Add omarchy-doctor

2026-02-17 15:25:37 +00:00 · 2025-09-28 00:41:37 -04:00
parent 0b172dbef1
commit 57a977a51d
40 changed files with 1032 additions and 356 deletions
--- a/install/config/hardware/bluetooth.sh
+++ b/install/config/hardware/bluetooth.sh
@@ -1,2 +1,9 @@
-# Turn on bluetooth by default
-chrootable_systemctl_enable bluetooth.service
+OMARCHY_DESCRIPTION="Enable Bluetooth Service"
+
+omarchy_install() {
+  chrootable_systemctl_enable bluetooth.service
+}
+
+omarchy_verify() {
+  systemctl is-enabled bluetooth.service >/dev/null 2>&1 || add_error "Bluetooth service not enabled"
+}
--- a/install/config/hardware/fix-apple-bcm4360.sh
+++ b/install/config/hardware/fix-apple-bcm4360.sh
@@ -1,5 +1,18 @@
-# Install wifi drivers for 2013-2015 MacBooks using the BCM4360 chip
-if lspci -nnv | grep -A2 "14e4:43a0" | grep -q "106b:"; then
+OMARCHY_DESCRIPTION="Apple BCM4360 WiFi Driver"
+
+should_run() {
+  lspci -nnv | grep -A2 "14e4:43a0" | grep -q "106b:"
+}
+
+omarchy_install() {
+  should_run || return 0
+
  echo "Apple BCM4360 detected"
  sudo pacman -S --noconfirm --needed broadcom-wl dkms linux-headers
-fi
+}
+
+omarchy_verify() {
+  should_run || return 2
+
+  omarchy-pkg-present broadcom-wl || add_error "Broadcom wireless driver not installed"
+}
--- a/install/config/hardware/fix-apple-spi-keyboard.sh
+++ b/install/config/hardware/fix-apple-spi-keyboard.sh
@@ -1,7 +1,23 @@
-# Detect MacBook models that need SPI keyboard modules
-if [[ "$(cat /sys/class/dmi/id/product_name 2>/dev/null)" =~ MacBook12,1|MacBookPro13,[123]|MacBookPro14,[123] ]]; then
-  echo "Detected MacBook with SPI keyboard"
+OMARCHY_DESCRIPTION="MacBook SPI Keyboard Support"

+should_run() {
+  [[ "$(cat /sys/class/dmi/id/product_name 2>/dev/null)" =~ MacBook12,1|MacBookPro13,[123]|MacBookPro14,[123] ]]
+}
+
+omarchy_install() {
+  should_run || return 0
+
+  echo "Detected MacBook with SPI keyboard"
  sudo pacman -S --noconfirm --needed macbook12-spi-driver-dkms
  echo "MODULES=(applespi intel_lpss_pci spi_pxa2xx_platform)" | sudo tee /etc/mkinitcpio.conf.d/macbook_spi_modules.conf >/dev/null
-fi
+}
+
+omarchy_verify() {
+  should_run || return 2  # Return 2 to indicate "not applicable"
+
+  # Check if driver is installed
+  pacman -Q macbook12-spi-driver-dkms &>/dev/null || add_error "MacBook SPI driver not installed"
+
+  # Check if mkinitcpio config exists
+  [[ -f /etc/mkinitcpio.conf.d/macbook_spi_modules.conf ]] || add_error "MacBook SPI modules config missing"
+}
--- a/install/config/hardware/fix-apple-t2.sh
+++ b/install/config/hardware/fix-apple-t2.sh
@@ -1,15 +1,23 @@
-# Detect T2 MacBook models using PCI IDs
-# Vendor: 106b (Apple), Device IDs: 1801 or 1802 (T2 Security Chip)
-if lspci -nn | grep -q "106b:180[12]"; then
+OMARCHY_DESCRIPTION="Apple T2 MacBook Support"
+
+# Detect T2 MacBook models using PCI IDs: 106b:1801 or 106b:1802
+should_run() {
+  lspci -nn | grep -q "106b:180[12]"
+}
+
+# Installation function
+omarchy_install() {
+  should_run || return 0
+
  echo "Detected MacBook with T2 chip. Installing support items..."

  sudo pacman -S --noconfirm --needed \
-    linux-t2 \
-    linux-t2-headers \
-    apple-t2-audio-config \
-    apple-bcm-firmware \
-    t2fanrd \
-    tiny-dfr
+      linux-t2 \
+      linux-t2-headers \
+      apple-t2-audio-config \
+      apple-bcm-firmware \
+      t2fanrd \
+      tiny-dfr

  echo "apple-bce" | sudo tee /etc/modules-load.d/t2.conf >/dev/null

@@ -20,9 +28,22 @@ if lspci -nn | grep -q "106b:180[12]"; then
 options brcmfmac feature_disable=0x82000
 EOF

-  sudo mkdir -p /etc/limine-entry-tool.d
-  cat <<EOF | sudo tee /etc/limine-entry-tool.d/t2-mac.conf >/dev/null
+    sudo mkdir -p /etc/limine-entry-tool.d
+    cat <<EOF | sudo tee /etc/limine-entry-tool.d/t2-mac.conf >/dev/null
 # Generated by Omarchy installer for T2 Mac support
 KERNEL_CMDLINE[default]+="intel_iommu=on iommu=pt pcie_ports=compat"
 EOF
-fi
+}
+
+# Verification function
+omarchy_verify() {
+  should_run || return 2
+
+  pacman -Q linux-t2 &>/dev/null || add_error "T2 Linux kernel not installed"
+
+  # Check if config files exist
+  [[ -f /etc/modules-load.d/t2.conf ]] || add_error "T2 modules config missing"
+  [[ -f /etc/mkinitcpio.conf.d/apple-t2.conf ]] || add_error "T2 mkinitcpio config missing"
+  [[ -f /etc/modprobe.d/brcmfmac.conf ]] || add_error "T2 WiFi fix config missing"
+  [[ -f /etc/limine-entry-tool.d/t2-mac.conf ]] || add_error "T2 boot config missing"
+}
--- a/install/config/hardware/fix-f13-amd-audio-input.sh
+++ b/install/config/hardware/fix-f13-amd-audio-input.sh
@@ -1,5 +1,18 @@
-AMD_AUDIO_CARD=$(pactl list cards 2>/dev/null | grep -B20 "Family 17h/19h" | grep "Name: " | awk '{print $2}' || true)
+OMARCHY_DESCRIPTION="Framework 13 AMD Audio Input Fix"
+
+should_run() {
+  AMD_AUDIO_CARD=$(pactl list cards 2>/dev/null | grep -B20 "Family 17h/19h" | grep "Name: " | awk '{print $2}' || true)
+  [[ -n "$AMD_AUDIO_CARD" ]]
+}
+
+omarchy_install() {
+  should_run || return 0

-if [[ -n $AMD_AUDIO_CARD ]]; then
  pactl set-card-profile "$AMD_AUDIO_CARD" "HiFi (Mic1, Mic2, Speaker)" 2>/dev/null || true
-fi
+}
+
+omarchy_verify() {
+  should_run || return 2
+
+  pactl list cards | grep -A10 "$AMD_AUDIO_CARD" | grep -q "Active Profile:" || add_error "AMD audio profile not configured"
+}
--- a/install/config/hardware/fix-fkeys.sh
+++ b/install/config/hardware/fix-fkeys.sh
@@ -1,4 +1,16 @@
-# Ensure that F-keys on Apple-like keyboards (such as Lofree Flow84) are always F-keys
-if [[ ! -f /etc/modprobe.d/hid_apple.conf ]]; then
-  echo "options hid_apple fnmode=2" | sudo tee /etc/modprobe.d/hid_apple.conf
-fi
+OMARCHY_DESCRIPTION="Set F-keys as F-keys by default"
+
+omarchy_install() {
+  # Ensure that F-keys on Apple-like keyboards (such as Lofree Flow84) are always F-keys
+  if [[ ! -f /etc/modprobe.d/hid_apple.conf ]]; then
+      echo "options hid_apple fnmode=2" | sudo tee /etc/modprobe.d/hid_apple.conf
+  fi
+}
+
+omarchy_verify() {
+  [[ -f /etc/modprobe.d/hid_apple.conf ]] || add_error "Apple HID config missing"
+
+  if [[ -f /etc/modprobe.d/hid_apple.conf ]]; then
+      grep -q "options hid_apple fnmode=2" /etc/modprobe.d/hid_apple.conf || add_error "F-key mode not configured"
+  fi
+}
--- a/install/config/hardware/ignore-power-button.sh
+++ b/install/config/hardware/ignore-power-button.sh
@@ -1,2 +1,15 @@
-# Disable shutting system down on power button to bind it to power menu afterwards
-sudo sed -i 's/.*HandlePowerKey=.*/HandlePowerKey=ignore/' /etc/systemd/logind.conf
+OMARCHY_DESCRIPTION="Disable power button"
+
+omarchy_install() {
+  # Disable shutting system down on power button to bind it to power menu afterwards
+  sudo sed -i 's/.*HandlePowerKey=.*/HandlePowerKey=ignore/' /etc/systemd/logind.conf
+}
+
+omarchy_verify() {
+  [[ -f /etc/systemd/logind.conf ]] || add_error "Logind config missing"
+
+  # Check if power button is set to ignore
+  if [[ -f /etc/systemd/logind.conf ]]; then
+      grep -q "^HandlePowerKey=ignore" /etc/systemd/logind.conf || add_error "Power button not set to ignore"
+  fi
+}
--- a/install/config/hardware/intel.sh
+++ b/install/config/hardware/intel.sh
@@ -1,11 +1,30 @@
-# This installs hardware video acceleration for Intel GPUs
-# Check if we have an Intel GPU at all
-if INTEL_GPU=$(lspci | grep -iE 'vga|3d|display' | grep -i 'intel'); then
+OMARCHY_DESCRIPTION="Setup Intel video acceleration"
+
+should_run() {
+  INTEL_GPU=$(lspci | grep -iE 'vga|3d|display' | grep -i 'intel' || true)
+  [[ -n "$INTEL_GPU" ]]
+}
+
+omarchy_install() {
+  should_run || return 0
+
  # HD Graphics and newer uses intel-media-driver
  if [[ "${INTEL_GPU,,}" =~ "hd graphics"|"xe"|"iris" ]]; then
-    sudo pacman -S --needed --noconfirm intel-media-driver
+      sudo pacman -S --needed --noconfirm intel-media-driver
  elif [[ "${INTEL_GPU,,}" =~ "gma" ]]; then
-    # Older generations from 2008 to ~2014-2017 use libva-intel-driver
-    sudo pacman -S --needed --noconfirm libva-intel-driver
+      # Older generations from 2008 to ~2014-2017 use libva-intel-driver
+      sudo pacman -S --needed --noconfirm libva-intel-driver
  fi
-fi
+}
+
+# Verification function
+omarchy_verify() {
+  should_run || return 2
+
+  # Check if appropriate driver is installed
+  if [[ "${INTEL_GPU,,}" =~ "hd graphics"|"xe"|"iris" ]]; then
+      pacman -Q intel-media-driver &>/dev/null || add_error "Intel media driver not installed"
+  elif [[ "${INTEL_GPU,,}" =~ "gma" ]]; then
+      pacman -Q libva-intel-driver &>/dev/null || add_error "Intel VA-API driver not installed"
+  fi
+}
--- a/install/config/hardware/network.sh
+++ b/install/config/hardware/network.sh
@@ -1,6 +1,14 @@
-# Ensure iwd service will be started
-sudo systemctl enable iwd.service
+OMARCHY_DESCRIPTION="Network Config"

-# Prevent systemd-networkd-wait-online timeout on boot
-sudo systemctl disable systemd-networkd-wait-online.service
-sudo systemctl mask systemd-networkd-wait-online.service
+omarchy_install() {
+  sudo systemctl enable iwd.service
+
+  sudo systemctl disable systemd-networkd-wait-online.service
+  sudo systemctl mask systemd-networkd-wait-online.service
+}
+
+omarchy_verify() {
+  systemctl is-enabled iwd.service >/dev/null 2>&1 || add_error "IWD service not enabled"
+
+  systemctl is-enabled systemd-networkd-wait-online.service 2>&1 | grep -q "masked" || add_error "systemd-networkd-wait-online not masked"
+}
--- a/install/config/hardware/nvidia.sh
+++ b/install/config/hardware/nvidia.sh
@@ -1,31 +1,28 @@
-# ==============================================================================
-# Hyprland NVIDIA Setup Script for Arch Linux
-# ==============================================================================
-# This script automates the installation and configuration of NVIDIA drivers
-# for use with Hyprland on Arch Linux, following the official Hyprland wiki.
-#
-# Author: https://github.com/Kn0ax
-#
-# ==============================================================================
+OMARCHY_DESCRIPTION="NVIDIA GPU Configuration"
+
+should_run() {
+  NVIDIA_GPU=$(lspci | grep -i 'nvidia' || true)
+  [[ -n "$NVIDIA_GPU" ]]
+}
+
+omarchy_install() {
+  should_run || return 0

-# --- GPU Detection ---
-if [ -n "$(lspci | grep -i 'nvidia')" ]; then
-  # --- Driver Selection ---
  # Turing (16xx, 20xx), Ampere (30xx), Ada (40xx), and newer recommend the open-source kernel modules
-  if echo "$(lspci | grep -i 'nvidia')" | grep -q -E "RTX [2-9][0-9]|GTX 16"; then
-    NVIDIA_DRIVER_PACKAGE="nvidia-open-dkms"
+  if echo "$NVIDIA_GPU" | grep -q -E "RTX [2-9][0-9]|GTX 16"; then
+      NVIDIA_DRIVER_PACKAGE="nvidia-open-dkms"
  else
-    NVIDIA_DRIVER_PACKAGE="nvidia-dkms"
+      NVIDIA_DRIVER_PACKAGE="nvidia-dkms"
  fi

  # Check which kernel is installed and set appropriate headers package
  KERNEL_HEADERS="linux-headers" # Default
  if pacman -Q linux-zen &>/dev/null; then
-    KERNEL_HEADERS="linux-zen-headers"
+      KERNEL_HEADERS="linux-zen-headers"
  elif pacman -Q linux-lts &>/dev/null; then
-    KERNEL_HEADERS="linux-lts-headers"
+      KERNEL_HEADERS="linux-lts-headers"
  elif pacman -Q linux-hardened &>/dev/null; then
-    KERNEL_HEADERS="linux-hardened-headers"
+      KERNEL_HEADERS="linux-hardened-headers"
  fi

  # force package database refresh
@@ -67,9 +64,9 @@ if [ -n "$(lspci | grep -i 'nvidia')" ]; then
  sudo mkinitcpio -P

  # Add NVIDIA environment variables to hyprland.conf
-  HYPRLAND_CONF="$HOME/.config/hypr/hyprland.conf"
+  HYPRLAND_CONF="$HOME/.config/hypr/envs.conf"
  if [ -f "$HYPRLAND_CONF" ]; then
-    cat >>"$HYPRLAND_CONF" <<'EOF'
+      cat >>"$HYPRLAND_CONF" <<'EOF'

 # NVIDIA environment variables
 env = NVD_BACKEND,direct
@@ -77,4 +74,22 @@ env = LIBVA_DRIVER_NAME,nvidia
 env = __GLX_VENDOR_LIBRARY_NAME,nvidia
 EOF
  fi
-fi
+}
+
+omarchy_verify() {
+  should_run || return 2
+
+  pacman -Q nvidia-dkms &>/dev/null || pacman -Q nvidia-open-dkms &>/dev/null || add_error "NVIDIA driver not installed"
+
+  [[ -f /etc/modprobe.d/nvidia.conf ]] || add_error "NVIDIA modprobe config missing"
+
+  if [[ -f /etc/modprobe.d/nvidia.conf ]]; then
+      grep -q "options nvidia_drm modeset=1" /etc/modprobe.d/nvidia.conf || add_error "NVIDIA DRM modeset not enabled"
+  fi
+
+  grep -q "nvidia" /etc/mkinitcpio.conf || add_error "NVIDIA modules not in mkinitcpio.conf"
+
+  if [[ -f "$HOME/.config/hypr/hyprland.conf" ]]; then
+      grep -q "LIBVA_DRIVER_NAME,nvidia" "$HOME/.config/hypr/hyprland.conf" || add_error "NVIDIA env vars not in Hyprland config"
+  fi
+}
--- a/install/config/hardware/printer.sh
+++ b/install/config/hardware/printer.sh
@@ -1,16 +1,32 @@
-chrootable_systemctl_enable cups.service
+OMARCHY_DESCRIPTION="Printer Config"

-# Disable multicast dns in resolved. Avahi will provide this for better network printer discovery
-sudo mkdir -p /etc/systemd/resolved.conf.d
-echo -e "[Resolve]\nMulticastDNS=no" | sudo tee /etc/systemd/resolved.conf.d/10-disable-multicast.conf
-chrootable_systemctl_enable avahi-daemon.service
+omarchy_install() {
+  chrootable_systemctl_enable cups.service

-# Enable mDNS resolution for .local domains
-sudo sed -i 's/^hosts:.*/hosts: mymachines mdns_minimal [NOTFOUND=return] resolve [!UNAVAIL=return] files myhostname dns/' /etc/nsswitch.conf
+  # Disable multicast dns in resolved. Avahi will provide this for better network printer discovery
+  sudo mkdir -p /etc/systemd/resolved.conf.d
+  echo -e "[Resolve]\nMulticastDNS=no" | sudo tee /etc/systemd/resolved.conf.d/10-disable-multicast.conf
+  chrootable_systemctl_enable avahi-daemon.service

-# Enable automatically adding remote printers
-if ! grep -q '^CreateRemotePrinters Yes' /etc/cups/cups-browsed.conf; then
-  echo 'CreateRemotePrinters Yes' | sudo tee -a /etc/cups/cups-browsed.conf
-fi
+  # Enable mDNS resolution for .local domains
+  sudo sed -i 's/^hosts:.*/hosts: mymachines mdns_minimal [NOTFOUND=return] resolve [!UNAVAIL=return] files myhostname dns/' /etc/nsswitch.conf

-chrootable_systemctl_enable cups-browsed.service
+  # Enable automatically adding remote printers
+  if ! grep -q '^CreateRemotePrinters Yes' /etc/cups/cups-browsed.conf; then
+      echo 'CreateRemotePrinters Yes' | sudo tee -a /etc/cups/cups-browsed.conf
+  fi
+
+  chrootable_systemctl_enable cups-browsed.service
+}
+
+omarchy_verify() {
+  systemctl is-enabled cups.service >/dev/null 2>&1 || add_error "CUPS service not enabled"
+  systemctl is-enabled avahi-daemon.service >/dev/null 2>&1 || add_error "Avahi daemon not enabled"
+  systemctl is-enabled cups-browsed.service >/dev/null 2>&1 || add_error "CUPS browsed service not enabled"
+
+  [[ -f /etc/systemd/resolved.conf.d/10-disable-multicast.conf ]] || add_error "Multicast DNS config missing"
+
+  grep -q "mdns_minimal" /etc/nsswitch.conf || add_error "mDNS not configured in nsswitch.conf"
+
+  [[ -f /etc/cups/cups-browsed.conf ]] && grep -q '^CreateRemotePrinters Yes' /etc/cups/cups-browsed.conf || add_error "Remote printers not enabled in CUPS"
+}
--- a/install/config/hardware/set-wireless-regdom.sh
+++ b/install/config/hardware/set-wireless-regdom.sh
@@ -1,33 +1,37 @@
-# First check that wireless-regdb is there
-if [ -f "/etc/conf.d/wireless-regdom" ]; then
-  unset WIRELESS_REGDOM
-  . /etc/conf.d/wireless-regdom
-fi
+OMARCHY_DESCRIPTION="Wireless Regdom"

-# If the region is already set, we're done
-if [ ! -n "${WIRELESS_REGDOM}" ]; then
-  # Get the current timezone
-  if [ -e "/etc/localtime" ]; then
-    TIMEZONE=$(readlink -f /etc/localtime)
-    TIMEZONE=${TIMEZONE#/usr/share/zoneinfo/}
+omarchy_install() {
+  if [ -f "/etc/conf.d/wireless-regdom" ]; then
+      unset WIRELESS_REGDOM
+      . /etc/conf.d/wireless-regdom
+  fi

-    # Some timezones are formatted with the two letter country code at the start
-    COUNTRY="${TIMEZONE%%/*}"
+  if [ ! -n "${WIRELESS_REGDOM}" ]; then
+    if [ -e "/etc/localtime" ]; then
+      TIMEZONE=$(readlink -f /etc/localtime)
+      TIMEZONE=${TIMEZONE#/usr/share/zoneinfo/}

-    # If we don't have a two letter country, get it from the timezone table
-    if [[ ! "$COUNTRY" =~ ^[A-Z]{2}$ ]] && [ -f "/usr/share/zoneinfo/zone.tab" ]; then
-      COUNTRY=$(awk -v tz="$TIMEZONE" '$3 == tz {print $1; exit}' /usr/share/zoneinfo/zone.tab)
-    fi
+      COUNTRY="${TIMEZONE%%/*}"

-    # Check if we have a two letter country code
-    if [[ "$COUNTRY" =~ ^[A-Z]{2}$ ]]; then
-      # Append it to the wireless-regdom conf file that is used at boot
-      echo "WIRELESS_REGDOM=\"$COUNTRY\"" | sudo tee -a /etc/conf.d/wireless-regdom >/dev/null
+      if [[ ! "$COUNTRY" =~ ^[A-Z]{2}$ ]] && [ -f "/usr/share/zoneinfo/zone.tab" ]; then
+        COUNTRY=$(awk -v tz="$TIMEZONE" '$3 == tz {print $1; exit}' /usr/share/zoneinfo/zone.tab)
+      fi

-      # Also set it one off now
-      if command -v iw &>/dev/null; then
-        sudo iw reg set ${COUNTRY}
+      if [[ "$COUNTRY" =~ ^[A-Z]{2}$ ]]; then
+        echo "WIRELESS_REGDOM=\"$COUNTRY\"" | sudo tee -a /etc/conf.d/wireless-regdom >/dev/null
+
+        if command -v iw &>/dev/null; then
+            sudo iw reg set ${COUNTRY}
+        fi
      fi
    fi
  fi
-fi
+}
+
+omarchy_verify() {
+  [[ -f /etc/conf.d/wireless-regdom ]] || add_error "Wireless regdom config missing"
+
+  if [[ -f /etc/conf.d/wireless-regdom ]]; then
+      grep -q "^WIRELESS_REGDOM=" /etc/conf.d/wireless-regdom || add_error "Wireless regulatory domain not configured"
+  fi
+}
--- a/install/config/hardware/usb-autosuspend.sh
+++ b/install/config/hardware/usb-autosuspend.sh
@@ -1,5 +1,16 @@
-# Disable USB autosuspend to prevent peripheral disconnection issues
-if [[ ! -f /etc/modprobe.d/disable-usb-autosuspend.conf ]]; then
-  echo "options usbcore autosuspend=-1" | sudo tee /etc/modprobe.d/disable-usb-autosuspend.conf
-fi
+OMARCHY_DESCRIPTION="USB Autosuspend"

+omarchy_install() {
+  # Disable USB autosuspend to prevent peripheral disconnection issues
+  if [[ ! -f /etc/modprobe.d/disable-usb-autosuspend.conf ]]; then
+    echo "options usbcore autosuspend=-1" | sudo tee /etc/modprobe.d/disable-usb-autosuspend.conf
+  fi
+}
+
+omarchy_verify() {
+  [[ -f /etc/modprobe.d/disable-usb-autosuspend.conf ]] || add_error "USB autosuspend config missing"
+
+  if [[ -f /etc/modprobe.d/disable-usb-autosuspend.conf ]]; then
+    grep -q "options usbcore autosuspend=-1" /etc/modprobe.d/disable-usb-autosuspend.conf || add_error "USB autosuspend not disabled"
+  fi
+}