl.conf

install/config/sudoless-asdcontrol.sh

@@ -1,3 +1,5 @@
+#!/bin/bash
+
 # Setup sudo-less controls for controlling brightness on Apple Displays
 echo "$USER ALL=(ALL) NOPASSWD: /usr/local/bin/asdcontrol" | sudo tee /etc/sudoers.d/asdcontrol
 sudo chmod 440 /etc/sudoers.d/asdcontrol

install/config/theme.sh

@@ -1,6 +1,13 @@
+#!/bin/bash
+
+gsettings set org.gnome.desktop.interface gtk-theme "Adwaita-dark"
+gsettings set org.gnome.desktop.interface color-scheme "prefer-dark"
+gsettings set org.gnome.desktop.interface icon-theme "Yaru-blue"
+
 # Set links for Nautilius action icons
 sudo ln -snf /usr/share/icons/Adwaita/symbolic/actions/go-previous-symbolic.svg /usr/share/icons/Yaru/scalable/actions/go-previous-symbolic.svg
 sudo ln -snf /usr/share/icons/Adwaita/symbolic/actions/go-next-symbolic.svg /usr/share/icons/Yaru/scalable/actions/go-next-symbolic.svg
+sudo gtk-update-icon-cache /usr/share/icons/Yaru
 
 # Setup theme links
 mkdir -p ~/.config/omarchy/themes

install/config/timezones.sh

@@ -1,3 +1,5 @@
+#!/bin/bash
+
 # Ensure timezone can be updated without needing to sudo
 sudo tee /etc/sudoers.d/omarchy-tzupdate >/dev/null <<EOF
 %wheel ALL=(root) NOPASSWD: /usr/bin/tzupdate, /usr/bin/timedatectl

install/config/xcompose.sh

@@ -1,3 +1,5 @@
+#!/bin/bash
+
 # Set default XCompose that is triggered with CapsLock
 tee ~/.XCompose >/dev/null <<EOF
 include "%H/.local/share/omarchy/default/xcompose"

install/first-run/battery-monitor.sh

@@ -1,3 +1,5 @@
+#!/bin/bash
+
 if ls /sys/class/power_supply/BAT* &>/dev/null; then
   # This computer runs on a battery
   powerprofilesctl set balanced || true

install/first-run/firewall.sh

@@ -1,3 +1,5 @@
+#!/bin/bash
+
 # Allow nothing in, everything out
 sudo ufw default deny incoming
 sudo ufw default allow outgoing

install/first-run/gnome-theme.sh

@@ -1,5 +0,0 @@
-gsettings set org.gnome.desktop.interface gtk-theme "Adwaita-dark"
-gsettings set org.gnome.desktop.interface color-scheme "prefer-dark"
-gsettings set org.gnome.desktop.interface icon-theme "Yaru-blue"
-
-sudo gtk-update-icon-cache /usr/share/icons/Yaru

install/helpers/all.sh

@@ -1,4 +0,0 @@
-source $OMARCHY_INSTALL/helpers/chroot.sh
-source $OMARCHY_INSTALL/helpers/presentation.sh
-source $OMARCHY_INSTALL/helpers/errors.sh
-source $OMARCHY_INSTALL/helpers/logging.sh

install/helpers/errors.sh

@@ -1,159 +0,0 @@
-# Directs user to Omarchy Discord
-QR_CODE='
-█▀▀▀▀▀█ ▄ ▄ ▀▄▄▄█ █▀▀▀▀▀█
-█ ███ █ ▄▄▄▄▀▄▀▄▀ █ ███ █
-█ ▀▀▀ █ ▄█  ▄█▄▄▀ █ ▀▀▀ █
-▀▀▀▀▀▀▀ ▀▄█ █ █ █ ▀▀▀▀▀▀▀
-▀▀█▀▀▄▀▀▀▀▄█▀▀█  ▀ █ ▀ █ 
-█▄█ ▄▄▀▄▄ ▀ ▄ ▀█▄▄▄▄ ▀ ▀█
-▄ ▄▀█ ▀▄▀▀▀▄ ▄█▀▄█▀▄▀▄▀█▀
-█ ▄▄█▄▀▄█ ▄▄▄  ▀ ▄▀██▀ ▀█
-▀ ▀   ▀ █ ▀▄  ▀▀█▀▀▀█▄▀  
-█▀▀▀▀▀█ ▀█  ▄▀▀ █ ▀ █▄▀██
-█ ███ █ █▀▄▄▀ █▀███▀█▄██▄
-█ ▀▀▀ █ ██  ▀ █▄█ ▄▄▄█▀ █
-▀▀▀▀▀▀▀ ▀ ▀ ▀▀▀  ▀ ▀▀▀▀▀▀'
-
-# Track if we're already handling an error to prevent double-trapping
-ERROR_HANDLING=false
-
-# Cursor is usually hidden while we install
-show_cursor() {
-  printf "\033[?25h"
-}
-
-# Display truncated log lines from the install log
-show_log_tail() {
-  if [[ -f $OMARCHY_INSTALL_LOG_FILE ]]; then
-    local log_lines=$(($TERM_HEIGHT - $LOGO_HEIGHT - 35))
-    local max_line_width=$((LOGO_WIDTH - 4))
-
-    tail -n $log_lines "$OMARCHY_INSTALL_LOG_FILE" | while IFS= read -r line; do
-      if ((${#line} > max_line_width)); then
-        local truncated_line="${line:0:$max_line_width}..."
-      else
-        local truncated_line="$line"
-      fi
-
-      gum style "$truncated_line"
-    done
-
-    echo
-  fi
-}
-
-# Display the failed command or script name
-show_failed_script_or_command() {
-  if [[ -n ${CURRENT_SCRIPT:-} ]]; then
-    gum style "Failed script: $CURRENT_SCRIPT"
-  else
-    # Truncate long command lines to fit the display
-    local cmd="$BASH_COMMAND"
-    local max_cmd_width=$((LOGO_WIDTH - 4))
-
-    if ((${#cmd} > max_cmd_width)); then
-      cmd="${cmd:0:$max_cmd_width}..."
-    fi
-
-    gum style "$cmd"
-  fi
-}
-
-# Save original stdout and stderr for trap to use
-save_original_outputs() {
-  exec 3>&1 4>&2
-}
-
-# Restore stdout and stderr to original (saved in FD 3 and 4)
-# This ensures output goes to screen, not log file
-restore_outputs() {
-  if [ -e /proc/self/fd/3 ] && [ -e /proc/self/fd/4 ]; then
-    exec 1>&3 2>&4
-  fi
-}
-
-# Error handler
-catch_errors() {
-  # Prevent recursive error handling
-  if [[ $ERROR_HANDLING == true ]]; then
-    return
-  else
-    ERROR_HANDLING=true
-  fi
-
-  # Store exit code immediately before it gets overwritten
-  local exit_code=$?
-
-  stop_log_output
-  restore_outputs
-
-  clear_logo
-  show_cursor
-
-  gum style --foreground 1 --padding "1 0 1 $PADDING_LEFT" "Omarchy installation stopped!"
-  show_log_tail
-
-  gum style "This command halted with exit code $exit_code:"
-  show_failed_script_or_command
-
-  gum style "$QR_CODE"
-  echo
-  gum style "Get help from the community via QR code or at https://discord.gg/tXFUdasqhY"
-
-  # Offer options menu
-  while true; do
-    options=()
-
-    # If online install, show retry first
-    if [[ ${OMARCHY_INSTALL_MODE:-offline} == "online" ]]; then
-      options+=("Retry installation")
-    fi
-
-    # Add upload option if internet is available
-    if ping -c 1 -W 1 1.1.1.1 >/dev/null 2>&1; then
-      options+=("Upload log for support")
-    fi
-
-    # Add remaining options
-    options+=("View full log")
-    options+=("Exit")
-
-    choice=$(gum choose "${options[@]}" --header "What would you like to do?" --height 6 --padding "1 $PADDING_LEFT")
-
-    case "$choice" in
-    "Retry installation")
-      bash ~/.local/share/omarchy/install.sh
-      break
-      ;;
-    "View full log")
-      less "$OMARCHY_INSTALL_LOG_FILE"
-      ;;
-    "Upload log for support")
-      omarchy-upload-install-log
-      ;;
-    "Exit" | "")
-      exit 1
-      ;;
-    esac
-  done
-}
-
-# Exit handler - ensures cleanup happens on any exit
-exit_handler() {
-  local exit_code=$?
-
-  # Only run if we're exiting with an error and haven't already handled it
-  if [[ $exit_code -ne 0 && $ERROR_HANDLING != true ]]; then
-    catch_errors
-  else
-    stop_log_output
-    show_cursor
-  fi
-}
-
-# Set up traps
-trap catch_errors ERR INT TERM
-trap exit_handler EXIT
-
-# Save original outputs in case we trap
-save_original_outputs

install/helpers/logging.sh

@@ -1,134 +0,0 @@
-start_log_output() {
-  local ANSI_SAVE_CURSOR="\033[s"
-  local ANSI_RESTORE_CURSOR="\033[u"
-  local ANSI_CLEAR_LINE="\033[2K"
-  local ANSI_HIDE_CURSOR="\033[?25l"
-  local ANSI_RESET="\033[0m"
-  local ANSI_GRAY="\033[90m"
-
-  # Save cursor position and hide cursor
-  printf $ANSI_SAVE_CURSOR
-  printf $ANSI_HIDE_CURSOR
-
-  (
-    local log_lines=20
-    local max_line_width=$((LOGO_WIDTH - 4))
-
-    while true; do
-      # Read the last N lines into an array
-      mapfile -t current_lines < <(tail -n $log_lines "$OMARCHY_INSTALL_LOG_FILE" 2>/dev/null)
-
-      # Build complete output buffer with escape sequences
-      output=""
-      for ((i = 0; i < log_lines; i++)); do
-        line="${current_lines[i]:-}"
-
-        # Truncate if needed
-        if [ ${#line} -gt $max_line_width ]; then
-          line="${line:0:$max_line_width}..."
-        fi
-
-        # Add clear line escape and formatted output for each line
-        if [ -n "$line" ]; then
-          output+="${ANSI_CLEAR_LINE}${ANSI_GRAY}${PADDING_LEFT_SPACES}  → ${line}${ANSI_RESET}\n"
-        else
-          output+="${ANSI_CLEAR_LINE}${PADDING_LEFT_SPACES}\n"
-        fi
-      done
-
-      printf "${ANSI_RESTORE_CURSOR}%b" "$output"
-
-      sleep 0.1
-    done
-  ) &
-  monitor_pid=$!
-}
-
-stop_log_output() {
-  if [ -n "${monitor_pid:-}" ]; then
-    kill $monitor_pid 2>/dev/null || true
-    wait $monitor_pid 2>/dev/null || true
-    unset monitor_pid
-  fi
-}
-
-start_install_log() {
-  sudo touch "$OMARCHY_INSTALL_LOG_FILE"
-  sudo chmod 666 "$OMARCHY_INSTALL_LOG_FILE"
-
-  export OMARCHY_START_TIME=$(date '+%Y-%m-%d %H:%M:%S')
-
-  echo "=== Omarchy Installation Started: $OMARCHY_START_TIME ===" >>"$OMARCHY_INSTALL_LOG_FILE"
-  start_log_output
-}
-
-stop_install_log() {
-  stop_log_output
-  show_cursor
-
-  if [[ -n ${OMARCHY_INSTALL_LOG_FILE:-} ]]; then
-    OMARCHY_END_TIME=$(date '+%Y-%m-%d %H:%M:%S')
-    echo "=== Omarchy Installation Completed: $OMARCHY_END_TIME ===" >>"$OMARCHY_INSTALL_LOG_FILE"
-    echo "" >>"$OMARCHY_INSTALL_LOG_FILE"
-    echo "=== Installation Time Summary ===" >>"$OMARCHY_INSTALL_LOG_FILE"
-
-    if [ -f "/var/log/archinstall/install.log" ]; then
-      ARCHINSTALL_START=$(grep -m1 '^\[' /var/log/archinstall/install.log 2>/dev/null | sed 's/^\[\([^]]*\)\].*/\1/' || true)
-      ARCHINSTALL_END=$(grep 'Installation completed without any errors' /var/log/archinstall/install.log 2>/dev/null | sed 's/^\[\([^]]*\)\].*/\1/' || true)
-
-      if [ -n "$ARCHINSTALL_START" ] && [ -n "$ARCHINSTALL_END" ]; then
-        ARCH_START_EPOCH=$(date -d "$ARCHINSTALL_START" +%s)
-        ARCH_END_EPOCH=$(date -d "$ARCHINSTALL_END" +%s)
-        ARCH_DURATION=$((ARCH_END_EPOCH - ARCH_START_EPOCH))
-
-        ARCH_MINS=$((ARCH_DURATION / 60))
-        ARCH_SECS=$((ARCH_DURATION % 60))
-
-        echo "Archinstall: ${ARCH_MINS}m ${ARCH_SECS}s" >>"$OMARCHY_INSTALL_LOG_FILE"
-      fi
-    fi
-
-    if [ -n "$OMARCHY_START_TIME" ]; then
-      OMARCHY_START_EPOCH=$(date -d "$OMARCHY_START_TIME" +%s)
-      OMARCHY_END_EPOCH=$(date -d "$OMARCHY_END_TIME" +%s)
-      OMARCHY_DURATION=$((OMARCHY_END_EPOCH - OMARCHY_START_EPOCH))
-
-      OMARCHY_MINS=$((OMARCHY_DURATION / 60))
-      OMARCHY_SECS=$((OMARCHY_DURATION % 60))
-
-      echo "Omarchy:     ${OMARCHY_MINS}m ${OMARCHY_SECS}s" >>"$OMARCHY_INSTALL_LOG_FILE"
-
-      if [ -n "$ARCH_DURATION" ]; then
-        TOTAL_DURATION=$((ARCH_DURATION + OMARCHY_DURATION))
-        TOTAL_MINS=$((TOTAL_DURATION / 60))
-        TOTAL_SECS=$((TOTAL_DURATION % 60))
-        echo "Total:       ${TOTAL_MINS}m ${TOTAL_SECS}s" >>"$OMARCHY_INSTALL_LOG_FILE"
-      fi
-    fi
-    echo "=================================" >>"$OMARCHY_INSTALL_LOG_FILE"
-
-    echo "Rebooting system..." >>"$OMARCHY_INSTALL_LOG_FILE"
-  fi
-}
-
-run_logged() {
-  local script="$1"
-
-  export CURRENT_SCRIPT="$script"
-
-  echo "[$(date '+%Y-%m-%d %H:%M:%S')] Starting: $script" >>"$OMARCHY_INSTALL_LOG_FILE"
-
-  # Use bash -c to create a clean subshell
-  bash -c "source '$script'" </dev/null >>"$OMARCHY_INSTALL_LOG_FILE" 2>&1
-
-  local exit_code=$?
-
-  if [ $exit_code -eq 0 ]; then
-    echo "[$(date '+%Y-%m-%d %H:%M:%S')] Completed: $script" >>"$OMARCHY_INSTALL_LOG_FILE"
-    unset CURRENT_SCRIPT
-  else
-    echo "[$(date '+%Y-%m-%d %H:%M:%S')] Failed: $script (exit code: $exit_code)" >>"$OMARCHY_INSTALL_LOG_FILE"
-  fi
-
-  return $exit_code
-}

install/helpers/presentation.sh

@@ -1,48 +0,0 @@
-# Ensure we have gum available
-if ! command -v gum &>/dev/null; then
-  sudo pacman -S --needed --noconfirm gum
-fi
-
-# Get terminal size from /dev/tty (works in all scenarios: direct, sourced, or piped)
-if [ -e /dev/tty ]; then
-  TERM_SIZE=$(stty size 2>/dev/null </dev/tty)
-
-  if [ -n "$TERM_SIZE" ]; then
-    export TERM_HEIGHT=$(echo "$TERM_SIZE" | cut -d' ' -f1)
-    export TERM_WIDTH=$(echo "$TERM_SIZE" | cut -d' ' -f2)
-  else
-    # Fallback to reasonable defaults if stty fails
-    export TERM_WIDTH=80
-    export TERM_HEIGHT=24
-  fi
-else
-  # No terminal available (e.g., non-interactive environment)
-  export TERM_WIDTH=80
-  export TERM_HEIGHT=24
-fi
-
-export LOGO_PATH="$OMARCHY_PATH/logo.txt"
-export LOGO_WIDTH=$(awk '{ if (length > max) max = length } END { print max+0 }' "$LOGO_PATH" 2>/dev/null || echo 0)
-export LOGO_HEIGHT=$(wc -l <"$LOGO_PATH" 2>/dev/null || echo 0)
-
-export PADDING_LEFT=$((($TERM_WIDTH - $LOGO_WIDTH) / 2))
-export PADDING_LEFT_SPACES=$(printf "%*s" $PADDING_LEFT "")
-
-# Tokyo Night theme for gum confirm
-export GUM_CONFIRM_PROMPT_FOREGROUND="6"     # Cyan for prompt
-export GUM_CONFIRM_SELECTED_FOREGROUND="0"   # Black text on selected
-export GUM_CONFIRM_SELECTED_BACKGROUND="2"   # Green background for selected
-export GUM_CONFIRM_UNSELECTED_FOREGROUND="7" # White for unselected
-export GUM_CONFIRM_UNSELECTED_BACKGROUND="0" # Black background for unselected
-export PADDING="0 0 0 $PADDING_LEFT"         # Gum Style
-export GUM_CHOOSE_PADDING="$PADDING"
-export GUM_FILTER_PADDING="$PADDING"
-export GUM_INPUT_PADDING="$PADDING"
-export GUM_SPIN_PADDING="$PADDING"
-export GUM_TABLE_PADDING="$PADDING"
-export GUM_CONFIRM_PADDING="$PADDING"
-
-clear_logo() {
-  printf "\033[H\033[2J" # Clear screen and move cursor to top-left
-  gum style --foreground 2 --padding "1 0 0 $PADDING_LEFT" "$(<"$LOGO_PATH")"
-}

install/iso.sh

@@ -1,14 +0,0 @@
-# Called by Omarchy ISO setup before starting configurator and archinstall
-
-source "$OMARCHY_INSTALL/preflight/set-size-vars.sh"
-source "$OMARCHY_INSTALL/helpers/logo.sh"
-source "$OMARCHY_INSTALL/preflight/gum.sh"
-source "$OMARCHY_INSTALL/helpers/tail-log-output.sh"
-source "$OMARCHY_INSTALL/helpers/trap-errors.sh"
-
-source $OMARCHY_INSTALL/helpers/chroot.sh
-source $OMARCHY_INSTALL/helpers/logo.sh
-source $OMARCHY_INSTALL/helpers/gum.sh
-source $OMARCHY_INSTALL/helpers/errors.sh
-source $OMARCHY_INSTALL/helpers/logging.sh
-source $OMARCHY_INSTALL/helpers/layout.sh

install/login/all.sh

@@ -1,4 +0,0 @@
-run_logged $OMARCHY_INSTALL/login/plymouth.sh
-run_logged $OMARCHY_INSTALL/login/limine-snapper.sh
-run_logged $OMARCHY_INSTALL/login/enable-mkinitcpio.sh
-run_logged $OMARCHY_INSTALL/login/alt-bootloaders.sh

install/login/alt-bootloaders.sh

@@ -1,3 +1,5 @@
+#!/bin/bash
+
 if ! command -v limine &>/dev/null; then
   # Add kernel hooks
   if ! grep -Eq '^HOOKS=.*plymouth' /etc/mkinitcpio.conf; then

install/login/enable-mkinitcpio.sh

@@ -1,18 +0,0 @@
-echo "Re-enabling mkinitcpio hooks..."
-
-# Restore the specific mkinitcpio pacman hooks
-if [ -f /usr/share/libalpm/hooks/90-mkinitcpio-install.hook.disabled ]; then
-  sudo mv /usr/share/libalpm/hooks/90-mkinitcpio-install.hook.disabled /usr/share/libalpm/hooks/90-mkinitcpio-install.hook
-fi
-
-if [ -f /usr/share/libalpm/hooks/60-mkinitcpio-remove.hook.disabled ]; then
-  sudo mv /usr/share/libalpm/hooks/60-mkinitcpio-remove.hook.disabled /usr/share/libalpm/hooks/60-mkinitcpio-remove.hook
-fi
-
-echo "mkinitcpio hooks re-enabled"
-
-if command -v limine &>/dev/null; then
-  sudo limine-update
-else
-  sudo mkinitcpio -P
-fi

install/login/limine-snapper.sh

@@ -1,27 +1,14 @@
+#!/bin/bash
+
 if command -v limine &>/dev/null; then
   sudo tee /etc/mkinitcpio.conf.d/omarchy_hooks.conf <<EOF >/dev/null
 HOOKS=(base udev plymouth keyboard autodetect microcode modconf kms keymap consolefont block encrypt filesystems fsck btrfs-overlayfs)
 EOF
 
-  [[ -f /boot/EFI/limine/limine.conf ]] || [[ -f /boot/EFI/BOOT/limine.conf ]] && EFI=true
+  [[ -f /boot/EFI/limine/limine.conf ]] && EFI=true
 
   # Conf location is different between EFI and BIOS
-  if [[ -n "$EFI" ]]; then
+  [[ -n "$EFI" ]] && limine_config="/boot/EFI/limine/limine.conf" || limine_config="/boot/limine/limine.conf"
-    # Check USB location first, then regular EFI location
-    if [[ -f /boot/EFI/BOOT/limine.conf ]]; then
-      limine_config="/boot/EFI/BOOT/limine.conf"
-    else
-      limine_config="/boot/EFI/limine/limine.conf"
-    fi
-  else
-    limine_config="/boot/limine/limine.conf"
-  fi
-
-  # Double-check and exit if we don't have a config file for some reason
-  if [[ ! -f $limine_config ]]; then
-    echo "Error: Limine config not found at $limine_config" >&2
-    exit 1
-  fi
 
   CMDLINE=$(grep "^[[:space:]]*cmdline:" "$limine_config" | head -1 | sed 's/^[[:space:]]*cmdline:[[:space:]]*//')
 
@@ -76,9 +63,10 @@ term_background_bright: 24283b
 EOF
 
   sudo pacman -S --noconfirm --needed limine-snapper-sync limine-mkinitcpio-hook
+  sudo limine-update
 
   # Match Snapper configs if not installing from the ISO
-  if [[ -z ${OMARCHY_CHROOT_INSTALL:-} ]]; then
+  if [ -z "${OMARCHY_CHROOT_INSTALL:-}" ]; then
     if ! sudo snapper list-configs 2>/dev/null | grep -q "root"; then
       sudo snapper -c root create-config /
     fi
@@ -97,7 +85,7 @@ EOF
 fi
 
 # Add UKI entry to UEFI machines to skip bootloader showing on normal boot
-if [[ -n $EFI ]] && efibootmgr &>/dev/null && ! efibootmgr | grep -q Omarchy &&
+if [ -n "$EFI" ] && efibootmgr &>/dev/null && ! efibootmgr | grep -q Omarchy &&
   ! cat /sys/class/dmi/id/bios_vendor 2>/dev/null | grep -qi "American Megatrends"; then
   sudo efibootmgr --create \
     --disk "$(findmnt -n -o SOURCE /boot | sed 's/p\?[0-9]*$//')" \

install/login/plymouth.sh

@@ -1,3 +1,5 @@
+#!/bin/bash
+
 # Hyprland launched via UWSM and login directly as user, rely on disk encryption + hyprlock for security
 
 # ==============================================================================
@@ -6,7 +8,7 @@
 
 if [ "$(plymouth-set-default-theme)" != "omarchy" ]; then
   sudo cp -r "$HOME/.local/share/omarchy/default/plymouth" /usr/share/plymouth/themes/omarchy/
-  sudo plymouth-set-default-theme omarchy
+  sudo plymouth-set-default-theme -R omarchy
 fi
 
 # ==============================================================================

install/omarchy-base.packages

@@ -1,131 +0,0 @@
-# Omarchy core package list installed via install/packages.sh
-# This file is also used by the ISO builder when determining needs
-
-1password-beta
-1password-cli
-alacritty
-asdcontrol-git
-avahi
-bash-completion
-bat
-blueberry
-brightnessctl
-btop
-cargo
-clang
-cups
-cups-browsed
-cups-filters
-cups-pdf
-docker
-docker-buildx
-docker-compose
-dust
-evince
-eza
-fastfetch
-fcitx5
-fcitx5-gtk
-fcitx5-qt
-fd
-ffmpegthumbnailer
-fontconfig
-fzf
-gcc14
-github-cli
-gnome-calculator
-gnome-keyring
-gnome-themes-extra
-gum
-gvfs-mtp
-gvfs-smb
-hypridle
-hyprland
-hyprland-qtutils
-hyprlock
-hyprpicker
-hyprshot
-hyprsunset
-imagemagick
-impala
-imv
-inetutils
-iwd
-jq
-kdenlive
-kvantum-qt5
-lazydocker
-lazygit
-less
-libqalculate
-libreoffice
-llvm
-localsend
-luarocks
-mako
-man
-mariadb-libs
-mise
-mpv
-nautilus
-noto-fonts
-noto-fonts-cjk
-noto-fonts-emoji
-noto-fonts-extra
-nss-mdns
-nvim
-obs-studio
-obsidian
-omarchy-chromium
-omarchy-lazyvim
-pamixer
-pinta
-playerctl
-plocate
-plymouth
-polkit-gnome
-postgresql-libs
-power-profiles-daemon
-python-gobject
-python-poetry-core
-python-terminaltexteffects
-qt5-wayland
-ripgrep
-satty
-signal-desktop
-slurp
-spotify
-starship
-sushi
-swaybg
-swayosd
-system-config-printer
-tldr
-tree-sitter-cli
-ttf-cascadia-mono-nerd
-ttf-ia-writer
-ttf-jetbrains-mono-nerd
-typora
-tzupdate
-ufw
-ufw-docker
-unzip
-uwsm
-walker-bin
-waybar
-wf-recorder
-whois
-wireless-regdb
-wiremix
-wireplumber
-wl-clip-persist
-wl-clipboard
-wl-screenrec
-woff2-font-awesome
-xdg-desktop-portal-gtk
-xdg-desktop-portal-hyprland
-xmlstarlet
-xournalpp
-yaru-icon-theme
-yay
-zoxide

install/omarchy-other.packages

@@ -1,59 +0,0 @@
-# Packages installed outside of install/packages.sh or optional packages
-# Utilized by ISO builder to ensure package availability in the ISO
-
-autoconf-archive
-base
-base-devel
-broadcom-wl
-btrfs-progs
-dart
-dkms
-efibootmgr
-egl-wayland
-git
-git
-gst-plugin-pipewire
-gtk4-layer-shell
-gum
-htop
-intel-media-driver
-intltool
-iwd
-jdk-openjdk
-jq
-lib32-nvidia-utils
-libpulse
-libsass
-libva-intel-driver
-libva-intel-driver
-libva-mesa-driver
-libva-nvidia-driver
-limine
-limine-mkinitcpio-hook
-limine-snapper-sync
-linux
-linux-firmware
-linux-headers
-mesa
-nvidia-dkms
-nvidia-open-dkms
-nvidia-utils
-openssl
-pipewire
-pipewire-alsa
-pipewire-jack
-pipewire-pulse
-plymouth
-qt5-remoteobjects
-qt6-wayland
-sassc
-snapper
-sof-firmware
-tzupdate
-webp-pixbuf-loader
-wget
-xf86-video-amdgpu
-xf86-video-ati
-xf86-video-nouveau
-yay-debug
-zram-generator

install/packages.sh

@@ -0,0 +1,129 @@
+#!/bin/bash
+
+sudo pacman -S --noconfirm --needed \
+  1password-beta \
+  1password-cli \
+  asdcontrol-git \
+  alacritty \
+  avahi \
+  bash-completion \
+  bat \
+  blueberry \
+  brightnessctl \
+  btop \
+  cargo \
+  clang \
+  cups \
+  cups-browsed \
+  cups-filters \
+  cups-pdf \
+  docker \
+  docker-buildx \
+  docker-compose \
+  dust \
+  evince \
+  eza \
+  fastfetch \
+  fcitx5 \
+  fcitx5-gtk \
+  fcitx5-qt \
+  fd \
+  ffmpegthumbnailer \
+  fontconfig \
+  fzf \
+  gcc14 \
+  github-cli \
+  gnome-calculator \
+  gnome-keyring \
+  gnome-themes-extra \
+  gum \
+  gvfs-mtp \
+  gvfs-smb \
+  hypridle \
+  hyprland \
+  hyprland-qtutils \
+  hyprlock \
+  hyprpicker \
+  hyprshot \
+  hyprsunset \
+  imagemagick \
+  impala \
+  imv \
+  inetutils \
+  iwd \
+  jq \
+  kdenlive \
+  kvantum-qt5 \
+  lazydocker \
+  lazygit \
+  less \
+  libqalculate \
+  libreoffice \
+  llvm \
+  localsend \
+  luarocks \
+  mako \
+  man \
+  mariadb-libs \
+  mise \
+  mpv \
+  nautilus \
+  noto-fonts \
+  noto-fonts-cjk \
+  noto-fonts-emoji \
+  noto-fonts-extra \
+  nss-mdns \
+  nvim \
+  obs-studio \
+  obsidian \
+  omarchy-chromium \
+  pamixer \
+  pinta \
+  playerctl \
+  plocate \
+  plymouth \
+  polkit-gnome \
+  postgresql-libs \
+  power-profiles-daemon \
+  python-gobject \
+  python-poetry-core \
+  python-terminaltexteffects \
+  qt5-wayland \
+  ripgrep \
+  satty \
+  signal-desktop \
+  slurp \
+  spotify \
+  starship \
+  sushi \
+  swaybg \
+  swayosd \
+  system-config-printer \
+  tldr \
+  tree-sitter-cli \
+  ttf-cascadia-mono-nerd \
+  ttf-ia-writer \
+  ttf-jetbrains-mono-nerd \
+  typora \
+  tzupdate \
+  ufw \
+  ufw-docker \
+  unzip \
+  uwsm \
+  walker-bin \
+  waybar \
+  wf-recorder \
+  whois \
+  wiremix \
+  wireplumber \
+  wl-clip-persist \
+  wl-clipboard \
+  wl-screenrec \
+  woff2-font-awesome \
+  xdg-desktop-portal-gtk \
+  xdg-desktop-portal-hyprland \
+  xmlstarlet \
+  xournalpp \
+  yaru-icon-theme \
+  yay \
+  zoxide

install/packaging/all.sh

@@ -1,6 +0,0 @@
-run_logged $OMARCHY_INSTALL/packaging/base.sh
-run_logged $OMARCHY_INSTALL/packaging/fonts.sh
-run_logged $OMARCHY_INSTALL/packaging/lazyvim.sh
-run_logged $OMARCHY_INSTALL/packaging/icons.sh
-run_logged $OMARCHY_INSTALL/packaging/webapps.sh
-run_logged $OMARCHY_INSTALL/packaging/tuis.sh

install/packaging/base.sh

@@ -1,3 +0,0 @@
-# Install all base packages
-mapfile -t packages < <(grep -v '^#' "$OMARCHY_INSTALL/omarchy-base.packages" | grep -v '^$')
-sudo pacman -S --noconfirm --needed "${packages[@]}"

install/packaging/fonts.sh

@@ -1,3 +1,5 @@
+#!/bin/bash
+
 # Omarchy logo in a font for Waybar use
 mkdir -p ~/.local/share/fonts
 cp ~/.local/share/omarchy/config/omarchy.ttf ~/.local/share/fonts/

install/packaging/icons.sh

@@ -1,4 +0,0 @@
-# Copy all bundled icons to the applications/icons directory
-ICON_DIR="$HOME/.local/share/applications/icons"
-mkdir -p "$ICON_DIR"
-cp ~/.local/share/omarchy/applications/icons/*.png "$ICON_DIR/"